How to create a version that looks like the "quick preview" image?

Is there a way to easily create a version that is similar in appearance (mostly apparent as saturation)to what is seen when hitting the P key and viewing the "quick preview"? I shoot raw (Canon .cr2) and find that for many of my shots, the "quick preview" would be a nice starting point, and often a fine end-result, for saturation. Any hints welcomed. Thanks. Fred

Thanks for your comments and I certainly agree with your suggestions. I was hoping that there was something that I was overlooking that would essentially work like a "lift/stamp" and let me find settings that were embedded in the camera generated jpg. I know that you know your way around Aperture, so if you don't have a trick up your sleeve, I think it's probably not to be found.

Similar Messages

  • HT3204 I updated my iphone 4 and now it won't turn on. All i get is the itunes logo and an image that looks like the charger plug.

    I UPDATED MY IPHONE 4 AND NOW IT WILL NOT TURN ON. ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.

    plumbin wrote:
    .... ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

    I'm thinking about buying an iMac, but I'm used to a multiple monitor setup. Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

    Look at these links.
    http://store.apple.com/us/product/MC914LL/B/apple-thunderbolt-display-27-inch?fn ode=53
    http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)?fnode=53
    Allan

  • How to create a form that will allow the applicant to upload their photo

    I have Adobe Acrobat 9 Pro Extended and I know how to create forms that require text input.
    How to create a form that will allow the applicant to upload their photo? I alo wish to know how to upload a photograph so that I can test the form I created.
    Thank you
    Adrian Watts

    test@ORA10G> with x as (
      2    select '234-1111' as customer, to_date('2-Jan-2008','dd-Mon-yyyy') as call_date, 'Order product' as reason from dual union all
      3    select '234-1132', to_date('3-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
      4    select '231-1154', to_date('4-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
      5    select '234-1111', to_date('2-Nov-2007','dd-Mon-yyyy'), 'Order product' from dual union all
      6    select '234-1132', to_date('9-Jan-2008','dd-Mon-yyyy'), 'Request info' from dual union all
      7    select '231-1154', to_date('9-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
      8    select '234-1111', to_date('5-Dec-2007','dd-Mon-yyyy'), 'Order product' from dual union all
      9    select '234-1131', to_date('7-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
    10    select '231-1154', to_date('1-Sep-2007','dd-Mon-yyyy'), 'Request info' from dual union all
    11    select '234-1111', to_date('8-Jan-2008','dd-Mon-yyyy'), 'Order product' from dual union all
    12    select '234-1131', to_date('3-Dec-2007','dd-Mon-yyyy'), 'Request info' from dual union all
    13    select '231-1154', to_date('4-Nov-2007','dd-Mon-yyyy'), 'Forward to Sales' from dual)
    14  --
    15  select customer,max(call_date), reason
    16  from x
    17  where reason = 'Request info'
    18  group by customer, reason;
    CUSTOMER MAX(CALL_ REASON
    231-1154 09-SEP-07 Request info
    234-1131 07-DEC-07 Request info
    234-1132 09-JAN-08 Request info
    test@ORA10G>
    test@ORA10G>pratz

  • The top bar changed when I downloaded firefox 5.o how do I get it to look like the old style? It also makes all my pages really zoomed out so I have to zoom in to see them.

    The new menu bar is all boxy looking and I want the old style back that looked like this http://images.six.betanews.com/screenshots/1100800989-1.png
    Also every time I visit a new page it makes it really small so that I have to zoom in to see it which is annoying because before I downloaded 5.0 it was fine.
    My computer is a toshiba laptop and I am using windows vista.

    Your original had tabs on top, the current one does not. Also I note a dark background, is that some none default theme or persona, or a side effect of system display changes ?
    I have noted others comment about pages needing zooming, no idea why that happens on some sytems, possibly something to do with the font changes.
    I do not notice much difference between versions screenshot attached Firefox 4 and Firefox 6.0a2 open adjacent to each other.

  • How to create a user that can login the LDAP?

    I want to create a user that can login the OID/LDAP. I know how to create a user, it is allowed to login OIDDAS, but I also want the user to grant access to ldap directly. How do i do that?
    And how can I give it read rights and or update/delete rights on a specific tree?
    Regards
    Eelco

    Eelco,
    did you see the OiD developers guide? Here you find some examples how to create users in OiD using pl/sql or java.
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95193/smplcode.htm#637294
    how to use directory access control can be found in
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95192/access.htm#1054232
    --Olaf

  • My i phone 3G has a small part in the screen that looks like the pixiles are out of place and is discolord do you know what i can do to fix it or if i can fix it

    my i phone 3g has a psrt in the screen where it looks like the pixles are out of place and its disscolord what can i do

    please answer

  • I want to print an 8 x 10, but the photo does not look like the print preview - it truncates part of the picture

    I am using an HP PSC 2355 printer - and have not had trouble printing before. The 8 x 10 photo does not print like the print preview does - everything elarges when the actual print completes, which truncates all details that need to be printed. Is ther a setting that I should be choosing?

