How to create a text field (multi-line) that starts on one pages but finishes on another?

Hi,
I would like to create a multiline text field that the field starts on one pages but finishes on another?
Here is an example of what I want. The text starts in the top of the box (1st box) and would continue in the bottom box (2nd box).
I have Adobe Acrobat X (version 10.1.1) on Windows 7. I know I could use Live Cycle to create an expandable but I need to import this form to Adobe Form Central after therefore Live Cycle isn't an option.
Thanks in advance for everyone's help!

Hi,
I found a possible solution to my question which is working OK with form central (http://forums.adobe.com/thread/303650)
Here are the limitation of that option (that I found out so far):
it cuts in the middle of the word you are writting when switching to the next box
you can't copy and paste a long text
if you remove text from the first box i won't move text from the second box back up
you can't go back with your cursor from the second box to the first (e.g. to edit you text)
Any other ideas of how I can get that done?
Thank you!

Similar Messages

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

How to create-Form text field to simultaneously preview the text over an image

I am trying to make a web page similar to the link below…where when a customer types in the form text field, and simultaneously, the text will preview in another area of the webpage over and image. See example when you create a label @ www.customwinesource.com custom labels…http://www.customwinesource.com/index.cfm?method=storepairing.listPairing&wineryid=auto
Any help would be much appreciated

I wasn't able to (easily) find anything in the way of a textfield to type something into that you describe, but you can assign code for input textfields to detect when something changes in them and take action from that event. How you do it depends on which version of actionscript you are using.

How to create a text field in Oracle apps11i Forms.

Hi Guru's
I have the following requirement to modifiy the PO Receiving screen in Oracle apps 11i,
1. An additional field (No. of Items to recive) need to be created to the “PO Receiving” screen of Oracle apps 11i .
2. Once user mentioned the po num, PO Line Num and quantity in the newly created text field and when he/she click on the Find Button , the receipt lines (lines should be as many as the quantity mentioned in the newly created field) should be create in the receipt screen
Please let me know if this can be achived through Form Personalization or is there any other approach?
Thanks,
Mustaq.

Mustaq,
First and foremost; never under any circumstance should you modify an Oracle EBS form. This is a violation of the EBS License Agreement. Oracle has provided methods of capturing data that is not part of a form. I suggest you dig through the Oracle Applications Documentation and read up on using Descriptive Flex-Fields (DFF).
Also, Francois is right. For this type of question, the General EBS Discussion forum is the best place to post this question.
Craig...

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

How to create a gradient field in CS5 that doesn't striate when printed?

Can someone explain how to create a large gradient field in CS5 that won't striate when printed? I created a poster, 18" x 24" in which the bottom third gradates from olive to black. When it prints there are thick paralell bands which are undesirable. The tips I found online go back to 2009 which don't apply to CS5. The directions in the CS5 manual are confusing to me. Is there a simple way to do this?

Is your monitor well calibrated?
Did you print it locally on your own printer before sending it out?
After you've exhausted everything else, you might consider creating a small test file with the offending gradient, and physically carry it to one of the printing locations, and speak to a technician there. Honestly, it sounds like a profile mismatch, but if this has happened at multiple Kinkos locations, then I agree, it would seem the problem is most likely in the file.
Have you looked at individual channels? (R,G,B)
One other idea: you say it's olive to black ... you could try an olive gradient from 100% opacity to 0% opacity, placed over a solid black layer, (or alteratively, a similar black gradient over solid olive) and see if that improves the output. Beware, some printers are really bad at 0%-5% values. If the gradient is going from 100% of one color to 0%, this might be contributing to the problem. Try going from 100% to 5% if this is the case.
One last thing: can you post a portion of the offending area of the image here?

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to create a text field box that saves and reveals content within PDF?

I cannot seem to find a way (at least within Indesign) to allow users to enter content, and then to later have that content revealed within the PDF at a later point.
Example:
User enters name: "Jon"
PDF: "Welcome Jon!"

You can't do it with InDesign but you might be able to do it with some
scripting in Acrobat Pro. You might want to visit the Acrobat forum and
ask there.

To create a text field in IDOC

Hi,
My requirement is The newly configured Text field to contain the NxTrend Po number needs to be available in EDI 850 IDoc for XI maps the value to the field.This field should be available in the IDoc so that the value of end customeru2019s PO can be mapped there.
The changes are only required for NxTrend and do not need to be made for regular EDI customers. The message ID for NxTrend is NXT_ORDERS.
I am new to IDOCS.Can anyone tell me how to create the text field in the IDOC?

Hi,
To add a field in the IDOC you need to go for EXTENSION OF IDOC.
Please check this link
http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f4943d711d1893e0000e8323c4f/content.htm
Re: Extension of Idoc segment
IDOC extensions
Best regards,
raam

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

How do I create a text field the scrolls mutliple pages in Adobe Pro XI

How do I create a text field that when filled in the alloted space on one page it opens a second page?

Search the forum for "auto tab"...

Does anyone know how I can create a text field in a pdf document that will multiply a total in another box?

does anyone know how I can create a text field in a pdf document that will multiply a total in another box? I’m making an interactive pdf for an order form (attached), and I need to find a way for the “total quantity” number to multiply by 9 and total in the “Amount Due” box.

Hey Gary,
Have a look at this post: Re: horizontal scrolling similar to excel
Andy's reply will show you how to make a table scroll horizontally, but it will be tough to accomplish it in some sort of easily replicable way. I am working on a JQuery extension that will help accomplish this, but I have had my time invested in another project at the moment.
Good Luck,
Tyson

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

Create a text field in transaction code VF11

Hi,
How to configure a text field in transaction code VF11.Please help me on this.
Presently we are just cancelling the invoices through VF11. but no inputing the reason for cancellation.
We need to have a mandatory field, were in we need to input the reason for cancellation of that invoices.
Thanks & Regards,
vcsreddy.

Dear
Create One text type for Billing document header and Assign the Biling Type S1
and when your doing Vf11Transcation select GOTO Billing Document Over view and select the line item
go to text there your text type will determine.
Do this I hope your requriment full fill
Regards
Supriya

How can I expand text fields in my PDF file which I built in Forms Central?

I'm working in Windows 7 and just created my first form in Forms Central. I have many text fields that I intended for the end user to be able to type as much information in them as necessary. I selected the "multiple lines of text" setting for each of these fields. I was told by someone at Adobe a while back when I was trying to decide on learning LiveCycle Designer or using the much more user-friendly Forms Central that the form fields would not automatically expand in the PDF form, but that I would be able to click or drag on the fields manually to expand them so that, ultimately, they could be printed with all the comments, for however many pages it would take. I've exported my Forms Central form to a PDF file. However, when I type multiple lines of text in the form fields I set up to be "unlimited," I cannot get the form fields to expand. What have I done wrong? Help, please!

We are dealing with a similar situation. We have downloaded LiveCycle and created the form, but as we knew would happen, the changes that come for the content of the form are causing us to max our trial version, and as soon as the form needs a change outside of the trial time period, we are faced with the next dilemma, as Adobe doesn't offer to purchase a single license at a reasonable rate. The only reason we wanted LiveCycle was for the dynamic field feature. I plead with you to consider offering that feature in Forms Central. The other issue that we are having is that our users sometimes need to paste a table into the expandable text field. Is that even possible in Live Cycle? We don't at this point need the web-based functioning that Live Cycle offers. Thank you.

How to create a text field (multi-line) that starts on one pages but finishes on another?

Similar Messages

Maybe you are looking for