How to create a table in screen Painter ?
Hi can anyone give me the procedure to create a table in screen painter layout?
Thks
Hi this is my code but still error...please suggest me the corrections..
TABLES: ZONE.
DATA: ITAB LIKE ZONE OCCURS 0 WITH HEADER LINE,
WA LIKE ITAB.
MY TABLE CONTROL NAME IS ZMATERIAL
CONTROLS: ZMATERIAL TYPE TABLEVIEW USING SCREEN 100.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
loop at itab with control ZMATERIAL.
module select_data.
endloop.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
loop at itab.
endloop.
ENDMODULE. " USER_COMMAND_0100 INPUT
WAITING FOR YOUR REPLY
Similar Messages
-
How to create password field in screen painter
hi all,
i am designing login screen. in that i hv to create one input-output field as a password field. i.e when i enter the characters it will display in <b>*(star) format.</b>
also is there any way to do the same using <b>parameters</b> statement in report? give me the Way or coding.
thanks in advance,
regards,
Vinod.HI GOPI
I TRY TO ENCRYPT FORMULA IN PASSWORD PROTECT.BUT ITS NOT WORK .ITS SUCCESSFUL COMPILE & WHEN I PUT PASSWORD ITS SHOWING WHAT I GIVEN THERE. SO I THINK IN MY CODING PART THERE IS SOME ERROR.CAN U HELP ME PLEASE.
I BRIEFLY DESCRIBE.........
HERE FOR LOGIN PURPOSE I USE MODULE POOL PROGRAM & THERE I CREATE TWO FIELD ONE FOR (USER_NAME & PASSWORD).THERE SHOWING TWO ERROR (1ERROR ONE) EVEN IF YOU GIVE WRONG USER & PASSWORD THEN LOGIN SUCCESSFUL AND (2 SECOND ONE) IF YOU GIVE PASSWORD IN PASSWORD FIELD THAT LOOK LIKE (****) MEANS ENCRYPT.
I ALSO SEND MY CODING CAN YOU CHECK PLEASE.
REPORT ZLOGIN_PRO MESSAGE-ID ZBABUN.
TABLES: ZTABLE_LOGIN.
data: itab like table of ztable_login with header line,
OK TYPE SY-UCOMM.
CALL SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK.
WHEN 'LOGIN'.
SELECT * FROM ZTABLE_LOGIN INTO TABLE ITAB.
SELECT * FROM ZTABLE_LOGIN INTO TABLE ITAB WHERE PASSWORD = ZTABLE_LOGIN-PASSWORD.
SELECT USER_NAME FROM ZTABLE_LOGIN INTO ITAB-USER_NAME.
SELECT PASSWORD FROM ZTABLE_LOGIN INTO ITAB-PASSWORD.
LOOP AT ZTABLE_LOGIN.
if itab-user_name ca itab-password.
message i006.
ELSEIF SCREEN-GROUP1 = 'ZTABLE_LOGIN-PASSWORD'.
SCREEN-INVISIBLE = '1'.
MODIFY ZTABLE_LOGIN.
CONTINUE.
call transaction 'SBWP'.
else.
message e020.
CLEAR : ZTABLE_LOGIN-USER_NAME,ZTABLE_LOGIN-PASSWORD.
endif.
END LOOP.
WHEN 'LOGOUT'.
MESSAGE I007.
LEAVE PROGRAM.
WHEN 'CREATE'.
CALL TRANSACTION 'ZLOGIN_NEW_USER'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 IN
note: FIELD NAME OF USER_NAME = ZTABLE_LOGIN-USER_NAME
PASSWORD = ZTABLE_LOGIN-PASSWORD
PLEASE REPLAY ME.
.I AM WAIT FOR UR RESULT.
THANKS
LAXMIKANTA. -
GRCT HOW TO ADD Z TABLES IN REPORT PAINTER
Hi Gurus
Could you please send me information about how to activate z tables in report painter ? someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Morenohi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit -
How to design select-option through screen painter
I am new to screen painter. I want to make a screen having range of values high/low (just like select-option)......How can I do this using screen painter?
Hi!
