How to create a test scenario for Extended receiver agreement

HI, experts,
I tried to create a test scenario in PI7.1 / Intergration Builder, I already defined 3Operation mapping and 3Message mapping in Enterprise Builder and test good.
1 Operation mapping is reading input, and output in "ReveiverDetermine" structure.
other 2 mappings are real mapping program.
My question is how to create test scenario for it? I know I should create a "Receiver Determine" with "Extended" option, however can anybody point out a good guide with details?
thanks!

Hi,
>>Hence I created 2 MM/OM and one OM/MM (OM3) which uses ReceiverDetermine structure as the target.
You need to create only one OM (add one source interface and two target interface in this)  and in that use one MM (add source MT and add the 2 receiver MT in the signature tab of the MM )
>>One bussiness component
One BC for Source and One for target
>>One Receiver Determine (set extended option and select the OM 3 ?)
Yes
>>One sender aggrement
Yes
>>Two or Tree Receiver aggrement
Two Receiver Agreement
Also check this wiki page for step-by-step guiide
https://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards
Suraj

Similar Messages

  • How to create the Data Type for the receiver end?

    Hello Expertise
    I wanted to Create a Data type for  Receiver end in PI.
    Sender end is ECC.
    Receiver end is SRM
    Here's the Data type for Sender end  as
    Can anyone help to create the Data type for Receiver end i.e SRM.
    Thanks in advance.
    Regards
    karan

    Hi Karan,
    Please don't call Sir, we are just trying to help each other.
    Please go through below scenario's and check your configuration.
    ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
    http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
    regards,
    Harish

  • How  to create and test HTTP connection for proxy

    HI
    Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
    How i will get sure that connection is working properly?
    Thanks
    Debraj

    Hi Debraj,
       You should be able to do that in SM59 of the XI Box.
    Create the connection under "HTTP Connections to R/3 System".
    Provide the Target Host IP Address.Service Number and Path Prefix.
    Select the logon procedure as SAP Standard.
    SSL Inactive.
    Provide Logon details.
    Regards,
    Ravi

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

  • How to create an External Alias for a Portal URL ?

    Hi Gurus,
    Can anybody tell me how to create an external alias for a portal link(URL). Actually, my problem is i want to send this Portal URL(link) thru' a SendMail step to the user so that when he clicks on it, it will take him to his UWL(Ofcourse after signing-in). As this URL length is > 80 char(101 char), i am not getting the full lenght URL in my Outlook mail. THough we are on ECC 6.0,Basis Rel 7.0, as per the OSS note 559234, we should have this length extended to 132 bytes. But, for some reason, its not happening. And,in the same OSS note, it was mentioned that we can use external aliases to achieve this(shortening the URL length).
    Can anybody tell me how to achieve this, either thru' increasing the URL length or thru' ext. aliases.
    Please reply asap.
    Thanks in advance
    venu

    Not an issue as of now. I'll open up again if needed

  • How to Create and Test a Zone of Type F1-APP-URL

    Hi,
    I would like to how to create and test a Zone of Type F1-APP-URL?
    What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
    Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

    Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • How to get the spool id or how to create a spool id for the report .

    hi,
    how to get the spool id or how to create a spool id for the report .
    this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
    my requirement is to download a pdf file from the alv grid list.

