How to create a view?
HI friends,
Can any one help me out in creation of view i am suceeded in creation but while display it is showing no records
i think i am going wrong in selection conditions....can anyone give me clear steps to create a view.?
Hi,
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
cheers,
vasavi
kindly reward if helpful
Similar Messages
-
How to create i view in visual composer give details screenshots
how to create i view in visual composer give details screenshots
Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939 -
Hi all,
i am new to can u tell me how to creata a view. and how we can create node.and how we can create outbound plug and inbound plug.
thanks & regards
naveenHi Naveen,
In the component click on view qith the right button and select "Create View" follow the steps. Its a very simple wizard.
Let me know if you have more issues.
Best regards,
Caíque Escaler -
How to create a view in R/3?
Hello, Can anyone plz gimme step by step how to create a view in R/3....
Hi dear,
go to SE11, out your Z* view and click create...
Then choose your source tables, the join condition between them and, finally, all the fields (coming from source tables) you need for your purposes...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/cf/21ed06446011d189700000e8322d00/content.htm
Hope it helps!
Bye,
ROberto -
How to create a view with Oracle apps Org initialization ?
Hi,
How to create a view which needs Oracle apps org initialization to provide the correct data .
The purpose of the view is to be accessed in Primavera DB via a DB link for reporting purpose.
So how should the org be initialized so that the view returns the correct data when accessed from the remote data base using the DB link?
EX: step1 run fnd_client_info.set_org_context for the org
step2 query the veiw returns correct data in Oracle.
How can this be achieved if the view needs to be accessed via DB link?
sample view sql :
select po_header_id
from po_distributions_all pod
where (apps.po_intg_document_funds_grp.get_active_encumbrance_func
('PO',
pod.po_distribution_id
) <> 0
Thanks in advance!
DarshiniHi,
This is not possible in Oracle. What u can do is create the view without the where clasue and supply the where clause at runtime.
Hope this helps...
Regards,
Ganesh R -
How to create a view on tables with different keys?
I have to create a View on:
Z3PVR: Transparent Table
BSEG: Cluster Table
CKIS: Transparent Table
BKPF: Transparent Table
RV61A: Structure
T001: Transparent Table
All the tables have different "Key Fields" and the structure has no "Key Fields". When i create the view, what do I mention in the "JOIN FIELDS" tab. and how do i create the view with the structure?
Please advise.How to create a view on a Non-Transparent Tables.
how to create view?
HELP.. How to create a view with the tables with ALV -
How to create a view indicating column's length?
SQL>create table abc (a number(12));
I want to create a view cde with a length of number(5) by "describe cde" in sql*plus.
SQL>create view cde(a) as select a from abc;
SQL>desc cde
A NUMBER(12)
how to create a view indicating column's length? the actual value in abc only <1000
I want to create a view cde with a length of number(5) .
SQL>desc cde
A NUMBER(12)
Thank You
Ming-An ZhangThis does not make sense. How can a view be a NUMBER(5) and the actual column a NUMBER(12)?
What happens if there is a 10 or 12 digit number in the table? Just what is the view suppose to do? Crash and burn? Where is the logic in that?!
If the table's column has an incorrect precision and size, THEN FIX IT!! Do not hack it with view!
It is silly purposefully building constructs into the database that can easily result in run-time errors. -
How to create a view dynamicly in plsql?
I need to write a pl/sql package to create a view dynamic
,but i can't use 'create or replace view xxxx as select *
from db where ...',I know the dbms_sql package can parse the
'select' sentence,but i don't know how to create a view,only can
drop a view,who can help me?
thanks!
nullTry 'EXECUTE IMMEDIATE 'CREATE AS SELECT....' in your PL/SQL
xhpxorcl (guest) wrote:
: I need to write a pl/sql package to create a view dynamic
: ,but i can't use 'create or replace view xxxx as select *
: from db where ...',I know the dbms_sql package can parse the
: 'select' sentence,but i don't know how to create a view,only
can
: drop a view,who can help me?
: thanks!
null -
How to create a view object and attach with extended AM
Hi,
I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
and another one with some other condition.