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements
You can go with it also ....
Re: Select-options in dynpro
Regards.... -
How to run the query in screen painter
i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhavHope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana. -
How to create hashed table in runtime
hi experts
how to create hashed table in runtime, please give me the coading style.
please help me.
regards
subhasisHi,
Have alook at the code, and pls reward points.
Use Hashed Tables to Improve Performance :
report zuseofhashedtables.
Program: ZUseOfHashedTables **
Author: XXXXXXXXXXXXXXXXXX **
Versions: 4.6b - 4.6c **
Notes: **
this program shows how we can use hashed tables to improve **
the responce time. **
It shows, **
1. how to declare hashed tables **
2. a cache-like technique to improve access to master data **
3. how to collect data using hashed tables **
4. how to avoid deletions of unwanted data **
Results: the test we run read about 31000 rows from mkpf, 150000 **
rows from mseg, 500 rows from makt and 400 from lfa1. **
it filled ht_lst with 24500 rows and displayed them in **
alv grid format. **
It needed about 65 seconds to perform this task (with **
all the db buffers empty) **
The same program with standard tables needed 140 seconds **
to run with the same recordset and with buffers filled in **
Objetive: show a list that consists of all the material movements **
'101' - '901' for a certain range of dates in mkpf-budat. **
the columns to be displayed are: **
mkpf-budat, **
mkpf-mblnr, **
mseg-lifnr, **
lfa1-name1, **
mkpf-xblnr, **
mseg-zeile **
mseg-charg, **
mseg-matnr, **
makt-maktx, **
mseg-erfmg, **
mseg-erfme. **
or show a sumary list by matnr - menge **
You'll have to create a pf-status called vista - **
See form set_pf_status for details **
tables used -
tables: mkpf,
mseg,
lfa1,
makt.
global hashed tables used
data: begin of wa_mkpf, "header
mblnr like mkpf-mblnr,
mjahr like mkpf-mjahr,
budat like mkpf-budat,
xblnr like mkpf-xblnr,
end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
with unique key mblnr mjahr
with header line.
data: begin of wa_mseg, " line items
mblnr like mseg-mblnr,
mjahr like mseg-mjahr,
zeile like mseg-zeile,
bwart like mseg-bwart,
charg like mseg-charg,
matnr like mseg-matnr,
lifnr like mseg-lifnr,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
with unique key mblnr mjahr zeile
with header line.
cache structure for lfa1 records
data: begin of wa_lfa1,
lifnr like lfa1-lifnr,
name1 like lfa1-name1,
end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
with unique key lifnr
with header line.
cache structure for material related data
data: begin of wa_material,
matnr like makt-matnr,
maktx like makt-maktx,
end of wa_material.
data: ht_material like hashed table of wa_material
with unique key matnr
with header line.
result table
data: begin of wa_lst, "
budat like mkpf-budat,
mblnr like mseg-mblnr,
lifnr like mseg-lifnr,
name1 like lfa1-name1,
xblnr like mkpf-xblnr,
zeile like mseg-zeile,
charg like mseg-charg,
matnr like mseg-matnr,
maktx like makt-maktx,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
mjahr like mseg-mjahr,
end of wa_lst.
data: ht_lst like hashed table of wa_lst
with unique key mblnr mjahr zeile
with header line.
data: begin of wa_lst1, " sumary by material
matnr like mseg-matnr,
maktx like makt-maktx,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
end of wa_lst1.
data: ht_lst1 like hashed table of wa_lst1
with unique key matnr
with header line.
structures for alv grid display.
itabs
type-pools: slis.
data: it_lst like standard table of wa_lst with header line,
it_fieldcat_lst type slis_t_fieldcat_alv with header line,
it_sort_lst type slis_t_sortinfo_alv,
it_lst1 like standard table of wa_lst1 with header line,
it_fieldcat_lst1 type slis_t_fieldcat_alv with header line,
it_sort_lst1 type slis_t_sortinfo_alv.
structures
data: wa_sort type slis_sortinfo_alv,
ls_layout type slis_layout_alv.
global varialbes
data: g_lines type i.
data: g_repid like sy-repid,
ok_code like sy-ucomm.
selection-screen
"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
start-of-selection.
perform get_data.
perform show_data.
end-of-selection.
