How to create a SRV record manually

I need to create the SRV record manually in order to join my Windows XP machines to the Xserve domain, How can I do this?

Drop this question, because lack of answer.

Similar Messages

  • How to create a DNS record for a domain itself (without a hostname)

    Hi,
    Normally, you can create a DNS record that points to the zone itself, e.g.:
    @               10800 IN A    196.197.200.201
    How do you accomplish that on a Mac OSX Lion Server? The DNS requires you to enter a hostname and it does not accept "@" as the hostname as it normally appears in the zone file.
    (manually modifying the host file does not work - I tried that ;-) )
    Any help is appreciated
    Thanks
    Bjoern Dirchsen

    Create either a blank record with a ., or a FQDN such as 'domain.com.' (note the trailing dot). Either of these should map to the domain name.

  • How do I add SRV record to my DNS for Office 365?

    How do I add the following record?
    Add the SIP SRV record for Lync web conferencing.
    Create a new SRV record.
    In the new record, make sure that the fields are set to precisely the following values:
    Record Type: SRV
    Service: _sip
    Protocol: _tls
    Port: 443
    Weight: 1
    Priority: 100
    TTL: Set this value to 1 hour or to the equivalent in minutes (60), seconds (3600), etc.
    Name: @
    Target: sipdir.online.lync.com
    Save the record.
    Need help ASAP because my clients Email is down when I changed Domain Name Servers to Business Catalyst.
    All Office 365 functions were lost.
    Thank you for some assistance - URGENT,
    Jim Vernon
    Hopegate Software

    Here is an image of the settings that Office 365 says i need to correct in my DNS settings on Business Catalyst:

  • How To Create the HP_TOOLS partition manually?

    Hello,
         According to HP, you can create the HP_TOOLS partition manually with type FAT32 and make the partition name HP_TOOLS. I installed Windows 8 on my MSata Drive after I upgraded it and for some reason you can't install the HP_TOOLS on those drives it always gives an error. So When you download the HP UEFI Support Environment from the drivers/software from HP, it will install it on the Hard Drive which I use as a backup drive now.
    However, when you restart the computer and hit F2, you do not have the full feature to even run a system check, I have to boot it from a USB instead. How do I fix this problem so I can do a "Custom" install back of the HP Tools and be able to use it without any issues?
    What I have done was create a partition on my msata with 2.01GB like it created on my HDD. I made it Fat32 and named it like it said HP_TOOLS. I then copied over the Folder from the HDD to the MSATA Drive. Still it does not work. Any advise would greatly be appreciated!

    Bump

  • How to create inbound JIT Call Manually?

    Hi All,
    Currently I am doing SAP JIT configuration. I have created the JIT Customer.
    Now I need to get a JIT call to determine the schedule lines in the scheduling agreements. In real scenario, JIT call comes through Idoc from the customer side.
    But I need to create JIT Call manually to do the configuration. So , How to create it? Is it Possible?
    Thanks,
    Anbazhagan E

    Use transaction JIT1
    Put in the Sold to customer number and the Ship to Partner description, just like in the first section of JITV, and put a unique value for this JIT Customer is the "Ext. JIT Call No." field.
    When you hit enter you will get the Call Components grid or both the Component Groups and the Call Components Grids (depending on what Maintenance Mode you selected on JITV).
    Let's assume your Mtce Mode = 3 - Discrete Material / Summ JC. Therefore you only get the Call Components grid on transaction JIT1.
    You need to fill in certain fields at a minimum, more depending on the JIT Call Configuration.
    Bare minimum, you need:
    1) Customer material or Material (if you fill in one, when the program finds the matching LZJ SA, it wil default the other)
    2) External Status (ex. ECRE or CR or whatever External status you have defined and linked to the CREA action in configuration)
    3) Planned Ship date or Planned Requirement date
    4) Quantity
    If when entering the Customer material or Material, the Sales Document and Sales Item is not populated, that means you do not have a matching LZJ type SD scheduling agreement in the system. Or the data you are entering on JIT1 does not exactly match.
    The SA must be there before you can do JIT1.
    The JITV entry must be there before you can set up the SA.
    Hope this helps at a basic level.
    You may need to enter additional data at the header of the Inbound JIT Call, or at the Call Components level, depending on a particular scenario or to correctly find the SA.
    If you have EDI that has come in and you want to create a similar JIT Call. Use the [Propose JIT Call button]
    On the 1st screen, enter the Sold to, Partner Desc and new JIT Call number.
    When you get to the 2nd screen, click the Propose JIT Call button, and enter the JIT Call you want to copy from. You just need to enter the External Status and new Planned Date. The materials and quantities and other fields get copied from the source JIT Call.