So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
But i want same seeded VO with two different condition.
Any suggestions please,
SANSAN,
There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
Regards,
Gyan -
How to create dynamic view in hr report category
i want to make company code mandetory in in selection screen given by logical data base PNP here i want to make field mandetory. so how to create dynamic view in hr report category.
thanks in advancesolved by self
-
How to create XMLTYPE View from the XMLType table
Hi:
I have a large XML file and inserted to the XMLTYPE table
For the XQUERY purpose I would like to create XMLView of the table.
The examples I got from Oracle to create XML view are for small files.
Can some one help me how to create XMLType VIEW for large XML Files ( 20,000 lines )?
Ali_2Have a look at the examples given on XMLType Views (based on relational tables) or standard views (based on XMLType storage) in the FAQ url located on the main page of this forum site regarding XMLDB.
-
How to create GOS view attachment list in ECC6
Hi,
I created Z transaction. I have to create View attachment List to this transaction. How to create GOS view attachment list in ECC6. can anybody send sample code on this.
Thanks in advance.
Zakir.Hi all,
I've following problem with class CL_GOS_ATTACHMENTS.
Transaction IE01/02/03 (create/change/display equipment) starts and instantiate GOS manager, and related BAdI are called.
Then, when I choose one of available service, CL_GOS_ATTACHMENTS is instantiated, and inside that class a new GOS manager is instantiated, inspite of already existing instance.
As a result, related BAdI are called twice, but unfortunately second time some SY variables are not correctly filled, particularly SY-TCODE and SY-MODNO are both empty.
I've develop a workaround so that when sy-tcode is filled I save it somwhere, and when it's empty I filled it from saved value, does anyone know any other solution??
Many thanks
Regards
m@x -
How to create Maintaince View and Help View
Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
KumarFOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button. -
How to create new view without interlinking with gantt chart or resource views
ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource viewsHi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to create classification view for material?
HI All,
How to create classification view for material? is there any function module?
pls let me know.
Bandicheck the standard include "LCLBPAU14" this is using the following F.M
call function 'BAPI_OBJCL_CREATE'
exporting
objectkeynew = l_object
objecttablenew = l_objecttable
classnumnew = classnum_new
classtypenew = l_classtype
status = status
standardclass = standardclass
changenumber = changenumber
keydate = keydate
no_default_values = no_default_values
importing
classif_status = classif_status
tables
allocvaluesnum = allocvaluesnum
allocvalueschar = allocvalueschar
allocvaluescurr = allocvaluescurr
return = return. -
How to create table view with reference table
Hi experts,
How to create table view with reference table in SE11, plz gve me stp by stp procedure.
pints grnded for hlp.Hi
Go to Tcode se11 choose view and enter the name and create a popup opens up choose database view option
enter the description
On the left hand side choose the table name.
Click on view fields tab and choose your table fields.Here you can choose which fields you want in your view.
Save and then activate.
Hope this helps.
Regards,
Harish
Maybe you are looking for
-
Camera Raw vs Lightroom Color Spaces
I photographed RAW image of a Gregtag color target with my Nikon D300 and opened it in camera raw in the ProPhoto Color space and adjusted the develop sliders so that the tone squares on the bottom row matched the ProPhoto values, (e.g approx 238,189
-
Payment terms- installment payments
hello, how can i exaclty use installment payment in payments terms, it gives me the below msg. Breakdown into installment payments not possible for item 001 I am trying test retainge for an invoice , so it should brekup the line item depending on
-
Links to Google Docs not working
Hi, I follow a blog which posts links to soccer results and fixtures on Google Docs. When I click on one of these links when in Safari on the Mac the document opens perfectly. When I try and link to the same document in Safari on the iPhone I get an
-
IWeb not showing templates???
I need some help! iWeb, for some reason, isn't showing any templates. The only thing under the Site Organizer is "My Site", but nothing drops down from that. Can anyone help me find out what's going on and how to fix it? I was just on iWeb the other
-
Error in MDDataSetBW.GetCellData (WIS 10901)
Does anyone have any idea about the following error in Webi? This happens using SAP BI based universes. A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. No more storage space available for extending an internal