How to create a system recovery USB drive?

My U845-S406 crashes every 15 minutes with a BSOD referencing iastor.sys.
Multiple diagnostics say it is all good.
Multiple virus softwares say it is clean.
It crashes even quicker in safe mode.
I have the latest Toshiba raid drivers, but updated to a more recent Intel set.  The error changes to iastora.sys, and goes back to iastor.sys when I switch back to the Toshiba drivers.
I booted holding down 0, and told it to restore; but it promptly crashes.
I made a W7 disk and tried to load it, but it promptly crashes.
As a last resort before throwing the computer out,  I want to create a system recovery USB drive, format the harddrive and try recovering from the USB; but I don't have the Toshiba Recovery Media Creator (or any Toshiba software at all...)  I downloaded a copy and ran it, but it says I don't have a HDD Recovery Area.
I know I have one because 1) I can access it by hold down 0, and 2)Partition Wizard showes it.
So, how can I create a system recover USB drive (or make Recovery Media Creator find the HDD recovery Area...)
Interestingly, the other day it spent 90 minutes installing a W7 update without a problem, but crashed immediately when done.  Maybe that means something.

Satellite U845-S406
Downloads here.
Please zip up a few of the corresponding *.dmp files from the C:\Windows\Minidump folder and attach them to your reply.
So the procedure in the section Creating recovery media (p. 53 in the User's Guide) doesn't work? Exactly where does it go wrong?
   Satellite/Satellite Pro U800W Series User’s Guide
-Jerry

Similar Messages

  • How do i transfer system recovery dvd to a usb

    Recently my ultrabook broken down and now the start up is in a never ending loop. I brought a system recovery media from hp, I cleary stated my ultrabook doesn't have dvd slot and he said that's fine once you get the dvd call us up and we will help you.
    I received my dvd today and when I called up there suggestion was and I quote "copy and paste all the data from the dvd to a usb, don't you know how to transfer files".
    I was like that won't work can you put me trough to someone that has better understanding and he goes it will cost you 30 somthing pounds.
    Can someone that understands my problem help me out?
    How can I transfer a system recovery dvd to create a bootable system recovery usb. I have another pc.

    Do you have only 1 dvd or several? I have seen others attempt this with a multiple dvd set and fail miserably. With 1 dvd you might have a chance. Create an ISO from the dvd with something like ImgBurn or other cd/dvd burning tool that can create an ISO file from a disc.
    Once you have the ISO file use Windows 7 USB/DVD Download Tool  to create a usb Recovery. It was created for Windows7 but works on other ISO files.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I never got a Mac OS X Lion Recovery USB Drive with my mbp

    i was reading online how to make a backup dvd for Lion and it ref that if you bought a new mpb with lion on it it came with a
    Mac OS X Lion Recovery USB Drive
    i went back and looked in the box ,and nothing
    my son just bought a 15 " mbp with moutin lion and there was no usb drive either
    how do i get this usb stick
    or did apple stop including it
    fred

    You do not need it It was a buy product for those unable to use the download from the web at a charge of $69
    see
    http://support.apple.com/kb/HT4718

  • PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

    Hi
    We ve go a  Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
    I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
    Thanks in advance
    Michael

    Hi Michael,
    Please refer here for the mapping API description:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
    You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
    You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
    Hope this helps,
    Greg

  • How do I set up my USB drive to work on airport

    How do I set up my USB drive to work on airport

    First be sure that your external USB HDD is formatted in either HFS+ or FAT32 as these will be the only two disk formats that the Extreme can share out to network clients.
    Once you verified the format, you just need to connect the HDD to the USB port on the Extreme. Finally you would use the AirPort Utility to enable the HDD for sharing.
    For AirPort Utility v6.x: Start the utility > Select your AirPort Extreme > Select Edit > Select the Disks tab. Verify that the utility correctly identifies your HDD. Then select (check) the "Enable file sharing" option, and then, select Update. After the base station updates, you should be able to "see" the shared HDD in Finder on your MacBook Pro.

  • How to Create a system in portal server

    I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
    Its pre-requisite is: A system – with an alias “JDBC” – defined on your portal server, and mapped to a database.
    Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
    Please help...

    Hi Makarand,
    Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
    To define a system:
    1. Create a new system; define all its properties
    2. Create a default system alias.
    3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
    4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
    VC retrieves the systems via the portal.
    You have to define the systems or use the defined systems in the portal you are connected.
    To define systems in the portal:
    System Administration => system configuration => system landscape:
    in the PCD: right click on a folder and Add new system.
    Then you have to define all the mandatory properties: Connector / Was / User management ...
    don’t forget to map your portal user with an R3/JDBC user...
    thank you very much.

  • Hi how to create logical systems.

    Hi,
       how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
    thanks
    dhanush.

