How to create a trigger using 9211 modules with cDAQ-9174?

I am trying to create posttriggered acquisition with an analog trigger using 9211 modules that are reading 4 thermocouples. I would like the data aquisition to start once a temperature of 90 degrees C is reached. I am not sure what I should put for the source of my trigger in my VI. Are these modules capable of using triggers, and if so, how do I go about creating one? Attached is the VI, thanks.
Attachments:
Thermocouple.vi ‏151 KB

The 9211 doesn't have any analog triggering capabilities. You'll have to implement the trigger in SW (like this example).
Best Regards,
John Passiak

Similar Messages

Generic Extractor using Function module with Complex Interface

Hi,
Has anyone created Generic extractor using Function module with Complex Interface?
What is the difference between Complex and Simple interface in Function module?
Pls explain.
Thanks,
Gopal

Hi,
Go through this link.....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
GTR

How to create Handling Unit using Process Order no. & Packing Instruction

Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh

Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh

How to Create a Remotely Enabled Function Module

Hi All,
How to Create a Remotely Enabled Function Module.
I Want to Create a FM Using Sample Data , This for Practice
What Fields can i give in the Import and Export Parameters.
Please Give me one Example
Can Any one Give me the Steps to do this.
Regards
Vamsi

Hi Vamsi,
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
 p_num1 = 10
 p_num2 = 15
importing
 p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
Regards,
Sukhee

How to create field catalog using field-symbols in normal alv report?

hi all,
how to create field catalog using field-symbols in normal alv report? i.e, using function modules...reuse_alv_list_display/grid_display?
regards,
jack

HI
LIKE THIS
TYPE-POOLS : slis.
DATA : t_fieldcat TYPE slis_t_fieldcat_alv,
 st_fieldcat TYPE slis_fieldcat_alv.
st_fieldcat-fieldname = 'STATUS'.
st_fieldcat-seltext_l = 'STATUS INDICATOR'.
st_fieldcat-outputlen = 17.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Sales Document No.'.
st_fieldcat-outputlen = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUDAT'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Document Date'.
st_fieldcat-outputlen = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'VBTYP'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Document Type'.
st_fieldcat-outputlen = 4.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUART'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Category'.
st_fieldcat-outputlen = 1.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUGRU'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Reason'.
st_fieldcat-outputlen = 3.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'NETWR'.
st_fieldcat-do_sum = 'X'.
st_fieldcat-seltext_l = 'Net Amount'.
st_fieldcat-outputlen = 15.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Unit'.
st_fieldcat-outputlen = 5.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
*sortinfo
st_sort-fieldname = 'AUART'.
st_sort-up = 'X'.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBTYP'.
st_sort-up = 'X'.
st_sort-subtot = ' '.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'WAERK'.
st_sort-up = 'X'.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBELN'.
st_sort-up = ' '.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = it_eventcat
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF grid = 'X'.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 i_callback_program = g_program
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = ' '
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT =
 it_fieldcat = t_fieldcat
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 it_sort = t_sort
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = it_final
 EXCEPTIONS
 program_error = 1
 OTHERS = 2
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
REWARD IF USEFULL

How to create a complain using FM "CRM_ORDER_MAINTAIN"

Hi experts,
How to create a complain using FM "CRM_ORDER_MAINTAIN" and to capture the complain id which is auto generated.
Please help me finding solution
Thanks
Aisurya

hi
try to create complaint manually and before save it go into debugging mode (\h in command window) and press save. debugging window opens and put a break point at function module CRM_ORDER_MAINTAIN. this will help you to identify the information that has to be sent to the FM to create a complaint. write code according to the information you found and after that call , CRM_ORDER_SAVE function module to save the transaction. in this fm ET_SAVED_OBJECTS you can find the newly created transaction id.
for new complaints you can use GUID_CREATE FM to create new guid and you can give this value to FM as you find and also to the CRM_ORDER_SAVE fm. call BAPI_TRANSACTION_COMMIT finally. hope it helps you.

How to create purchase order using VA01 for BAPI?

how to create purchase order using VA01 for BAPI?

