How to create a Web Authentication Meathod using Server 2008 r2 ?

HI, i am a NewBee in Server Managment. am using windows server 2008 R2 Enterprise Edition, with 2 NiC One is Connected to modem other one connected to Lan , using ICS for internet . i have 80 client computers , all clients have access to unlimited internet,
i want to control them without 3rd part application, or Create a Web authentication username and Password for users , is there any possible way to create a web authentication server in server 2008 r2 ? plz give me a proper guideline.....

Hi,
According to your description, my understanding is that you want to configure web authentication that allow the client to connect to Internet by password and user name.
I am afraid that no function within Windows Server 2008 R2 may fulfill your requirement.
For better control of your clients, I would recommend you to configure the Windows Server 2008 R2 as an RRAS (dial-up) router(use NAT to assign private IP address for the internal network), and connect to the clients with intermediate device, such as hub,
switch. Cooperate with NPS to provide authentication for network connection.
3rd party software/device should be needed for configuring web authentication. Here is a deployment scenario just for your reference:
Web Authentication Using LDAP on Wireless LAN Controllers (WLCs) Configuration Example
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108008-ldap-web-auth-wlc.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Eve Wang

Similar Messages

How to create a web instance in weblogic?

          Dear All,
          I want to know how to create a web instance in weblogic server?
          Furthermore , where can i get more info. about the weblogic
          server , including how to use those examples pages provided from
          weblogic server, sampling of procedure to config each service ,
          e.g EJB , JSDB , JTA , etc., .
          thanks,
          chris


Read the new JSP1.1 and servlet 2.2 specific for more information on
          this. You can deploy several jsp files in a single war file on a server.
          -- Prasad
          chris lee wrote:
          > Dear Prasad Peddada
          > Thank you for your helpful information.
          > I've read the page you have mentioned, I want to know
          > if I've serval pages written in jsp, how should I do if I
          > want to access those pages under the weblogic server?
          > Furthermore, Does the 'applicantion' mention in the paragraph
          > is the web instance I mentioned before?
          >
          > Thanks,
          > chris
          >
          > Prasad Peddada <[email protected]> wrote:
          > >http://edocs.beasys.com/wls/docs60/index.html
          > >
          > >-- Prasad
          > >
          > >chris lee wrote:
          > >
          > >> Dear All,
          > >> I want to know how to create a web instance in weblogic
          > >server?
          > >> Furthermore , where can i get more info. about the weblogic
          > >> server , including how to use those examples pages provided
          > >from
          > >> weblogic server, sampling of procedure to config each
          > >service ,
          > >> e.g EJB , JSDB , JTA , etc., .
          > >>
          > >> thanks,
          > >> chris
          > >
          Cheers
          - Prasad

How do I create a web streaming app using digital publishing suite?

Hello, and thank you in advance. I'm looking for tutorials and guides on how to create a web streaming version of an app using digital publishing suite. Can anyone point me in the right direction.

Please tell us what you mean by "web streaming." Are you referring to a version of the content that can be viewed in a web browser?

How to create A web services step by step and their uses

How to create A web services step by step and their uses with their T-Codes
pls dont send any links
thank you
Regards,
Jagrut Bharatkumar Shukla

Hi
Use the Tcode <b>WFWS</b> to create the Web service
enter the Transaction to whih you wants create the web service and save
Regards
Anji

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

Errors creating a Web Service Proxy using Microsoft WSDL.exe tool

I have deployed a BPEL process using JDeveloper. This process can be invoked from the BPEL console and completes as expected. I am trying to create a Web Service Proxy using the Microsoft WSDL.exe tool so that the process can be invoked from a Microsoft Word document. This process is based on the AutoLoan example in the Developer's Guide for Microsoft Office Interoperability B25781-01.
WSDL.exe returns the following error message
Error: There was an error processing 'http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl'.
- The document at the url http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl was not recognized as a known document type. The error message from each known type may help you fix the problem:
- Report from 'WSDL Document' is 'There is an error in XML document (19, 7).'.
- A schema with the namespace '' has already been added.
- Report from 'DISCO Document' is 'Discovery document at the URL http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl could not be found.'.
- The document format is not recognized.
- Report from 'XML Schema' is 'Expected Schema root. Make sure that the root element is <schema> and the namespace is 'http://www.w3.org/2001/XMLSchema' for an XSD schema or 'urn:schemas-microsoft-com:xml-data' for an XDR schema. An error occurred at , (2, 2).'.
How do I resolve this error?

The WSDL file is below.
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="HonorariumSmartDoc" targetNamespace="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/HonorariumSmartDoc">
- <types>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/HonorariumSmartDoc" schemaLocation="HonorariumSmartDoc.xsd" />
</schema>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://erp.template.co.uk:8889/orabpel/xmllib/ws-addressing.xsd" />
</schema>
</types>
- <message name="HonorariumSmartDocResponseMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessResponse" />
</message>
- <message name="HonorariumSmartDocRequestMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessRequest" />
</message>
- <message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo" />
</message>
- <message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo" />
</message>
- <message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID" />
</message>
- <portType name="HonorariumSmartDocCallback">
- <operation name="onResult">
<input message="tns:HonorariumSmartDocResponseMessage" />
</operation>
</portType>
- <portType name="HonorariumSmartDoc">
- <operation name="initiate">
<input message="tns:HonorariumSmartDocRequestMessage" />
</operation>
</portType>
- <binding name="HonorariumSmartDocBinding" type="tns:HonorariumSmartDoc">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="initiate">
<soap:operation style="document" soapAction="initiate" />
- <input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <binding name="HonorariumSmartDocCallbackBinding" type="tns:HonorariumSmartDocCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="onResult">
<soap:operation style="document" soapAction="onResult" />
- <input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <service name="HonorariumSmartDocCallbackService">
- <port name="HonorariumSmartDocCallbackPort" binding="tns:HonorariumSmartDocCallbackBinding">
<soap:address location="http://set.by.caller" />
</port>
</service>
- <service name="HonorariumSmartDoc">
- <port name="HonorariumSmartDocPort" binding="tns:HonorariumSmartDocBinding">
<soap:address location="http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0" />
</port>
</service>
- <plnk:partnerLinkType name="HonorariumSmartDoc">
- <plnk:role name="HonorariumSmartDocProvider">
<plnk:portType name="tns:HonorariumSmartDoc" />
</plnk:role>
- <plnk:role name="HonorariumSmartDocRequester">
<plnk:portType name="tns:HonorariumSmartDocCallback" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>