    There is no O or L in my Serial Number, and it starts with one single D, then a set of 3 numbers, 3 letters, 4 times, then 3 letters closing it down. When I check my Final Cut's serial number in the help section of the software, I get the same number. Yet, when I enter it in the site, it says, I have an invalid serial number. So I will call Apple Care. I hope I will be able to talk to a representative in an hour or so. It always takes so long that I grow beard while I wait.

  • How can I create a button that looks like this?

    Hey everyone,
    I'm trying to create a button in photoshop for a web project I'm working on and I found something similar to what I'm trying to do already being used online. I'm trying to get something similar to the bottom row of buttons in this image:
    The bottom row of buttons uses a gradient overlay effect... but there is a small darker area in the top left corner of each of those images. It looks to be exactly the same in each image... meaning I'm guessing it's not hand drawn with something like the burn tool?
    How would I go about doing something similar? What's the easiest way to reproduce the effect shown above keeping it consistant from button to button?

    One way is using layers.
    Color layer on the botton so changing colors simply change color layer.
    Place all your image effects on the overlying layers.

  • Safari: How to follow a link that looks like a phone number?

    When I try to log in to GrandCentral Mobile, it presents me with my phone number as a link after the log in page. If I touch the link to confirm and follow it, the iPhone recognizes the number format and offers to dial it for me. If I hit "cancel" it cancels, but does not follow the link.
    Any suggestions?
    -Peter

    OK, Matt. You finally beat it into me. I see the "other" field now. I tried that, but with the same results.
    However, I found the solution for this particular website: You actually have to tap the radio button to the left of the number, then tap the "Submit" button at the bottom of the list. That way the iPhone won't think you're tapping on a phone number. If I had more than a single number in my "list", I might have noticed that.
    It seems like this could still be an issue in other situations.
    Thanks for the help.
    -Peter

  • Looking for a theme that looks like the default theme.

    I'm looking for a theme that looks exactly like the default theme, but that doesn't use the colours of my gnome theme. Right now I'm using a dark gnome theme that looks great, but looks horrible with firefox. Anybody got any suggestions?
    Alternatively, is there another way to make firefox ignore my gtk theme?

    I don't like the way firefox themes look, I want the default theme, but without gtk coloring. Surely it must be possible?

  • How to create a latch that can latch the input data for 50ms?

    Now I have some data come from the sensor. I want to latch this data for 50 ms and then reset it to 0. Does anybody do this before? Thank you

    Now I am using the "two button dialog" to create a dialog box. After the dialog box pop up, I choose "yes" the "two button dialog" will output a "True". My problem is that this "True" disapear too fast. My while loop frequency is only 20Hz. And I want to send this "True" value to somewhere. However the two "button dialog" will clear this "True" after 10ms?. So I always got a "false" value. How to "Freeze" this dialog box output value for at least 50ms? How to create a latch to hold this value?
    Attachments:
    Two_button_Dialog.bmp ‏1132 KB

  • Stickies for desktop thats looks like the Stickies widget?

    So, yeah. Is there a way to modify the Stickies program to make it look like it does in the widget, like an actual sticky note? Sorry if this seems off topic. This was the best section of the forum I could find for it. Any help help would be much appreciated.

    Also for the record I verified disk permission, fixed them and also ran the repair disk from with the normal OS as well as restarting into the utility mode.
    And the volume appears regardless of the account type. I logged into another account just to see if it was only on my user and it shows up there too. When I boot into OSX it only shows up about 5-10 seconds after I get to the desktop.

  • How to create custom thumbnails per episode like the TED videos on Apple TV?

    Not many podcasts do this but I do see TED for example have a different thumbnail per episode on Apple TV (note: iTunes shows different thumbnials because it picks a frame from the video). I'm referring to Apple TV 2 to be precise. Can't figure this out....
    Thanks in advance,
    -g
    PS Our podcast is ChatChow.tv

    They're the same podcast: one is the feed and one is the iTunes Store page. I checked the latest episode: it has an image embedded in the media file which shows until you start playing the video (right).
    There are also two additional tags in within the 'item' tags for the episode, a 'media:thumbnail' tag and an 'itunes:image' tag, both containing an image of a saucepan of brussel sprouts:
    neither of these tags is recognized by iTunes (only the 'itunes:image' tag in the top section of the feed, and that only in the Store, not when subscribing).
    What does the Apple TV show? - is it this image?

  • Searching for how to create a page that will recreate it self and image uploader!

    Greetings,
    Does any one knows how I could create client side page that would always recreate it self when a new clients to signs up and become a member to my blog site, so they could manage and add friends to their page and upload image to their album? The idea is to have pages added like it is on Facebook, when a member signs up.
    If I server side software is need in order to achieve this goal; what type of server side software do I need for this design? Please contact me if you have any idea.
    I also would like to receive any information on where to find script that will help visitors upload images to my site.
    I have done with other parts of my web design adding this idea is all I need to finish. Your help is immensely appreciated.
    Joplateau.

    You may want to ask in a more generalized forum such as http://forums.adobe.com/community/design_development/webdesign. This one is specifically for Adobe Contribute (which won't do what you want) and is seldom visited. Good luck.

Maybe you are looking for