How to create a subform with several initialized rows?

I have a repeating subform in my form that should start with several initialized rows.
I can create several empty rows by setting the binding to "repeat subform for each data item" and setting the "min count", but I'd like to have values in one of the columns so this doesn't get me there.
I can create multiple instances of my named subform and initialize the value for the column in question, but then if I have the "repeat subform for each data item" checked I get additional dups of all but the first row and the delete button (with click action "this.parent.instanceManager.removeInstance(this.parent.index);") and add button (click action "_rates.addInstance(1)") behave erratically. By this I mean the add button sometimes adds rows with values that have been deleted previously, and the delete button sometimes pops up an alert saying something like "topmostSubform[0]:Page1[0]:rates[10]:delete_button[0].click Index value is out of bounds".
There is no binding to a data source where I could pull the values for the column I wish to initialize. I feel I'm close, if only I could find the correct settings for the binding palette.
Thanks for any suggestions!

Thank you for the suggesting Srini. I'm trying to implement but struggling with the scripting for the buttons and the binding settings.
I've tried the following for the click action for the delete buttons in each row:
     this.parent.instanceManager.removeInstance(this.parent.index);
and this for the click action for the add button under the table:
     rate_table._Row1.addInstance(true);
When I click on delete the javascript debugger pops up and tells me:
     GeneralError: Operation failed.
     XFAObject.removeInstance:1:XFA:topmostSubform[0]:Page1[0]:rate_table[0]:Row2[0]:delete_bu tton[0]:click
     The element [min] has violated its allowable number of occurrences.
and when I click the add button the debugger tells me:
     General Error: Operation failed.
     XFAObject:addInstance:1:XFA:topmostSubform[0]:Page1[0]:#subform[16]:add_rates_button[0]:c lick
     The element [max] has violated its allowable number of occurences.
Sounds like my binding settings are wrong, but I haven't been able to determine a correct combination. Can you assist?
Thanks in advance!

Similar Messages

How to create editable table with one empty row ?

I'm looking for solution how to create editable table with one empty row using ADF BC. I have seen this solution in application that was created in JHeadstart and it's very well idea to use it insead of creation form.

hammm, i do it this:
drop the VO on the page, select Table->ADF Table....
so, drop the botton create, from de VO->operations->create (the firts), and right botton (mouse) Edit binding....
in Data collection select the VO, in Select an action select CreateInsert
luck

PSE 8: How to create a pdf with several pages?

I want to deliver DINA4-Sheets (thats bacic European standard size of a sheet of paper for let's say writing an official letter) to print out in a copy-shop. Now the copy-shop-owner says, for him it will be much easier if I hand in my 10-20 pages in one pdf-file with 10-20 pages and not 10-20 single-paged pdf-files, cause then he only needs to do the colour-routines and adjustings once and not many times. Now there is the problem, in Elements 8 there is the option to save a psd as a pdf-file, but I don't know how to add the other files and make a pdf with more pages than just one. May be I need to do that with Scribus, a freeware prog.

Hello Barbara!
Your answer just proved extremely helpful. It worked that way. I first created a pse-file in the right document size. Then with copy and paste I imported the first page and flattened it to one layer. Then I chose to create the second pse-page, that shows automatically in the menue then with the pse-file open. Into the second page again with copy and paste I imported the second single sheet and flattened the second page too to one layer and so on. That way it works. Finally I first save in the pse-file and then save the whole thing as pdf.
Very easy to do. Thanks a lot!

How to create a list with auto-updating rows?

Hi
I'm working on a project in flex (first time) and I was wondering if it's possible to create a datalist that's updating itself when the cursor clicks away from the row? and if the row is empty to delete the row from the database?
Haven't found any usefull information on this, hope someone can help or push me in de right direction.
Where's the best way to find help on flex btw?
Damian

You can find flex help at this link
http://livedocs.adobe.com/flex/3/html/help.html?content=data_access_4.html
If this post answers your question or helps, please kindly mark it as such.

How to create a wiki with iWeb ?