  • Step how to create a duplicate record button in APEX

    HI,
    Where do i find out the document step by step with the code behind on how to create a button to copy a record with master and detail in APEX.  My email address is [email protected]  Thanks.
    Thu Tran

    If you are using ADF BC you can also try this
    http://adftips.blogspot.com/2010/10/adf-model-creating-duplicate-row.html
    Regards
    Nicolas

  • How to create a sipinternaltls record and make it work?

    I  set up a Lync 2013 server environment and all end uses can log in Lync clients, communicate with others. however, I can't connect to the DNS server by UCMA api. It throws an exception: "No connection could be made because the
    target machine actively refused it 10.148.202.69:5061". So I thought it's a sip involved event.
    I typed _sipinternal._tcp.<domain> and it returns:
    Server: Unknown, Address:10.148.202.69( why the server is "unknown"?)
    I tried use telnet and it returns: could not open connection on port 5061.
    What should I do to make port 5061 work? Thanks.

    What is the error when you run the command nslookup?
    The default server is unknown because you didn’t create a PTR record in Reverse Lookup Zones to resolve to host name.
    Run the command netstat –ano | findstr 5061 on Lync Front End Server to check the port 5061 is opened.
    Lisa Zheng
    thank you Zheng. when i said error i means the "Unknown" word. After i entered the command,it returns:
    Server: Unknown
    Address: 10.148.202.69(my DNS server ip)
    Non-authoritative answer: _sipinternaltls._tcp.domain.com SRV service location:
    priority = 0
    weight = 0
    port = 5061
    svr hostname = lync.domain.com
    lync.domain.com internet address = 10.148.202.13
    lync.domain.com AAAA IPv6 address = ::1
    when i entered telnet 10.148.202.13 5061 or telnet 10.148.202.69 5061, both return failed connection. obviously the port 5061 is not open.

  • How to create STO Condition record for a condition Type ?

    I am doing config for STO.
    in MEK1 , it is asking for Vendor, but in my case I am doing STO by using delivery VL01 and receipt by MIGO.
    I want to know abt- How to create Condition Record for STO so that STO order will have Moving Average Price f Material.
    Sorry I m new to MM so pls help.

    Solved

  • How to creat a new record in the Db table

    Dear all,
    I am trying to update a DB table and i want to create new records in this table every time the user changes something on the screen,
    I want to append the DB table and not update it how should  i go about this???
    Regards,
    Vijay.
    PS:

    Hi
    User INSERT statement for the same...
    Please read the help...
    Cheers,
    Hakim

  • How to create a pagedefinition file manually..?

    Hi All,
    I know that jdeveloper will automatically creates a page definition file.. But i just want to know that "Can't we create that page-definition file manually??"
    Thanks in advance,
    Deepti

