How to create a target group with all prospects?

Hi guys,
I am wondering how do I have to set up my data source when I would like to build a target group in my segment builder which includes all persons/contacts/organizations with the bp role prospect?
Which infoset do I need to choose in my data source? What do I need to fill under details?
Thanks a lot for your help.
Best regards,
Janine

Hi Janine,
What I could understand is that you require to create target group of all BPs having BP role as prospects.
To do so, you can create an infoset joning tables BUT000 and BUT100. The table BUT100 , has a field "BP Role"->select it, so that it is available when you are creating the attribute list using this infoset.
Create a data soucre for this infoset. Then when creating a attribute list, include this datasource and under this select the attribute "BP Role". Add filter to this attribute for prospects.
This filter can be used in segmentation builder in UI to create TG containing BPs having BP role as prospect.
Hopes this helps you.
Thanks,
Apoorv

Similar Messages

How to create full new user with all privileges

how to create full new user with all privileges?
and how to delete existing users?
Thanks in advance..

Common solution is probably to use sudo for privilege elevation, wiki should help

How to create/assigh Target Group while creating Marketing Plan in CRM 6.0

Hi all,
I am new to this field and would like to know that how can we assign the Target Group ( business Partners ) in the Campaign while creating a Marketing plan.
It will be really handy for me if I get the detail steps to execute.
Regards,
Zen

Hi,
perhaps this can help you:
http://help.sap.com/saphelp_crm60/helpdata/en/32/ad6f422f91c153e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/0abec5abb314dce10000000a155369/frameset.htm
This describes step by step what you have to do to create a marketing plan / campaign.
Regards,
Claudia

How to create multiple expanding outlines with all points equal distance to original shape?

Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
Any help would be greatly appreciated.

You need to use Offset path. Object>Path>Offset path. Use negative numbers to go inside of an existing shape, positive to go outside.
[ signature removed by forum host - advertising is not permitted ]

Target Group with Relationship...

Hi Experts,
We are facing difficulties creating a Target Group in CRM 5.0 (SP11). Below are the scenarios how our master data is organized.
1) Organizations with contact persons.(Company ABC having Contact Person = Rick)
2) Person with contact persons. (Dr. Larson having Contact Person = Mag)
3) Individual Persons (David B Allen) (with no contact person relationship)
Now we want to create a target group which should have contact persons of Organizations and Persons from scenario 1 & 2 and Individual Persons from scenario 3.
{i.e. Organization Contact Persons (Rick) + Person Contact Persons (Meg) + Individual Persons (David B Allen)}
If we use FM "CRM_MKTTG_PF_BP_TAB_TO_CP" while creating Data Source it filters down contact persons for Organizations only. Scenario 2 & 3 are not satisfied by this.
Do anyone knows how to create a target group like this ?
Regards,
Vikas

Hi Vikas,
I think you can go with another datasource using standard table BUT000 with BP partner category category as person as you need Persons with and without contact persons in relationship. Which means you need all BPs with partner category as person.
You can assign both datasouces to the single attribute list and create filters for the attributes partner category and the one which you created.
hope it helps.
Reward points if it helps
Regards,
Madhu

TCODE / Menupath for creating a target group

Hi All,
What is the transaction code/menupath to create a target group of business partners?
How to create a target group of the selected business partners using that tcode/menupath?
Please let me know.
Thanks in advance.
--R D

Hi RD,
Transaction code:CRMD_MKTSEG
Menu Path: SAP Menu->marketing>segementation->marketingsegments--->segment bulider
SAP Help link: <b>http://help.sap.com/saphelp_crm40sr1/helpdata/en/db/58963eac416f01e10000000a114084/frameset.htm</b>
Regards,
Arjun
<b>Don't Forget Rewards points if it helps</b>
Message was edited by:
Arjun Pawar

Creating the Target group

Hi ,
i would like to create the target group in segment builder.i got the list of business partners.how to create the target group using this list(excel sheet)
your help would be appreciated.
Thanks,
kenny

In CRM4, Segment Builder (CRMD_MKTSEG)
Create New Profile Set
Right click in main window area and select Create Target Group
Right click on New Target Group, select Properties
Click on the Load File and Create New Target Group tab
Follow directions there:
The file must contain a column with BP number or BP GUID.
The file must be an ASCII file (e.g. *.txt or *.csv).
The first line of the file must contain the column heading.
The columns must be separted with ; or ,
The new target group receives inactive status.
BP Column
Action          1 Add Business Partner to Target

Target group with Contact Person from Organisation

Dear experts,
we are currently on CRM 7.0 SP06.
In segment Builder (GUI) there is an option in context menu for target group which allows us to create a new target group with all the contact persons from an existing target group with organisations.
I know that we have to use the WEB UI. But there I could not find this functionality.
Although we can achieve the same building up our own infoset, I would like to know if this functionaltiy is actually missing, or not supported anymore.
Kind regards
Hannes

H isubash,
thanks for your answer. I know that this funciotnality is not available in WEB UI, although it is provided in conetxt menu in GUI.
Does anyone know if SAP simply not provided this functionality in current releases?
Kind regards
Hannes

Target group with customer and contact person

Hi experts,
I want to create a target group with customer data and the names of the main contact person to execute a campaign.
During execution I need the name of the contact person to personalize my forms, the campaign activity should be connected to the customer (and not the contact person).
Is there a functionality to solve my problem? (CRM 7.0)
Thanks in advance.
Werner

Hi Werner,.
I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
Create for example a Datasource with Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
Regards
Andreas
Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
Regards,
Andreas
Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

Creating Target group with Bi Query

Hi,
I am trying to create Target group with BI query, for that I created one query on real time info cube with 0BPARTNER, 0BP_GUID and selected all navigational attributes. In the query info object properties u2013 Advance setting I selecting u201C Values from Master Data Tableu201D & Access Type u201C Master Datau201D , In query Property u2013 selected u201C Allow External Access to Queryu201D
In CRM while creating Data source I can see the In objects selected in the query u2013 selected Business partner info object as 0BP_GUID ,In the attribute list I just selected one item Industry code against the above data source, while running the Segment Builder when I selected the industry code it gives me 0 business partner where as I am having 20 BP with that Industry code.
I appreciate your help ASAP.
Regards,
Rajiv Jain

Hi Rajiv
I have the same issue with my BI Query. Hope you have resolved by now, if you have please do let me know.
What we have done is, created a BI Query and used this query in in CRM datasource, then created some filters where i can see the objects in the query while creating filters in Attributes List. But when we use these filters to create Target group, its not resulting any results in the query, i mean not brining any values on segmentation area. This issue is only in Production as we have already tested in Test and passed without any problems. But in Production we have this issue, i m not sure why this is happening, i spoke to BW team regarding this and they are not sure eitherl. If you know could you please let me know
Thank you in advance
Regards
shankar

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

HT2486 how do I copy an existing Group in Contacts to create a new group with the same contacts in it?

How do I copy an existing group in Contacts to create a new group with the same contacts in it?

Hi there,
Unfortunately the use case you describe hasn't been implemented in Firefox. It's not possible to move a tab group out to its own window at this point. Generally the tab groups feature hasn't been worked on much recently, not sure why.
As to TabMixPlus, that's a third-party add-on which Mozilla doesn't directly support. You can find support links from the add-on page: https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/
Hope this helps.
Cheers,
David

How to create a target group with all prospects?

Similar Messages

Maybe you are looking for