Hi Arun,
Please check this link
Example Program for BAPI_PO_CREATE1
Re: BAPI_PO_CREATE1
Questions in BAPI_PO_CREATE1
Problem with BAPI_PO_CREATE1
*& Report BAPI_PO_CREATE *
REPORT bapi_po_create.
Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',.,..',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
Best regards,
raam

How to Create Shared Storage using VM-Server 2.1 Red Hat Enterprise Linux 5

Thanks in advance.
Describe in sequence how to create shared storage for a two guest/node Red Hat Linux Enterprise using Oracle 2.1 VM Server on Red Hat Linux Enterprise 5 using command line or appropriate interface.
How to create Shared Storage using Oracle 2.1 VM Server?
How to configure Network for two node cluster (oracle clusterware)?

Hi Suresh Kumar,
Oracle Application Server 10g Release 2, Patch Set 3 (10.1.2.3) is required to be fully certified on OEL 5.x or RHEL 5.x.
Oracle Application Server 10g Release 2 10.1.2.0.0 or 10.1.2.0.1 versions are not supported with Oracle Enterprise Linux (OEL) 5.0 or Red Hat Enterprise Linux (RHEL) 5.0. It is recommended that version 10.1.2.0.2 be obtained and installed.
Which implies Oracle AS 10.1.2.x is some what certified on RHEL 5.x
I think it would be better if you get in touch with Oracle Support regarding this .
Sorry , I am not aware of any document on migration from Sun Solaris to RH Linux 5.2 .
Thanks,
Sutirtha

How to create an array using reflection.

How to create an array using reflection.
I want to achive something like this,Object o;
o = (Object)(new TestClass[10]);but by use of reflection.
To create a single object is simple:Object o;
o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
Anybody knows?":-)
Ragnvald Barth
Software enigneer

Found it!
the java.lang.reflect.Array class solves it!
Yes !!!

How to create a table using Text Layout Framework?

How to create a table using Text Layout Framework? I meen real tables - like in HTML.

Cell as indipendant TLF should work, I have created my table using same approach and works fine for me ... this is where it is
http://apps.live-documents.com/docs/openWebDoc.do?docId=1480607
Regards
Raf

How to create web site using STRUTS frame work

Hi,
I know how to create web pages using JSP & Servlets.But now i have to create Matrimonial web site using STRUTS frame work.Plz any one guide for me...
Thank U....

Struts is not to be confused with JSF.
Start at their own homepage over there at apache.org.
Good luck.

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to create CRUD application using bapi in webdynpro java

Hi All,
I have implemented the CRUD application using bapi Now i want to create, retrieve , update and delete the existing table by click on Insert, delete, retrieve ,and update button dynamically. i get null values from database, Please let me know the logic and procedure for how to create CRUD application using bapi Please any one help me..
Thanks in advance

Hi,
Hey tell me one thing your BAPI having CURD methods. See you are getting data from BAPI and pull the data in Table in WDJ. So if u can do any action it will comes trough BAPI.
If your BAPI having CURD methods. You can implement CURD methods in WDJAVA also.
@ You said you are getting null values from the database. Please let me know what code you have to wrote for CURD. Please tell me.
Hope this is help full for u
Best Regards
Vijay K

Reg: How to create shipment by using delivery...

HI all,
How to create shipment by using delivery...
Thanks

Hi Jamie:
Thank you for your help.
Could you please tell me what is "SQL*Plus session"?
I modified the code into:
Statement Stmt = Conn.createStatement();
Stmt.executeUpdate("CREATE VIEW csclass AS SELECT * FROM CSGRADE10");
The error message is the same:
SQLException: Error during query: Unexpected Exception: java.sql.SQLException message given: Syntax error or access violation: You have an error in your SQL syntax near 'VIEW csclass AS SELECT * FROM CSGRADE10' at line 1
SQLState: S1000
VendorError: 0
I am using MySQL.
Jack

How to create bookmarks by using J2ME

Hi! Does anyone knows how to create bookmarks by using J2ME?

hey , did u get any help on this?
--vijay
Hi! Does anyone knows how to create bookmarks by
using J2ME?

How to create a trigger using 9211 modules with cDAQ-9174?

Similar Messages

Maybe you are looking for