How to create a Web ADI template and save it in our apps?

Hi all,
I want to create a user enrollment template it Web ADI so that I can send the form to the client and they will just fillup the spreadsheet with all the users they want to add to the system then load it using Web Adi.
For example this form is:
I want to create a Web ADI template for the forms above, which is saved in the apps database. Just like the template sample below:
1. Add Oracle WEB ADI you your responsibility. Explore how to create document etc
2. Using Oracle General Ledger, go to Enter Journal and click on Launch Journal Wizard..from there you can create document similar to attached
Please help how to create templates like this.
Thanks a lot,
mk

Hi Rajen and all,
The sample tutorial you and Aj gave me seem for older version like 11i or 12.0. Can i still apply or follow it for 12.2?
You also mentioned:
My approach when I started was more like the "baby step" method ... started with something simple with these 2 responsibilities and a simple integrator and then continued by adding new features (like LOV, PopLists, Contents, playing with layouts, using FNDLOAD, etc....). It's an interesting experience.
Do you have the docs you follow to do the above process? What 2 responsibilities are you referring to? It is "Desktop Integration" & "Desktop Integration Manager"?
I thought "Desktop Integration Manager" is the super-user and has all the "powers" needed for adi?
What powers does "Desktop Integration Manager" have, that "Desktop Integration" does not have? and vice-versa.
Thanks a lot,

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

Error while creating a web proxy service using wsdl

Hi folks,
In my use case I should create a web service proxy using the wsdl. While I am creating the
web service proxy I am getting some error like the binding method does not have the SOAP extension.
I am giving the error below for more clarity
Caused by: oracle.j2ee.ws.common.tools.api.WsdlValidationException: input message of binding operation "createReference" does not have a SOAP body extensionCaused by: oracle.j2ee.ws.common.tools.api.WsdlValidationException: input message of binding operation "createReference" does not have a SOAP body extension
What could be the problem? Kindly help me on this.
Thanks,
Phani

Hi,
I guess wsdl URL for Data source is not working as expected
See
http://blogs.oracle.com/middleware/entry/calling_web_services_using_adf_11g
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/webservices/ws.html

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create ringingtone into my iPhone using macbook?

pls teach me how to create ringingtone into my iphone using macbook...

Have you installed iOS 5 on your iPhone 3GS?
If not - then connect it to iTunes, and prepare yourself for a very big download!
It will give step by step instructions once iOS 5 is installed.
Cheers,
Rodney

How to create an RDBMS event generator using wlst on weblogic 10.3

how to create an RDBMS event generator using wlst on weblogic 10.3, i got a code fragment needing class "com.bea.wli.management.configuration.RDBMSEventGenChannelConfiguration"
but i can' t find this class in classpath on weblogic 10.3, pls help me, thanks. code sample is better.

Hi,
RDBMS Event Generator Channel Rule Definition
When you are creating channel rule definitions in the WebLogic Integration Administration Console, it is recommended that you do not use the Back button if you want to resubmit the details on a page.
You should always use the navigation links provided and create a new channel rule definition.
http://download.oracle.com/docs/cd/E13214_01/wli/docs85/deploy/cluster.html
http://download.oracle.com/docs/cd/E13214_01/wli/docs81/relnotes/relnotesLimit.html
http://otndnld.oracle.co.jp/document/products/owli/docs10gr3/pdf/deploy.pdf
This problem has been seen in the past when defining the channel rule for an RDBMS Event Generator if schema name was specified with the incorrect case (i.e. lowercase when it should have been uppercase or vice versa). To that end, it is suggested to change the case of the schema when creating the channel rule
Regards,
Kal

How to create an apple id without using credit card

how to create an apple id without using credit card.. i have recently purchased apple iphone 3gs bt unable to get apps because of giving credit card info which i dnt hav.. so plz tel me some way to process..

To get the none option, sign out of anything apple you're signed into. Go to the app store and try to download a free app, any free app. Instead of signing in, take the option to to make a new apple ID. Then go through the steps to make the ID and you'll see the 'none' option.

How to create search function (af:query) using method in java

hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmt

Hi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank

How to create autofilter in excel page using jxl api?

Hi Friends,
I am using jxl api for excel generation. Its no problem
but i need to set auto filter options. I am search in this API package but i can't find it.
Any one know how to create autofilter in excel page using jxl api?.
Please ..... Its urgent.... ...
Thanks

Hi,
Please mail me on [email protected] if u will find any solutions, i will do the same if i will find any...
Thank u in advance,

How to create a Web Authentication Meathod using Server 2008 r2 ?

Similar Messages

Maybe you are looking for