Hi !
Any idea about how to create a wiki with iWeb ?
I want to make a school web page but, instead of doing it myself, I thought it would be more interesting to make every student contribute - that's the point of making a wiki ! Could anyone help me ?
Many thanks !
Cheers.
Chris.

I know Apple's tools are VERY compelling and tremendously cool to use, but, given the collaborative nature of this endeavor, you may want to look at some internet enabled tools that, by their nature, allow many users to update the content from anywhere.
Currently, if you're editing a page in iWeb, the information for that site is kept in the domain.sites folder. For several people editing the site, you would have to shuttle this file back and forth between all the users. If user A is currently editing the site, user B would have to wait until they're finished to get the file. If user A wants to make some changes, they'd have to wait until user B sends the file back to them and we haven't even got to the point of letting user C, D, or E have access to the content in order to make updates!! Add everyone else in the school and you would have to make sure this one file makes it across tens of computers without becoming corrupted and making sure that only one person is making changes at a time. This would limit the number of updates that can be handled on a regular basis (what if user M gets ill before handing it off to user N, now NO one can make updates until user M remembers where they left the content... if they didn't erase it).
However, if you're willing to severely limit the scope of what a wiki is, then you can get input from everyone and enter it with just a few users that have access to edit the content.

How to create a window with its own window border other than the local system window border?

How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane.
In JavaSE, there seems to have the paintComponent() method for the JFrame to realize the effect.

Not sure why your code is doing that. I usually use an ObjectProperty<Point2D> to hold the initial coordinates of the mouse press, and set it to null on a mouse release. That seems to avoid the dragging being confused by mouse interaction with other nodes.
import javafx.application.Application;
import javafx.application.Platform;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.collections.FXCollections;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ChoiceBox;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.AnchorPane;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
import javafx.stage.Window;
public class CustomBorderExample extends Application {
@Override
public void start(Stage primaryStage) {
AnchorPane root = new AnchorPane();
root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
enableDragging(root);
StackPane mainContainer = new StackPane();
    AnchorPane.setTopAnchor(mainContainer, 5.0);
    AnchorPane.setLeftAnchor(mainContainer, 5.0);
    AnchorPane.setRightAnchor(mainContainer, 5.0);
    AnchorPane.setBottomAnchor(mainContainer, 5.0);
mainContainer.setStyle("-fx-background-color: aliceblue;");
root.getChildren().add(mainContainer);
primaryStage.initStyle(StageStyle.TRANSPARENT);
final ChoiceBox<String> choiceBox = new ChoiceBox<>(FXCollections.observableArrayList("Item 1", "Item 2", "Item 3"));
final Button closeButton = new Button("Close");
VBox vbox = new VBox(10);
vbox.setAlignment(Pos.CENTER);
vbox.getChildren().addAll(choiceBox, closeButton);
mainContainer.getChildren().add(vbox);
    closeButton.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Platform.exit();
primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT));
primaryStage.show();
private void enableDragging(final Node n) {
   final ObjectProperty<Point2D> mouseAnchor = new SimpleObjectProperty<>(null);
   n.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(new Point2D(event.getX(), event.getY()));
   n.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(null);
   n.addEventHandler(MouseEvent.MOUSE_DRAGGED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        Point2D anchor = mouseAnchor.get();
        Scene scene = n.getScene();
        Window window = null ;
        if (scene != null) {
          window = scene.getWindow();
        if (anchor != null && window != null) {
          double deltaX = event.getX()-anchor.getX();
          double deltaY = event.getY()-anchor.getY();
          window.setX(window.getX()+deltaX);
          window.setY(window.getY()+deltaY);
public static void main(String[] args) {
launch(args);

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create excise invoice with reference thorugh credit memo

Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memo

Hi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

How to create a table with events in smartforms?

How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)

Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements.

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to Create Business Partner with fix number in t-code :BP

Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
Vimol

Dear Shobhit,
How to put the thread as you mentioned.
Best regards,

How to create a subform with several initialized rows?

Similar Messages

Maybe you are looking for