FORM get_data *
form get_data.
select mblnr mjahr budat xblnr
into table ht_mkpf
from mkpf
where budat in so_budat. " make use of std index.
have we retrieved data from mkpf?
describe table ht_mkpf lines g_lines.
if g_lines > 0.
if true then retrieve all related records from mseg.
Doing this way we make sure that the access is by primary key
of mseg.
The reason is that is faster to filter them in memory
than to allow the db server to do it.
select mblnr mjahr zeile bwart charg
matnr lifnr erfmg erfme
into table ht_mseg
from mseg
for all entries in ht_mkpf
where mblnr = ht_mkpf-mblnr
and mjahr = ht_mkpf-mjahr.
endif.
fill t_lst or t_lst1 according to user's choice.
if gp_bymat = ' '.
perform fill_ht_lst.
else.
perform fill_ht_lst1.
endif.
endform.
form fill_ht_lst.
refresh ht_lst.
Example: how to discard unwanted data in an efficient way.
loop at ht_mseg.
filter unwanted data
check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
check ht_mseg-matnr in so_matnr.
read header line.
read table ht_mkpf with table key mblnr = ht_mseg-mblnr
mjahr = ht_mseg-mjahr.
clear ht_lst.
* note : this may be faster if you specify field by field.
move-corresponding ht_mkpf to ht_lst.
move-corresponding ht_mseg to ht_lst.
perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
perform read_material using ht_mseg-matnr changing ht_lst-maktx.
insert table ht_lst.
endloop.
endform.
form fill_ht_lst1.
refresh ht_lst1.
Example: how to discard unwanted data in an efficient way.
hot to simulate a collect in a faster way
loop at ht_mseg.
filter unwanted data
check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
check ht_mseg-matnr in so_matnr.
* note : this may be faster if you specify field by field.
read table ht_lst1 with table key matnr = ht_mseg-matnr
transporting erfmg.
if sy-subrc <> 0. " if matnr doesn't exist in sumary table
" insert a new record
ht_lst1-matnr = ht_mseg-matnr.
perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
ht_lst1-erfmg = ht_mseg-erfmg.
ht_lst1-erfme = ht_mseg-erfme.
insert table ht_lst1.
else." a record was found.
" collect erfmg. To do so, fill in the unique key and add
" the numeric fields.
ht_lst1-matnr = ht_mseg-matnr.
add ht_mseg-erfmg to ht_lst1-erfmg.
modify table ht_lst1 transporting erfmg.
endif.
endloop.
endform.
implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
read table ht_lfa1 with table key lifnr = p_lifnr
transporting name1.
if sy-subrc <> 0.
clear ht_lfa1.
ht_lfa1-lifnr = p_lifnr.
select single name1
into ht_lfa1-name1
from lfa1
where lifnr = p_lifnr.
if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
insert table ht_lfa1.
endif.
p_name1 = ht_lfa1-name1.
endform.
implementation of cache for material data
form read_material using p_matnr changing p_maktx.
read table ht_material with table key matnr = p_matnr
transporting maktx.
if sy-subrc <> 0.
ht_material-matnr = p_matnr.
select single maktx into ht_material-maktx
from makt
where spras = sy-langu
and matnr = p_matnr.
if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
insert table ht_material.
endif.
p_maktx = ht_material-maktx.
endform.
form show_data.
if gp_bymat = ' '.
perform show_ht_lst.
else.
perform show_ht_lst1.
endif.
endform.
form show_ht_lst.
"needed because the FM can't use a hashed table.
it_lst[] = ht_lst[].
perform fill_layout using 'full display'
changing ls_layout.
perform fill_columns_lst.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
is_layout = ls_layout
it_fieldcat = it_fieldcat_lst[]
it_sort = it_sort_lst
tables
t_outtab = it_lst
exceptions
program_error = 1
others = 2.
endform.
form show_ht_lst1.
