How to create a transition between tracks

I have a 3 minute sequence that I would like to loop in DVDSP. I have duplicated the sequence into
two tracks and set end jumps to ping pong between track 1 & 2. So far so good. How can I create
a transition such as Dissolve to transition between track 1 and 2. I have set transitions but can only
simulate a cut when looping between the tracks. Help appreciated!
DVDSP 4.2.1

I think DVDSP doesn't offer anything like a dissolve, so here's a suggested hack:
In your FCP timeline, duplicate the segment so that you have three copies,
one after the other. We'll call the three copies A, B, and C. Put the transition
between A and B, and between B and C. Make sure that A begins appropriately
(maybe a fade up from black), and that C ends appropriately (maybe a fade to black).
Now export and compress each segment and include in your DVDSP project.
Create a track in DVDSP, and decide the maximum length of time the track will run
(this is a guesstimate). On the track's timeline, put the segments in this order:
A B B B B B B B C, with the number of repeats determining the maximum length.
I realize it's a hack, but it should work. When exporting from FCP, be careful
to get the in and out points correct.

Similar Messages

  • How do I define gap between tracks in playlists?

    how do I define gap between tracks in a playlist in iTunes? (So that the gaps will be a part of the playlist after syncronizing to an iPhone.)
    This is for tracks imported from LogicPro, not ripped from a CD.
    Thanks for answer

    Since iTunes has no such feature, the way to do it is to create short tracks of silence.  Add them to your iTunes library, and insert them as separators between other tracks in the playlist.  You can use the same track multiple times in the same regular playlist.
    I have not used Logic Pro, but I am fairly sure it can be used to create a short track of silence.

  • How to create a transition where a certain area stays the same?

    For example, let's say I have 2 pictures of me. They're different, but my face expression is the same in both. I want to create a transition between them (cross dissolve or something) so that my face doesn't get blurred during that transition. Like, it's a different size than in the other photo, so I want it to kind of morph into the second one, without a sudden change in position.

    Kraut Cutter wrote:
    I Build an Animation in Motion which i will use in Future Sessions As a transition. I Know how to Export a Template, but that don't fits my Needs.
    My Animation is a fullsize hd Movie Zooms out half a Size, goes Left, from the right Comes the Next Clip After a Second it grows to the Middle of screen in full Size again.
    That Works perfect in Motion.
    How can i bring it into fcp ?
    So how's this going for you?
    bogiesan

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create a link between 2 cells in different spreadsheets?

    when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

    In the cell where you want the duplicate data to appear from another sheet/table do the following:
    type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
    it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

  • How to create fxplug transition for xcode and quatrz composer

    how to create fxplug transition for xcode and quatrz composer?

    Hi Mohan,
    You have to create and configure your system in the system administration tab in the portal.
    Usually, it looks like the following:
    System from template: JDBC System
    Connector properties
       Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
       Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
    User management properties
       User mapping type: admin, user
    Set the system with an alias.
    Go to user administration tab and map the user with VCRole to the configured system
    (the default for MSSQL is usauly user: sa and pw: admin)
    Save your changes and logon to VC with this user.
    The alias name should appear in your list of systems.
    Hope I helped,
    Shay

  • How to create database link between oracle9i database and oracle10g

    How to create database link between oracle9i database and oracle10g
    oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
    oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
    Please help me on this

    For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
    Connections between 10.2 and 9.0.1 was never been supported.
    Cheers !!!!
    Bhupinder

  • How do I make transitions between clips smooth?

    how do I make transitions between clips smooth?  Right now, when I play my video in imovie, the clips freeze or jump between clips. 

    Have you tried sharing the final movie using the Share menu, or, alternatively use FILE/FINALIZE PROJECT?
    The final product shouldn't have any lag. iMovie itself should not have any lag, but could depending on your Memory and hard disk configuration.

