How To Create ABAP Code For HR Context Sensitive Structural Authorization

Hello,
We have created a HR Custom Program which IS NOT built off the PCH or PNP Logical Database. As a result, we need to manually create ABAP code for HR Context Sensitive Structural Authorization Check in our custom HR program. Via HR Context Sensitive Structural Authorizations, we are restricting access to personnel numbers and the underlying HRP* tables.
Any assistance would be greatly appreciated with the identification of the SAP standard function modules (Ex. RH_STRU_AUTHORITY_CHECK, HR_CHECK_AUTHORITY_INFTY, HR_CHECK_AUTHORITY_INFTY , etc) used in HR Context Sensitive Structural Authorization Check, how they are used to control HR Structural authorization (P_ORGINCON), and some sample code.
Thank you in advance for all your assistance,
Ken Bowers

Hello Ken
You can use the interface methods IF_EX_HRPAD00AUTH_CHECK to get the same structural authorization as you can see in PA20/PA30. You need to use the methods set_org_assignment and check_authorization for this purpose. For more information you can refer to include FP50PE21 from line 237 onwards till 270.
Regards
Ranganath

Similar Messages

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create transactoin code for a predefined variant?

Hi, I have created one variant for a custom report.How to create transaction code for the report with that variant?

When you create the transaction in SE93 select the Program and selection screen(Report transaction) type not
the transaction with variant(Variant transaction)

How to create plsql code for a snowflake cube

hi everybody!
do anyone know how to create plsql code for a snowflake tiype dimension to create
a cube?how to map the atributes, or if there are any exceptional atributes which I can use like in a temporal dimension?
thank you
waiting for any answer

The DBMS_AWM package provides stored procedures for creating an analytic workspace cube from a star schema. Is it posible to create a cube from a snoflake schema?

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

How to create t.code for report painter report created using CJE5

Hi All,
I'm trying to create T.code for a report painter program created using CJE5.
I using the D_SREPOVARI-REPORTTYPE as "RE" and
D_SREPOVARI-EXTDREPORT as KP 01RPSCO_X <report name>
If I provide spaces between KP 01RPSCO_X <report name>, its not allowing spaces.
If I didn't provide the space then its saying that "report does not exists"
Please let me know how to overcome this issue?.
What this KP & 01RPSCO_X stands for? Is this always constant?
There is a similar kind of transaction in other system which Looks like this " KP 01RPSCO_X <report name>" spaces in between
I dont understand why its not allowing spaces in this system. As its in different system i cant make a copy of this transaction and change the parameters.
Edited by: Mr A on Feb 18, 2010 5:28 PM
Edited by: Mr A on Feb 18, 2010 5:54 PM

thanks for giving me the link.
I searched for all these link in SDN before posting itself.
my issue is how to give the value for the parameater EXTDREPORT.
If i give spaces for the value KP 01RPSCO_X <report name>, its throwing error, T,code its self is inconsistent.
if i didnt give spaces its i'm able to create the t.code, but when i execute it, its giving error message saying "report does not exists"
but if i go to CJE5, that report is there.
thanks

How to create ABAP Query for vendor open items

HI,
My client has requested me to create ABAP Query for vendor open items . So that it will be usefull for the users . Could anyone help me with this. I will assign you points.Thanks in advance.

Hello,
Use Table BSIK <Open Items of AP > & BSAK <AP Cleared items>......
For Query you can use SQ01.
USE BSID & BSAD for AR open/clear items...
LFA1, LFB1 are vendor master data tables
This is FYI
Hope this helps.
Rgds
Rajendra

How to create t.code for a sap query

i have created a sap query.
user wants this as a t.code.
how to assign a t.code for teh sap query.
kindly explain me.

hi,
The other way of doing it.
1. Instead of creating your queries in SQ01, use SQVI. Create a query in your production system.
2. Now execute the query. When you have reached the selection screen, go to System > Status.
3. Copy the program name.
4. Now create a Z executable program in your development client. Put this one line of code in it:
submit program_name_copied_fr_production via selection-screen and return.
5. Create a TCode and assign the Z program to the TCode.
6. Transport the Z program and TCode over to Production system.
Hope this works for you, Do reward.

How to create process code for idoc bank_create01 in testing client

hi,
I am using Idoc BANK_CREATE01 and BANK_CHANGE01 to post idoc to R/3 in inbound side.
there is no standard process code available for this idoc
But there is a function module idoc_input_bank_create which posts data to r/3 from the idoc.
So i created a zprocess code and attached this function module to it.
But all this i have done in the development client , but it is not being reflected in the testing client
And i am not able to create Process code in we42 in testing client since it is not modifiable.
So , is transaction we42 client 42??
Or is there any way that whatver i create in dev client should also reflect in testing client
Please help
Regards,
Loveena

Hi,
While Creating the process code u have to save under transport ID under which id u have stored it,transfer that id into QA system then u can test ur IDOC.
If u have created it under local object then u have to agin store into one tranport id and then transfer it.
Regards,
Phani
Reward points if Helpful

How to create a code for that psoudo code or comment

For Each (Restriction Across Specific Sources (QIRK_71)){
 If (count (Source (QIRK_73))>0) AND Funds to restrict within selected sources (QIRK_74) = ‘All Funds’){
 //get the count of ALL Source (QIRK_73) within the loop, there can be multiple.
 // if rule is true display section below, else delete
I want a code in XML format for that Psedo code & comment.
I am a new user for BI publisher.help me urgent.

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create ABAP Proxy for SSL secured ABAP Service

Hi guys,
I try to set up transport security for my ABAP web service. The service should be called via a ABAP Proxy.
These are my steps to create the ABAP web service:
1. Create function module (se80)
2. Create web service (web service definition) (service wizard)
2.1 Authentication = STRONG
2.2 Transport Guarantee = BOTH
3. Activate service (wsconfig)
4. Control service (wsadmin)
Afterwards I tried to create the proxy but when I add the WSDL URI I always get an
HTTP error (return code 407, message "ICM_HTTP_SSL_ERROR")
I tried to find a "How to" but I was not successfull. Also the saphelp http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm was not helpful for me.
Hopfully you can help me! Every comment is appreciated!
Regards

I advise to have a look into the ICM trace file (dev_icm) - either by using ABAP transaction ST11 or SMICM.
There you should find error details. Most likely it's about the "chain verifier" complaining that he's unable to verify the certificate of the communication peer.
In that case [SAP Note 1094342|https://service.sap.com/sap/support/notes/1094342] might be helpful.

How To Create ABAP Code For HR Context Sensitive Structural Authorization

Similar Messages

Maybe you are looking for