How to create a unique group field in Qualifier table
Hi,
I am trying to use a qualified table in Product maintable like "Site items".
However I would like to have two non-qual field in that like 'Plant' and 'item#' which should be an unique combination.
I have tried to create a table(X) with the above two fields with display and another table (Y)that uses the table X for lookup (site-item) so as to make it dispaly and unique both. However when i am using this Y table as a lookup for the qualified table(site items) , not able to load data.
Error message:
"Import failed. Unable to find source column index for 'Site Item ID' field"
Another issue also not able to populate data for the qualified flds even if when able to load data without making a group unique field for this qualified table.
In MDM 5.5 sp4. Thanks in advance for any tips.
-reo
Hi Beena,
In the above post of mine I suggested you to use STRING data type.
As you are telling that when creating TABLE MAINTANENCE GENERATOR you are
getting an error saying that " Datatype STRING is not supported ". I tried this, what you said is right.
After your reply I did research on this and I also met my heads,
The conclusion is <b>IT IS NOT POSSIBLE TO GENERATE TABLE MAINTANENCE</b> for the table which is using STRING type. At last I can give you one suggestion, i.e., In the short text of that field write STANDARD TEXT name.So that whenever you want, go to this standard text, but the problem is you have to maintain it manually.
<b>Reward all helpful answers.</b>
Regards,
V.Raghavender.
Similar Messages
-
How to create a authority group for our customer table(se54)?
Hi,everyone:
I found a problem when I create a authority group for my customer table,I can't write the creation
to a request no(can't assign to a package),I want to know whether the authority group I created can be
transport to the PRD when I realse the request no.
Thanks!!!Auth Group is nothing but a table entry so for sure it can be transported to any environment, before Assigning any Auth group create one in SE54 when you try saving it it would ask you the TR number which you can transport to PROD.
-
How to create F1 help for fields of a table in SM30
I have a z-table which is being maintained using SM30. while creating new entries for the z-table using this SM30 i want to create F1 help which will be useful for the user to create new entries. can anyone pls help we this requirement?
Hi Lalitha,
To have F1 help documentation, you need to create Documentation by pressing Documentation button in the Change Data Element screen (SE11)
If you need certain values for the field through F4 help then you need to specify the values in the Domain of this Data element (SE11)
Jogeswara Rao K -
How to create Static Record group in Oracle Forms??
Dear All,
I have the following values V1,V2 to be placed in my list item field during DML operations.
I have an example to create the record group based on the table; whereas i have never tried for static value creation.
Could you please guide me how can i acheive this.?
Thanks ....
Regards,
Sunil.GThanks dhivya for your reply.
Actually what happens is; when i use the same methodology as you mentioned, it is asking me to set the Initial value.
Whereas in my applications; user has to manually select any of the values i.e eithe V1 or V2 for the first time.
Moreover i have found the query:-
I have created a static record group RG_VERSIONS i.e creating a new record group with the static values mentioning the "Column names " as "Version_label" which i have given the column values as "V1" and "V2" and then another column name as "Version_value" with the column values as "V1" and "V2".
Then i used the below query in the WHEN-NEW-FORM-INSTANCE trigger:-
PROCEDURE p_when_new_form_instance
IS
l_rg_id recordgroup;
l_item_id item;
BEGIN
--Populating value for Version Type based on static record group
l_rg_id := FIND_GROUP ('RG_VERSION');
IF NOT ID_NULL (l_rg_id)
THEN
l_item_id := FIND_ITEM ('BLOCKNAME.COLUMN_NAME');
POPULATE_LIST (l_item_id, l_rg_id);
END IF;
END p_when_new_form_instance;
Then it was working fine.
Thanks for your time.
Regards,
Sunil.G
Edited by: Sunil G on Jun 27, 2010 6:00 AM -
How to create Infoset&user group query--(query report)
Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .Ggoto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu -
How to create a unique key using two or more attributes?
how to create a unique key using two or more attributes ?
The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”. -
How to create Formula based value field in COPA
Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh RThe key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas -
How to create Rules with Flex Field mapping in the bpm worklist
I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian -
How to create the sub type field in hr abap infotype
hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create Using Formatted Text Field with multiple Sliders?
Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
// constructor
label1 = new JLabel( "Individuals" );
scroller1 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 10 );
scroller1.setMajorTickSpacing( 10 );
scroller1.setMinorTickSpacing( 1 );
scroller1.setPaintTicks( true );
scroller1.setPaintLabels( true );
scroller1.addChangeListener(this);
java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
NumberFormatter formatter = new NumberFormatter(numberFormat);
formatter.setMinimum(new Integer(0));
formatter.setMaximum(new Integer(100));
textField1 = new JFormattedTextField(formatter);
textField1.setValue(new Integer(10)); //FPS_INIT
textField1.setColumns(1); //get some space
textField1.addPropertyChangeListener(this);
//React when the user presses Enter.
textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField1.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
label2 = new JLabel( "Precision" );
scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
scroller2.setMajorTickSpacing( 10 );
scroller2.setMinorTickSpacing( 1 );
scroller2.setPaintTicks( true );
scroller2.setPaintLabels( true );
scroller2.addChangeListener(this);
textField2 = new JFormattedTextField(formatter);
textField2.setValue(new Integer(10)); //FPS_INIT
textField2.setColumns(1); //get some space
textField2.addPropertyChangeListener(this);
//React when the user presses Enter.
textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField2.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
// State Changed
public void stateChanged(ChangeEvent e) {
JSlider source = (JSlider)e.getSource();
int fps = (int)source.getValue();
if (!source.getValueIsAdjusting()) { //done adjusting
if(source==scroller1) {
System.out.println("source ==scoller1\n");
textField1.setValue(new Integer(fps)); //update ftf value
else if(source==scroller2) {
System.out.println("source ==scoller2\n");
textField2.setValue(new Integer(fps)); //update ftf value
} else { //value is adjusting; just set the text
if(source==scroller1) textField1.setText(String.valueOf(fps));
else if(source==scroller2) textField2.setText(String.valueOf(fps));
// Property Change
public void propertyChange(PropertyChangeEvent e) {
if ("value".equals(e.getPropertyName())) {
Number value = (Number)e.getNewValue();
if (scroller1 != null && value != null) {
scroller1.setValue(value.intValue());
else if (scroller2 != null && value != null) {
scroller2.setValue(value.intValue());
// ACTION PERFORMED
public void actionPerformed(ActionEvent event) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
...if :p3_note_id is null
then
insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
Another option is that you have a trigger on table NOTES that generates a new note_id even for an update. -
RV120W- How to create new unique self-signed certificate?
Hello,
how to create new unique self-signed certificate on RV120W? I can create request for singning by external CA, but I cannot create new unique self-signed certificate itself. Any idea? Did I miss something? Many thanks!
AbudefSo basically RV120W does not support self-signed certificate? It only allows to generate private key and certificate signin request. There is no chance to replace default generic ssl/vpn certifice within router itself? Could you please give me an advice, how to sign that request by some "CA"? I mean no commercial CA, I need something free running under Windows os. Many thanks!
-
How to create new storage group and mailbox database on exchange 2007 CCR
Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
How to create a function group (step by step)?
I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y. -
How to create a Unique Member List for PlugAccounts ?
Hello everybody,
Does anyone knows or did it in the past how to create a Unique Member List for Plug Accts? If anyone does could you please paste some scripting for reference?
Thank you very much, JBDim arrPlugs(100)
j = 1
Plug_Acct_List = HS.Account.List("","")
For Plug_Acct_loop = LBound(Plug_Acct_List) To UBound(Plug_Acct_List)
If Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop)) <> "" then
strPlug = Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop))
blnFound = False
For i = LBound(arrPlugs) to UBound(arrPlugs)
If arrPlugs(i) = strPlug then blnFound = True
Next
If blnFound = False then
HS.AddMemberToList strPlug
arrPlugs(j) = strPlug
j = j + 1
End If
End If
Next
Maybe you are looking for
-
Bound CFSelect not working (with or without search box)
Hello, I'm on WS2008 (64-bit) with IIS and CF9.0.1 (32 bit) and can't seem to get a bound CFSelect to work at all. CFGrid and other AJAX contriols work great. The code (shown below) appears to run without errors but the option tags are never generate
-
How can I recover my currupted PDF file?
I was working on comments for my PDF file (writing comments) suddenly my laptop got hung and when I restarted the computer and tried opening the file it showed the following comment "ädobe reader could not open the file because it is either not suppo
-
Problem in TRFC queue (SM58) - IDOC2FILE scenario
Hi, I am executing IDOC2file scenario. In the transaction we19, i have successfully posted the IDOC to external system (XI). But the iDOC is still in TRFC queue. (SM58 or BD87). <b>Recipient details</b> Port : RFC in We21. Partner No. : XI logical na
-
Save tree structure to text file and load textfile to another tree control
I'm able to save the structure and data to a text file, thanks to the "save tree structure to textfile" info found on this msg board, but can't seem to load the complete tree structure data from the text file into another tree. I've only been able to
-
Unable to insert rows into the table
My insert statement below is not correct, when i try run, its encoutering error "table or view does not exist". Basically what i am doing here is collecting the table name in FOR variable which stores the table name in this variable. This variable, i