    Hi Arun,
    Thanks for responding immediately..!
    <?xml version="1.0" encoding="UTF-8" ?>
    <pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel" version="11.1.2.60.81" id="Dept01PageDef"
    Package="com.polaris.reporting.view.pageDefs" ControllerClass="com.polaris.reporting.view.CustomPage">
    <parameters/>
    <executables>
    <variableIterator id="variables"/>
    <iterator Binds="EmpVO1" RangeSize="25" DataControl="AppModuleDataControl" id="EmpVO1Iterator"/>
    <searchRegion Binds="EmpVO1Iterator" Criteria="" Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
    id="EmpVO1Query"/>
    <iterator Binds="DummyVo2" RangeSize="25" DataControl="AppModuleDataControl" id="DummyVo2Iterator"/>
    </executables>
    <bindings>
    <tree IterBinding="EmpVO1Iterator" id="EmpVO1">
    <nodeDefinition DefName="com.polaris.reporting.model.EmpVO" Name="EmpVO10">
    <AttrNames>
    <Item Value="Comm"/>
    <Item Value="Deptno"/>
    <Item Value="Empno"/>
    <Item Value="Ename"/>
    <Item Value="Hiredate"/>
    <Item Value="Job"/>
    <Item Value="Mgr"/>
    <Item Value="Sal"/>
    </AttrNames>
    </nodeDefinition>
    </tree>
    </bindings>
    </pageDefinition>
    I just want to know how the above page-definition file works.. I want to know the functionality of the tags like <executables>,<bindings> . If possible can u plz tell me the java classes that are associated with the page definition file

  • How to create required object types manually ?

    Hi all,
    I got this XML schema entry:
    <xs:element name="Chapters"
    minOccurs="0"
    maxOccurs="1"
    xdb:SQLName="CHAPTERS"
              xdb:SQLType="XDB_CHAPTERS_TYPE">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="Chapter"
              xdb:SQLName="CHAPTER"
    xdb:SQLCollType="XDB_CHAPTERS_COLLECTION"               
                   minOccurs="1"
                   maxOccurs="unbounded"
                   xdb:SQLType="XDB_CHAPTER_DETAILS_TYPE">
         <xs:complexType>
              <xs:simpleContent>
              <xs:extension base="xs:string">
              <xs:attribute name="No"
                        type="xs:positiveInteger"
                        xdb:SQLName="NO"/>
              </xs:extension>
              </xs:simpleContent>
         </xs:complexType>
         </xs:element>
         </xs:sequence>
         </xs:complexType>
    </xs:element>
    which results in this entry in a XML file:
    <Chapters>
    <Chapter No="12">The Longest Time</Chapter>
    </Chapters>
    Question: How do I have to create the corresponding object type, which is required for XML schema registration ?
    Any help is appreciated...
    Regards Markus

    Hi Markus
    I don't know why you want to manually creates the types... anyway since it can by quite complex to write all CREATE TYPE statement for a real schema... here my suggestion:
    1) activate a tracing with the following statement
    ALTER SESSION SET EVENTS '31098 TRACE NAME CONTEXT FOREVER'
    2) register the schema with GENTYPES=&gt;TRUE
    3) in a trace file under UDUMP you find all the statements executed, therefore the CREATE TYPE as well
    4) use these statement as basis for your scripts
    Chris

  • How to Create one TLB Order manually with multiple deployed STR's

    Hello,
    We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
    APO generates multiple orders for each item.
    Business requirement is to generate one TLB Order.   
    For example there are 10 Confirmed STR's and the  planner wants to choose the deployed STR's manually from the list of 10 products.   When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
    Is there a way to restrict the requested lines to be in one Order?  So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
    Regards,
    Bhavesh

    Hi Bhavesh,
                   By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
    Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
    Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
    You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
    If you want to automate this then you need to look out for BADI... not sure possible or not
    Regards
    Thennarasu.M

  • How to create multiple detail records dynamically  ?

    Hi All,
    I have a master-detail Form. I would like to display 5 records from details in my form. After entering data in 5 records in my detail how do I create a new detail record. And how can I get a scroll bar to manage them ? Right now all I could do is just create 5 records as default while designing the form.
    Can anyone please help me out ASAP.
    Thanks very much,
    Murali
    [email protected]

    Hi murali,
    Currently this is the way how MD forms works.If you wish to add more records in one go you can set at the design time for more no of detail records using "Number of Detail Rows to Display" in the Detail section .There is no provision of scrollbars at present.
    The other time when you enter just enter the Master form's key value with "Master action" set to none and just insert the Detail Form's record using the "Detail actions " to Insert.
    Hope it helps.
    rahul