"needed because the FM can't use a hashed table.
it_lst1[] = ht_lst1[].
perform fill_layout using 'Sumary by matnr'
changing ls_layout.
perform fill_columns_lst1.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
is_layout = ls_layout
it_fieldcat = it_fieldcat_lst1[]
it_sort = it_sort_lst
tables
t_outtab = it_lst1
exceptions
program_error = 1
others = 2.
endform.
form fill_layout using p_window_titlebar
changing cs_layo type slis_layout_alv.
clear cs_layo.
cs_layo-window_titlebar = p_window_titlebar.
cs_layo-edit = 'X'.
cs_layo-edit_mode = space.
endform. " armar_layout_stock
form set_pf_status using rt_extab type slis_t_extab.
create a new status
and then select extras -> adjust template -> listviewer
set pf-status 'VISTA'.
endform. "set_pf_status
define add_lst.
clear it_fieldcat_lst.
it_fieldcat_lst-fieldname = &1.
it_fieldcat_lst-outputlen = &2.
it_fieldcat_lst-ddictxt = 'L'.
it_fieldcat_lst-seltext_l = &1.
it_fieldcat_lst-seltext_m = &1.
it_fieldcat_lst-seltext_m = &1.
if &1 = 'MATNR'.
it_fieldcat_lst-emphasize = 'C111'.
endif.
append it_fieldcat_lst.
end-of-definition.
define add_lst1.
clear it_fieldcat_lst.
it_fieldcat_lst1-fieldname = &1.
it_fieldcat_lst1-outputlen = &2.
it_fieldcat_lst1-ddictxt = 'L'.
it_fieldcat_lst1-seltext_l = &1.
it_fieldcat_lst1-seltext_m = &1.
it_fieldcat_lst1-seltext_m = &1.
append it_fieldcat_lst1.
end-of-definition.
form fill_columns_lst.
set columns for output.
refresh it_fieldcat_lst.
add_lst 'BUDAT' 10.
add_lst 'MBLNR' 10.
add_lst 'LIFNR' 10.
add_lst 'NAME1' 35.
add_lst 'XBLNR' 15.
add_lst 'ZEILE' 5.
add_lst 'CHARG' 10.
add_lst 'MATNR' 18.
add_lst 'MAKTX' 30.
add_lst 'ERFMG' 17.
add_lst 'ERFME' 5.
add_lst 'MJAHR' 4.
endform.
form fill_columns_lst1.
set columns for output.
refresh it_fieldcat_lst1.
add_lst1 'MATNR' 18.
add_lst1 'MAKTX' 30.
add_lst1 'ERFMG' 17.
add_lst1 'ERFME' 5..
endform.
Regards,
Ameet -
How to create value request for screen field text box tt1
How to create value request for screen field text box tt1
i have a text box name tt1,
i want f4 help for that .
remember i am asking for screen i.e done from screen layout not selectio-screen.
Thank you,
Regards,
Jagrut Bharatkumar Shukla,Hi,
Create one Search Help in the SE11 for the particular Field that u want to display. In the Screen(Transaction SE51),For that Text Box in the Attributes,in Dict Tab ->Search Help Field give that Search Help Name.
For Eg,
If u want Purchase Order Numbers in that F4 Help.Create one <b>Search Help</b> by giving Table Name as <b>EKKO</b> & <b>Search Help Parameter</b> as <b>EBELN</b> with Lpos & Rpos as 0 & 1.Save & Activate it.
Give this Search Help Name in Dict Tab ->Search Help Field of that Screen Attributes.
Regards,
Padmam. -
Creating data table in scren painter
Hi all
can i create a data table in screen painter?
appreciate the help
YoavHi!
Yes, you can create it. You can create data tables in the collections "tab", the same place where you can create choose from lists.
Hope it helps;
Jon Arranz -
Hi
this is fazil.
Please tell me any body how to create cluster table.
Thanks & Regards
Fazil
[email protected]Hi,
1. In the initial screen of the ABAP Dictionary select object type Table, enter a table name and choose Create.
The field maintenance screen for the table is displayed. Table type Transparent table is set as default.
2. Make the necessary entries in the Short description and Delivery class fields on the Attributes tab page. Then define the fields of the table.