    Hi,
    transaction:
    SALE -> Basic Settings -> Logical Systems -> Define Logical System
    No, you don't need to create Logical Systems to define RFC destinations.
    Regards,
    Jakub

  • How to Create a system in VC

    Hi,
    I wanted to know how to create a system in VC without integrating with NW04s?
    when i click on Find data i am not getting any list in systems.
    Please let me know how can i get it
    Edited by: Kavitha Bhat on Feb 11, 2008 12:04 PM
    Edited by: Kavitha Bhat on Feb 11, 2008 12:05 PM

    hi kavita,
    Go to Tools->Options
    1) Uncheck (Mask unsupported features).
    2) Try changing Runtime to Dynpro.
    Hope this will solve your Prob.
    Awards will be welcomed!!!!
    Regards
    parth
    Edited by: Parth on Feb 12, 2008 3:13 PM
    Please close the thread is your question been answered

  • How to create Source System in BI 7.0

    Hi Experts,
    How to create Source System in BI 7.0, please urgent
    Thanks

    Hi Mark,
    Did you see the help site below which is telling how to create a source system .If not please take a look at it.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
    Regards,
    ®

  • Dv6748us how to make a bios recovery usb

     how to make a  bios recovery usb?

    Hi!
    You can download new BIOS versions on the Toshiba website. Search for your model and select BIOS update
    http://eu.computers.toshiba-europe.com
    Download the right file and follow these instructions:
    Extract the zip file containing the BIOS upgrade to a temporary folder.
    Make sure that all open files are saved and all applications are closed.
    Execute the extracted *.exe file in the temporary folder. Follow the instructions on the screen.
    The BIOS update will be done automatically.
    After a few minutes the Notebook will restart automatically.
    Bye

  • How to create a system  parameter in Apex

    Hi friends,
    I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
    Regards,
    Pradeep

    bluerose wrote:
    I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
    using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
    What is "a System Parameter in Apex"? What "privileges" are used to create one?
    You'll find it easier to get help if you use terminology that is familiar to everyone...

  • How to create logical system

    Hi,
    How to create logical system.
    Please help me with the steps for logical system creation in R3 system.
    Thanks,
    Kelly

    Hi,
    First make your client modifiable, then follow the below procedure.
    Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
    For more information use below link.
    http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
    Thanks,
    Mano

  • How to create SAP System

    Hi all,
    Is this possible to assign the role, based on the organization structure?
    In which SAP system stores organization structure in it.
    How to create the SAP system to store my organization structure through EP.
    Helpful answers will appreciate.
    Thanks.
    Regards,
    Kathiresan R

    Hii
    How to create sap system:
    Steps:
    Go to System Administration
    2) Go to System Configuration
    3) Go to Portal Content (Right Side Panel), open that folder.
    4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
    5) That will display a new view on right side, now select "SAP system using dedicated application server" from
    the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
    For this exercise, we'll use the simplest type.
    6) Choose next
    7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
    about the system then give them in the "Description" field.
    8) Open the Newly Created System.
    9) Now when you want to create a New System, you have to fill four Properties they are:
    "Connector" - contains basic connectivty details
    "Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
    "Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
    "User Management".
    You also need at least one "System Alias" has to be defined from the Display drop down menu.
    Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
    10) Select "Connector" property, now fill the required fields such as:
    a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
    which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
    it will open a window which has the Application Server Name.
    b) Logical System Name - Give the logical name as defined in the backend system
    c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
    d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
    e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
    f) System Number - This is a two digit number that you can find in the SAP Logon Pad
    11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
    a) ITS Description à Give some Description
    b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
    port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
    c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
    Transaction Code "SICF", it opens a new window go to:
    default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
    that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
    the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
    d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
    visible when you opened "Test Service" window.
    12) Select "Web Application Server" property , now fill the required fields like
    a) Web AS Description -> Give some Description
    b) Web AS Host Name - same as ITS Host Name
    c) Web AS Path - usually /sap/bc/bsp/sapd)*
    Web AS Protocol - should be same as the ITS Protocol.
    13) Select "User Management" property, now fill the required fields like
    a) Authentication Ticket Type - Since we are not using SSO leave the field
    empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
    b) Logon Method - Select UIDPW.
    c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
    just have user rights then choose "user", better go for "admin/user".
    14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
    a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
    15) Now that System is created we have to create a iView which will display the given Transaction Code.
    16) Go To "Content Administration".
    17) Go To "Portal Content".
    18) Go to Portal Content (Right Side Panel), open that folder
    19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
    20) Select iView template, click next
    21) Select "SAP Transaction iView" from the list of templates available. Click next.
    22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
    23) Select "SAP GUI for HTML" radio button. Click next
    24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
    25) Now Preview the iView
    26) You will see a new Window where in SE12 Dictionary Display window is displayed.
    Thanks :
    Dont forget to give rewards if usefull.

  • How to create file system datagrid in flex web application

    how to create file system datagrid in flex web application

    Hi,
    Check this out:
    http://shigeru-nakagaki.com/flex_samples/FileReference/FileUploadExample2/FileUploadExampl e2.html
    Johnny
    Please rate answer.

  • How to creating TreeModel of the underlaying drives

    can anybody plz tell me how to creating TreeModel of the underlaying drives. so that we get the entire tree structure of the drives like window explorer.

    This thread will get you started.
    http://forum.java.sun.com/thread.jsp?forum=57&thread=457526

Maybe you are looking for