How to create a .wav file in visual basic?

I'm having the audio sample data(scaled data) in an array created by the CWAI_AcquiredData event. How do i convert this to a .wav file so that i can play back the audio data i acquired.
Can any one help me out ????????

Hello
You should probably check out the MSDN for examples on how to do this.
I think the Speech 5.1 SDK probably has some function that would help you out.
Hope this help
Bilal Durrani
NI
Bilal Durrani
NI

Similar Messages

How to create a wav file from 24bit 96Khz sampling rate data

Hi
I am trying to make an VI which will play sound while acquiring data from PXI 4472 DAQ card.
My sampling rate is 96Khz and PXI 4472 card is a 24bit card.
Wave files are in 8 or 16 bit and the sampling rate is 8000, 11025, 22050 and 44100. How will I be able to play the data which I am acquiring.
How would i normalize the data into the required format needed for most of the sound cards to play.
Or are there any codec available in Windows XP which i call to play a 96KHz 24 bit sample
Does anybody ever encountered this type of problem.
Thanks in advance
Nitin

Whilst the 'standard' RIFF format specification usually accomodates 16 bit data, there is of course no reason that you can not create your own extension. It just won't be playable by Media player using the 'standard' installed drivers or codec. This may not be a problem....
WAV files can and do support other formats, you just need to know how to handle them......
There is howerver a 4GB limit (related to the pointer size in the WAV specification) which with higher bit depths on the sampling does start to become a bit of a problem.
To give you a few samples of other types of wav files check out the following site here
http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/Samples.html
The following definitions for WAV audio formats may also be of interest here
http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html
Good luck with 24 bits.

Is there any way to create a setup file Like Visual Basic

Hi,
I want to create a setup file of all developed foms and reports to install them to desireable location, is there any way to create a setup file in oracle, Like Vb.
Raza

I believe there is something from Oracle but it was frustratingly buggy when I used it a few years back and only worked via the Oracle installer.
Personally, I'd recommend something like Innosetup, which is freeware and a Windows-style installer much like InstallShield etc. so it'll create an executable setup file probably OK if they've already got the Oracle Runtime components installed.

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

How to create Activex object for my Visual C++ object

Hi,
I am working on development on Acrobat 9.0 SDK. I am facing problem is that I can compiled Visual C++ source code to an api. I can test functions on this api on Acrobat 9.0 windows, but I could not test it on IE web browser, because I don't know how to create Activex object from my Visual C++ source code or its api.
I read Acrobat 9 SDK document and found under C:\Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard has two files: Acro9PIWizInstaller.msi and setup.exe. I am not very sure those file are the key to help me to create Activex objects for my api. Are they the one I need to create Activex object? If not, could you please advise me how to create Activex object for my api or C++ codes.
Thanks a lot for any of your comments or advices.
Thai

Hi lrosenth,
Thanks a lot for your information.
My question is, on Javascript how do I call a function from .api. Below is my very simple test.
I got a function on BasicPlugin.cpp under C:\Acrobat 9 SDK\Version 1\PluginSupport\Samples\BasicPlugin. See below.
I added BasicPlugin.api on C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins
     ACCB1 int ACCB2 MyPluginCommand() {
          int num = 5;
          return num;
On my HTML file, I create an <Object> below:
    <OBJECT id="acrobatapp"
            classid="clsid:85DE1C45-2C66-101B-B02E-04021C009402">
    </OBJECT>
    <OBJECT id="acrobatpdf"
            classid="clsid:CA8A9780-280D-11CF-A24D-444553540000"   >
        <Param name="SRC" value="http://www.adobe.com/devnet/acrobat/pdfs/acrobat_digital_signature_appearances_v9.pdf">
   </OBJECT>
On my Javascript. I call function MyPluginCommand() as below, but it is not working. How do I call function MyPluginCommand() on Javascript?
     var acrobatapp= document.getElementById("acrobatapp");
     var num= acrobatapp.MyPluginCommand();
     alert(num);
Thanks for your support,
Thai

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

How to create a *.lnk file in the ipaq

how to create the .lnk file and where in the Ipaq?
if yes so how or can u write me an example
thanks itzik

-Connect your PDA to your Desktop
-Using windows Explorer you can make shortcuts by right clicking on the file you want...
Marco

How to create a .jar file in wlcs3.1

hello friends,
hi friends, im working on weblogic commerce server3.1 . i dont know how to create a .jar file in weblogic commerce server3.1. can any one knows send email to me.
thanks.
hari

$JDK_HOME/bin/jar (%JDK_HOME%\bin\jar) shows you the syntax
where JDK_HOME is your jdk installation directory.
Kumar
hari wrote:
hello friends,
hi friends, im working on weblogic commerce server3.1 . i dont know how to create a .jar file in weblogic commerce server3.1. can any one knows send email to me.
thanks.
hari

How to create a PAR file in Web Dynpro

Hi !!
Could any one tell me how to create a par file of the java application developed in WebDynpro..
thanks
ChandraSekar Maheswaran

Hi,
Refer the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/a-c/creating%20your%20first%20web%20dynpro%20application.pdf
Webdynpro concepts
Regards,
Tamil K

How to Create a PSD file in C#

How to Create a PSD file in C#

Converting an image file to .psd is easy in Aperture - just export the image version with one of the export presets "PSD - Original size" or "PSD - Half size".
But I suspect, that will not solve your problem, since you are trying to create a watermark in Aperture and probably want to create a transparent background for the watermark, to give it an arbitrary shape. That cannot be done in Aperture. Aperture does not support compositing and layers. If you want to create an image of an arbitrary shape with a transparent background you need to use a program that supports compositing. Since you do not have Photoshop, you could try the free GIMP instead (afaik, there is no Lion version of GIMP; the most recent version is Mt. Lion only; you could try if the Snow Leopard version works on your system).
Any program that you own, that lets you write or draw on a transparent background will be fine. The Watermark file does not necessarily need to be a psd-file. A png will also work. You can also use Preview to convert between image formats or to annotate an image with text.
Regards
Léonie

How to create a CSV file in java

how to create a CSV file in java

this is the code that I have used in a hp project:
private static final String DELIMIT = ",";
StringBuffer buf = new StringBuffer();
public void addString(String str){
buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim())).append(DELIMIT);
public void sendFile( String strData ,
                            String strTitle,
                            String strContType,
                            HttpServletResponse res ) throws IOException {
          byte[] _filedata=strData.getBytes();
          res.setContentType( strContType );
          res.setHeader( "Content-Disposition", "attachment;filename="+ strTitle );
                 DataOutputStream out = new DataOutputStream( res.getOutputStream() );
          out.write( _filedata, 0, _filedata.length );
          out.close();
public void addStringWhithReturn(String str){
          buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim()));
          buf.append( "\n" );
private String toEscapedStringLiteral( String charSeq ) {
          if ( null == charSeq ) {
               charSeq = "";
          return "\"" + charSeq + "\"";
....hope its help
kou

How to create a Batch file for java application ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

[http://static.springsource.org/spring-batch/]
Assuming you want to develop a batch application rather than actually just create a .bat file ..

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How to create a .wav file in visual basic?

Similar Messages

Maybe you are looking for