Proceed as when creating a transparent table. Save your entries.
3. Choose Extras ® Change table category.
A dialog box appears in which you have to select the table type Pooled table or Cluster table.
4. Choose Select.
You return to the field maintenance screen for the table. Field Pool/cluster name is displayed on the Attributes tab page in addition to the standard fields.
5. Enter the name of the table pool or table cluster to which you want to assign the pooled table or cluster table in field Pool/cluster name
Note that the total key length of a pooled table may not exceed the key length of the associated table pool. The key of a cluster table must correspond to the key of the associated table cluster.
6. Proceed as when creating a transparent table (see Creating Tables). Remember that you cannot create indexes for pooled or cluster tables.
All the attributes of the technical settings can be maintained for pooled tables and cluster tables. Before you can access these attributes, however, you must convert the table to a transparent table.
Rgds,
P.Naganjana Reddy -
How to create the Table of Content (TOC) in WEB
Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AMHi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande -
How to create monthly table creation?
Hi Mates,
Unable to create table by month in analytic database but load the data to the previous table continuous as attached screenshot, Schema user has the creation privilege. We are using Webcenter interaction 10gR4.
How to create monthly table creation please?
Thanks,
KatherineHi Trevor,
Thanks for your help. We were able to create table and load data till Apr as attached.
However the analytic user privilege has been modified on Apr due to server operation.
Since then, there was a message saying there is no permission to create tables in the analytic log,
analytic user privilege has been granted after checked this message, As I suspected, the issue occurred after modifying analytic user privilege.
Currently, analytic users are granted with all privilege.
Any idea please?
Thanks,
Kathy -
How to create a table with events in smartforms?
How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements. -
How to Create a Table Component Dynamically based on the Need
Hello all,
I have a problem i need to create dynamically tables based on the no of records in the database. How can i create the table object using java code.
Please help.Winston's blog will probably be helpful:
How to create a table component dynamically:
http://blogs.sun.com/roller/page/winston?entry=creating_dynamic_table
Adding components to a dynamically created table
http://blogs.sun.com/roller/page/winston?entry=dynamic_button_table
Lark
Creator Team -
How to create a variant selection screen
Hi experts,
Can you tell me " How to create a variant selection screen ".
Please it's urgent.........
Thanks
BasuHi ,
Goto your selection screen
Make entries in the fileds od the selection screen
press save button, it will ask you for the mane of the Variant
Give the name of the Variant and save it
Variant is now created for the selection screen.
Reward if useful.
Regards,
Shilpi -
How to create a table in smart form.
Hi Folks,
I need to create a table in smart form with the following fields:-
vbrp-arktx,vbrp-fkimg,komv-kbetr,komv-kwert.
Please let me know how to create a table and how to name the columns,size,and the select query for the same.
All answers will be duly rewarded.
K.Kiran.Hi,
Following Links gives Details of Smartforms and how to create tables -
smartforms - very useful link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
FAQ
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Siddhi
Maybe you are looking for
-
How to refresh the current page when retrieving data from database
hi all in my application i want to navigate from different tables to different forms. The data in the table and in the forms is comming fromthe database. when i select a navigation link to database of a form it is connecting to database. so im manu
-
Finder folders stay open in list view
I am having a problem with the Finder. When looking at folders in list view, certain folders stay open every time I look at a certain directory. If I close the folders and re-open the surrounding folder, the triangles are back down again! These are f
-
A podcast that I subscribe to does not work anymore.
I have been listening to the podcast for a while now and as of 5 days ago it quit getting new episodes. When I try to manually update the podcast I get an error that states "The network connection was refused", but I can get on the internet just fine
-
Plugging in new iPod to filled iTunes?
i'm about to recieve my replacement ipod, and i'm hoping that all it will take to fill the new ipod back up with all my files is the simple connection to the computer/having iTunes running as normal. i want to make sure that this will not delete my i
-
Questions for current Apple TV users
Hello, I am interested in buying Apple TV I have following questions before I buy; 1 - Does ATV play avi files? 2 - Can I attach external hard drive using the usb port provided by ATV? Regards,