    Hi Raghu,
    Execute this program.
    REPORT  ZTEST_3318                              .
    tables: usr01.
    perform send_report_to_spool.
    *&      Form  send_report_to_spool
          text
    form send_report_to_spool.
      data: loc_dest like pri_params-pdest,
            wf_listname type char12,
            wf_listtext like PRI_PARAMS-PRTXT,
            wf_copies type i,
            wf_days type i,
            wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
            wf_valid type c.
      clear : wf_listname , loc_dest , wf_listtext .
      move: 'AP interface' to   wf_listname .
      move: 'AP interface' to   wf_listtext .
    select single spld into usr01-spld from usr01 where bname eq sy-uname .
      if sy-subrc eq 0 .
        move: usr01-spld to loc_dest .
      endif .
      call function 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = loc_dest
          copies         = 1
          list_name      = wf_listname
          list_text      = wf_listtext
          immediately    = ' '
          release        = ' '
          new_list_id    = 'X'
          expiration     = 1
          line_size      = 200
          line_count     = 65
          layout         = 'X_65_200'
          sap_cover_page = 'X'
          receiver       = 'SAP*'
          department     = ''
          no_dialog      = 'X'
        IMPORTING
          out_parameters = wf_params
          valid          = wf_valid.
      if wf_valid <> space.
        new-page print on parameters wf_params no dialog.
        perform write_summary .
        new-page print off.
      endif .
    endform.                    "send_report_to_spool
    *&      Form  write_summary
          text
    -->  p1        text
    <--  p2        text
    FORM write_summary .
    data: begin of itab occurs 0,
          matnr type matnr,
          end of itab.
    select matnr
           from mara
           into table itab
           up to 10 rows.
    loop at itab.
    write: / itab-matnr.
    endloop.
    ENDFORM.                    " write_summary
    This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
    After that use that spool for your purpose.
    If Useful award point

  • How to Create Track in NWDI for CRM ISA 5.0

    hi
    can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.).
    As far as i know SAP does not deliver sources for SCs SAP-JEE,SAP_BUILDT and SAP_JTECHS so we cant have them as "Developed Software Components" when we eg:want to modify the SCs SAP-SHRAPP.SCA or CUSTCRMPRJ.SCA.
    here what i want to know is depending on which SCs we actually want to modify, based on that our track want to be Configured differently.
    My question is how to configure the Track in NWDI for this kind of scenario.
    If the source is not given and only required software components are given then how to create track in NWDI. for example in CRM ISA 5.0
    Regards,
    Chandra.

    SAP documentation is there in service market place for NWDI setup under netweaver. If you dont find document post your email id, I will send you the document.
    regards,
    Laxman

  • How to create a credit memo for an existing sales order !

    Can any body help for how to create a credit memo for an existing sales order !

    Hi,
    It is actually possible to create credit memos from sales orders though it is not followed in most of the scenarios.
    We have got a scenario in commodity trading that a sales order will be created with positive value. Once the swaps are settled by the portfolio mngt team, if we have to give some money to the payer, then a credit memo will be greated (as in their case all invoices will have only +ve value as net value) with reference to the sales order. In the copy control, the main field to be taken care of at itme level is the PRICING TYPE for which a value of F has to be maintained. This will convert the sign of the values and fix them. Now a credit memo will be created for teh saels order.
    In this case, the document cateogyr of sales order will be C in VBAK, but it will be K in VBFA table which is the table for document flow.
    Hope this answers your question. You can reward if it helps you.
    Otherwise the normal process is
    SALES ORDER---INVOICECREDIT MEMO REQUEST----CREDIT MEMO

  • How to create a RFC destination for extracting data to HANA

    Hello All,
    Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
    I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

    Hi Venkatesh,
    In SM59 t.code we create RFC destinations.
    Go thru the video link for creating RFC destinations step by step
    How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

  • How to create a daily report for sales order

    hi
    how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

    Hi
    You have to use the sales order tables VBAK,VBAP and VBEP
    So keep date field on selection screen
    and treat this date as Order creation data audat field in VBAK.
    based on this fetch the data from VBAK and VBAP  with the following fields like
    VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS  etc and display in the report
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to create an address code for PO delivery address?

    Hi Guys,
    How to create an address code for the delivery address in the purchase order? Please explain me with details.....
    Thanks
    Raja

    delivery adress records can be created with transaction MEAN.
    the number is purely internal.
    In ME21N you can then search by name (you will certainly not know the number)

  • How to create different log files for each of web applications deployed in OC4J

    Hi All,
    I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
    1. how to create different log files for each of my deployed web applications ?
    2. what are the advantages in running multiple instances of oc4j and in what case we should run
    multiple instances of OC4J ?
    3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
    Thanks and Regards,
    Kumar.

    Hi Avi,
    First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
    I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
    I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
    Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
    Thanks and Regards,
    Ravi.

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

Maybe you are looking for