  • How to create a connection between SAP BPC 10.0 to SAP BOBJ

    Hi friends,
    My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
    1.Is there any guide to create such connection ?
    2.how the data feed to BOBJ reports?
    please help me ASAP.
    Regards,
    Saida Reddy G

    Hi,
    Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
    How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
    Hope it helps...
    regards,
    Raju

  • How to create an relation between two block

    Oracle forms 6i
    Hai All
    I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
    I have two block named Leader and members.
    Four fields in leader block namely name , codeno, deptcode, unitid.
    When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
    enter i gives the codeno, deptcode and unitid of the leader_name.
    so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
    So pls tell me the steps how to create the relation between these two blocks.
    when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
    I also need to gives the members in that deptcode..
    Thanks In Advance
    Srikkanth.M

    If it is possible to create relationship with one table No.
    Or
    I have created a pre-Query in the detali block and my code is
    set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
    If numeric
    set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
    Otherwire
    set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad

  • How to create radio button between two slection screen

    hello all.
    could you please guide me how to create radio button between two SELECTION-SCREEN  in screen painter.
    Thank you,
    srinivas

    hi
    SEE THIS CODE
    REPORT  ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
    ******DATA DECLARATIONS**********
    DATA : BEGIN OF IT_PLANT OCCURS 0,
            MATNR LIKE MARA-MATNR,
            WERKS LIKE MARC-WERKS,
            PSTAT LIKE MARC-PSTAT,
            EKGRP LIKE MARC-EKGRP,
           END OF IT_PLANT.
    DATA : BEGIN OF IT_PONO OCCURS 0,
            EBELN LIKE EKKO-EBELN,
            EBELP LIKE EKPO-EBELP,
            MATNR LIKE EKPO-MATNR,
            WERKS LIKE EKPO-WERKS,
            LGORT LIKE EKPO-LGORT,
           END OF IT_PONO.
    TABLES EKKO.
    ********END OF DATA DECLARATIONS*********
    ********SELECTION SCREEN DESIGN ***********
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
    SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R4 RADIOBUTTON GROUP G2.
    SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    ******END OF SELECTION SCREEN DESIGN****************
    <b>rEWARD IF USEFULL</b>

  • How to create a relationship between 2 GOS objects

    Hi all,
    I have a small problem how to create a link between 2 GOS (businnes objects) .
    I have 2 different business objects ( Z* type, for example class Z1 and Z2) defined using SWO1, and I want to create link between instances of 2 GOS objects.
    I try to use FM 'BINARY_RELATION_CREATE' ,
    fill parameters OBJ_ROLEA , OBJ_ROLEB ,
    but I know how to fill parameter RELATIONTYPE.
    All the time I got a message RL 301 (Role type '&1' is not assigned object type '&2').
    Should I make some customization (and how ) for roles of object Z1 and Z2 ?
    Or should I use any general relationtype ?
    Can somebody helo me to explain, how to make customization , or any link, example ?
    Thanks in advance
    Milan Dobias

    Thanks for Your answer, but main problem is what relation type use to create link between 2 common objects.
    Your solution (use class CL_BINARY_RELATION) returns the same error message, because this class is used in FM BINARY_RELATION_CREATE.
    In the end I found that solution is to use as relationtype (ORBRELTYP-RELTYPE  = 'ASGN').
        CALL FUNCTION 'BINARY_RELATION_CREATE'
          EXPORTING
            obj_rolea      = obj_a
            obj_roleb      = obj_b
            relationtype   = 'ASGN'
          EXCEPTIONS
            no_model       = 1
            internal_error = 2
            unknown        = 3
            OTHERS         = 4.
    It seems to work and on both objects (A and B) I can see link (relation).
    Best regards,
    MD

  • Is there a way to make the transition between tracks seamless on iTune purchases of through-composed music? Please advise.  Thanks

    Is there a way to make the transition between tracks seamless on iTune purchases of through-composed music? Please advise.  Thanks

    Thanks for answering Chris. You clearly have much more experience than I do in these matters, and I don't mean to challenge... but that's not been my experience. If I choose shuffle for a list of all songs and listen continuously for many hours, I really do (and will) hear repeats.

  • How to create shared folder between mac and windows

    how to create shared folder between mac and windows

    Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

Maybe you are looking for