  • How to create JAX-RPC WS manually

    I have a static WSDL file. Do you have any step by step instructions that show how to generate a JAX-RPC artifacts manually please? I can't do it using JDeveloper because my WSDL file is big so I got out of memory error when I tried to use JDev even though I increased the VM memory for JDev to 1024M already.
    That's why I have no choice but to generate the JAX-RPC artifacts manually.
    I'm using 10.3.1 WL.
    Thanks

    Ok just as I expected. So I guess I am left with the following two options
    1) either I switched to using JAXB in my apps instaed of xmlbeans....
    2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
    Programming Web Services for WebLogic Server (ant tasks)
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
    Getting Started With WebLogic Web Services Using JAX-RPC
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
    Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

  • How to create the condition record by ABAP program

    Hi Friends,
    I want to create/change the condition record of PR00 by ABAP program. It seems that there have no such BAPI/standard function can help on this. Can any one of you point out a way to me?? Thanks in addvance.
    Joe GR.

    Joe,
      Check with below FM..
    BAPI_PRICES_CONDITIONS.
    Check this link:
    Re: Sample code for  BAPI_PRICES_CONDITIONS
    examples....
    http://www.4ap.de/abap/bapi_prices_conditions.php
    Two useful threads on Same topic
    Re: Sample code for  BAPI_PRICES_CONDITIONS
    Re: Problem with BAPI_PRICES_CONDITIONS
    BAPI_PRICES_CONDITIONS
    Please check this sample code from other thread.
    wtable1-table_no = '306'.
    wtable1-applicatio = 'V'.
    wtable1-cond_type = 'ZPR0'.
    wtable1-operation = '009'.
    wtable1-varkey = '13001001USD 000000000050068946'.
    wtable1-valid_to = '99991231'.
    wtable1-valid_from = '20051101'.
    wtable1-cond_no = '$000000001'.
    APPEND wtable1 TO table1.
    wtable2-operation = '009'.
    wtable2-cond_no = '$000000001'.
    wtable2-created_by = sy-uname.
    wtable2-creat_date = '20051022'.
    wtable2-cond_usage = 'A'.
    wtable2-table_no = '110'.
    wtable2-applicatio = 'V'.
    wtable2-cond_type = 'ZPR0'.
    wtable2-varkey = '13001001USD 000000000050068946'.
    wtable2-valid_from = '20051101'.
    wtable2-valid_to = '99991231'.
    APPEND wtable2 TO table2.
    wtable3-operation = '009'.
    wtable3-cond_no = '$000000001'.
    wtable3-cond_count = '01'.
    wtable3-applicatio = 'V'.
    wtable3-cond_type = 'ZPR0'.
    wtable3-scaletype = 'A'.
    wtable3-scalebasin = 'C'.
    wtable3-scale_qty = '1'.
    wtable3-cond_p_unt = '1'.
    wtable3-cond_unit = 'EA'.
    wtable3-calctypcon = 'C'.
    wtable3-cond_value = '454'.
    wtable3-condcurr = 'USD'.
    APPEND wtable3 TO table3.
    CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
    EXPORTING
    PI_initialmode = 'X'
    PI_BLOCKNUMBER =
    TABLES
    ti_bapicondct = table1
    ti_bapicondhd = table2
    ti_bapicondit = table3
    ti_bapicondqs = table4
    ti_bapicondvs = table5
    to_bapiret2 = table6
    to_bapiknumhs = table7
    to_mem_initial = table8
    EXCEPTIONS
    update_error = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    READ TABLE table6 WITH KEY type = 'E' TRANSPORTING NO FIELDS.
    IF sy-subrc = 0.
    loop at table6 into ret.
    write: / ret-type, ret-message, ret-id, RET-LOG_NO, RET-LOG_MSG_NO,
    RET-MESSAGE_V1, RET-MESSAGE_V2, RET-MESSAGE_V3, RET-MESSAGE_V4,
    RET-PARAMETER,RET-ROW,RET-FIELD.
    endloop.
    ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    *EXPORTING
    WAIT =
    IMPORTING
    return = ret
    ENDIF.
    Don't forget to reward if useful....

Maybe you are looking for