How to create a slide combining an FLV and jpeg for use in PP?

I am using the CS4 Master Collection. I want to integrate slides into my DVD curriculum project. I would like to use the flv as the background, put a slightly smaller jpeg (or other graphic) translucent tinted panel on top of it, and then my text. Can it be done?

What I have is a nice FLV from istockphoto that I want to use as sort of a bottom layer, put a static tinted translucent layer on top of it, and finally the text layer. Then put it in PP. It would make a nice slide I think as I move from the talking head to various graphics. Is there a Title template perhaps that is translucent that would show the FLV underneath and I could easily add the text?
Maybe this question should be posed in the Flash or Photoshop forum?

Similar Messages

Newbie Here - How to Create a Slide Show in CS5?

I am using Windows 7 and I am familiar with PSElements 8 where creating a slide show is easy. I just want to create a slide show in CS5 (in Bridge?? View>Slideshow Options?) using vacation photos from several folders, and I want to order them manually.
First, I can't figure out how to display more than one folder in the Content panel in Bridge. Second, I can't figure out how to create and intersperse "blank" slides with text.   Third (and I haven't even gotten this far yet), how do I save the slide show and burn a VCD? This was all so easy and intuitive in PSE8, I can't believe it seems nearly impossible in CS5!
As an alternative, should I simply re-save the photos as JPEGs (they are PSDs now), export them to a Desktop folder, open them in PSE8 and create the slide show there instead?   Thanks for any help and suggestions!

I am using Windows 7 and I am
familiar with PSElements 8 where creating a slide show is easy. I just
want to create a slide show in CS5 (in Bridge?? View>Slideshow
Options?) using vacation photos from several folders, and I want to
order them manually.
First, I can't figure out how to
display more than one folder in the Content panel in Bridge. Second, I
can't figure out how to create and intersperse "blank" slides with
text.   Third (and I haven't even gotten this far yet), how do I save
the slide show and burn a VCD? This was all so easy and intuitive in
PSE8, I can't believe it seems nearly impossible in CS5!
As
an alternative, should I simply re-save the photos as JPEGs (they are
PSDs now), export them to a Desktop folder, open them in PSE8 and create
the slide show there instead?   Thanks for any help and suggestions!
1) Bridge has a new feature (can't think of the term at the moment) but it works like instancing or virtual copies. Select all of the photo's that you want and place them in the "collection" (Ah I knew I would think of it) Move to another folder and move them into the same collection and so on. These are virtual copies in that they don't really exist, but are a link to the original images. You then can use the collection for the slide show.
2) Just create a page same size as your photo's in photoshop with what ever color background and put your text on it.
3A)The slide show can be exported as a pdf or swf. Windows can then copy the file to a cd. If you choose swf, you may need to alter the html file (I assume it generates one, if not it isn't har to create one) The html file would help the web browser determine the correct size to display at. If you have flash, it can be used to create a html file as well.
3B)If you would like the slide show to be displayed on a tv screen, then your cd/dvd will need to use a format that your dvd player can play, mp2 is the standard, but some can display jpg's, some are blue ray, etc. For exporting into the correct video format, then one of the following can be used. After Effects, Premeire pro, Encore, Photoshop (If you have quicktime installed and you are using one of the formats that quicktime supports like mp4)
If you have quicktime installed, paying the 20 bucks may be worth it as it will allow you to take your jpg images and generate an animation file as avi or mov. But can save as mp4 as well.
4) In Bridge you can select all of the images and run image processor on them. This plug in is part of photoshop there fore it will be in the menu's under photoshop. It will let you specify the files size, format and any actions, etc. It will then place them all into a folder that you specify.

How do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

how do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

You don't.
Slideshows are exported as movies and these are very large files. Email is not an appropriate medium for very large files as they can cause immense issues for the receiver.
Better to share some other way.
Regards
TD

How do create a slide show with both video and photos in elements 12

how do create a slide show with both video and photos in elements 12

Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view

How to create volume slider for flash cs 5 using action script 2.0?

how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
stop();
mySoundBtn.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip");
          mySoundC.start(0, 10); //10 represents the number of loops
          gotoAndPlay(2);
This sound plays till 3-4 scene ahead.
Can anyone help me?

Hey thnx Ned.
this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
Below is my slider code for sound.
onClipEvent (load) {
    mySound1 = new Sound();
    mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
    mySound1.onSoundComplete = function() {
    mySound1.start();
    mySound1.start(0.058,999);
onClipEvent (enterFrame) {
    downloaded = mySound1.getBytesLoaded();
    total = mySound1.getBytesTotal();
    if (downloaded != total) {
        _root.dl = "You have to buy this software...";
    } else {
        complete = 1;
        _root.dl = "";
    mySound1.setVolume(ratio * 2);
This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
Below is my button code.
stop();
mySoundBtn4.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip4");
          mySoundC.start(0, 300); //10 represents the number of loops
          gotoAndPlay("play1");
this is on button's frame.not exactly on button.
Button and Slider both are on diffrent scene.
Can you plese help me out?

Please tell me how to create a slider in the program Adobe Edge Reflow?

Please tell me how to create a slider in the program Adobe Edge Reflow?

There is no way to add animations in Reflow. If you want to add animation, then you can either use Muse which has many slider plugins to choose form or use the exported Reflow code in Brackets and add JavaScript for animating images there using various jquery plugins http://www.jssor.com/

How to created a Report to calculate On-Hand inventory for pending sales

hi,
how to created a Report to calculate On-Hand inventory for pending sales orders.for this report what are the tables and fields we have to use give me sample report.
thank you
radhakrishna.

Hi!
Tables:
VBAK - sales order header data
VBAP - sales order position data
VBUK - sales order status header data
VBUP - sales order status position data
VBELN field is the key between the tables.
Statuses in tables VBUK, VBUP: A-uncompleted, B-partially completed, C-fully completed
Regards
Tamá

How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

How to create a pie graph in 10g or 9i forms using beans??

Hi..
Please can anyone show me how to use pie graphs in oracle 10g or 9i forms using bean?
i also want to know how to put data in pie graph.. as u know in column graph for example we have an x-axis and y-axis,and in pie there is no x-axis and y-axis.. so how i can put the same data in pie graph.. and also i may need more than one value for the x-axis or the y-axis to use in pie graph so how can i do it??
i use set_custom_property to call properties in beans.
I would so thankful for how can answer me.. please its urgent
Thanks.

there are some other posts to this topic - How to create a pie graph in 10g or 9i forms using beans?? and so on.
use the search function of this forum. this may the fastest way for your urgent question

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create a slide combining an FLV and jpeg for use in PP?

Similar Messages

Maybe you are looking for