How  to  create  adhoc  chain  in process chain

how  to  create  adhoc  chain  in process chain

hi,
ad hoc process chain is also the process cahin which will run seperatly from main chains.
as you do for process cahin create it also.
Process chain creation
http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Ramesh

Similar Messages

  • How to create info area for process chains?

    How to create info area for process chains?

    Hi,
    If I understand your question clearly, you want to assign display componets.
    once you have created you chain you assign the components by clicking CTRL+F11
    Regards,
    Namrata

  • How can we use meta chain in process chains

    hi friends,
      anyone tell me about meta chain in process chains and give me one example.
    thanks,
    sree
    Please search the forum
    Edited by: Pravender on Jun 28, 2010 8:04 PM

    Dear Suman,
    To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
    To create mails to Process chains:
    Right Click on the Process varient select the Create Message in the context menu.
    Select the type of mail i.e for successful, Error, Anyways.
    Then follow the screens.
    Note: The recipient type should be Via Internet.
    Hope this helps u.
    Regards,
    Kishore.Pulla

  • How do we convert an Event chains to Process chains?

    How do we convert an Event chains to Process chains?

    Hiii,
    u can try with the function module RSPC_MIGRATE_EVENT_CHAIN.
    Hope this helps u.
    Regards,
    Shiner.

  • How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???

    Hi BW Gurus,
    How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???and what are the
    measures i need to take care before doing the same .
    prasad

    Hi,
    Simply add these infopackage groups into process chain and schedule the process chain.
    Hope this helps.
    Assign points if useful.
    Regards,
    Venkat

  • How to identify whether that particular process chain is active or not?

    Hi all,
    How to identify whether that particular process chain is active or not ?
    thanxs
    haritha

    If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
    RSPCCHAIN
    RSPCCHAINT
    to check the logs
    RSPCLOGS               
    RSPCPROCESSLOG
    Give the chain name and check in the object version.
    Khaja

  • How to create parent and chile process in java

    i'm beginning in java, and i want to ask something, please help me...
    1. i want to ask how to create parent and child process in java???
    example :
    if have one window and explore menu, when i click the explore menu.
    new window come out.
    how if i close the parent window the child window will close too...
    2. what is the method from runtime class to get available memory and Active Threads count

    ONE way to do what you wanted is this.
    class Parent{
    Child c = new Child
    allChildren.add(c);
    //if close
    iterate through list
    (Child)allChildren.get(index).close();
    ArrayList allChildren;
    class Child{
    public void close(){ }
    i dont know if you can get the thread count. but you can
    get the current thread by using System.
    Memory: Runtime.freeMemory() .maxMemory() .totalMemory()
    http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Runtime.html
    Careful though you have to do a calculation to get the
    actual memory because those 3 methods refer to freeMemory
    of the CURRENT heap not the total memory.
    i think its: total - (max - free)

  • How to create Handling Unit using Process Order no. & Packing Instruction

    Hi experts,
    Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
    ANY FUNCTION MODULE OR BAPI TO DO THIS.
    if any solution please explain with proper example..
    Thanks In advance
    Thanks,
    Yogesh

    Hi experts,
    Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
    ANY FUNCTION MODULE OR BAPI TO DO THIS.
    if any solution please explain with proper example..
    Thanks In advance
    Thanks,
    Yogesh

  • How to create Adhoc Qurey.

    Hi Experts.
    Plz, forward me link or document were there is a detail description how to create Adhoc Qurey. Mean SQ03, SQ02, &SQ01.
    plz, do help.
    Regards,
    Venky.

    Go thru the below docs you will get to know about adhoc Query.
    AtomHR.com Knowledge Library Guide: Functional Areas and User Groups.<a href="http://www.sapconfig.com/menu_pages/Ad-HocQuery.htm">http://www.sapconfig.com/menu_pages/Ad-HocQuery.htm</a>

  • Creating cube index in process chain

    Hi,
    From my previous post I realized that we build index of cube first and then delete the overlapping request from cube.
    (http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm)
    If I design a process chain in which I delete the overlapping request first and then build index then in the checking view it does not give me any error.
    The process chain also works fine.
    How does it hurt to have it this way or what is the concept behind having the sequence as recommended by SAP.
    Thanks,
    sam

    Hi Sam,
      Writing performance is increased when there is no index --- So we delete the index before updating data.
    Reading Performance is increased when there is a index -- So we create Index so that when queries are executed quickly by reading the data in the info-cube.
    BI Best solutions suggests that old requests are to be deleted before loading new one.So we delete ovelapping requests.
    Hope it helps.

  • How to add Abap program in process chain to check the another process chain status and do accordingly

    Hello All,
    My requirement is related to process chain 1 . I have one process chain in that i have to  put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1  to further activity else wait to complete Process chain 2 .
    Here i have to use process chain 2 as a parameter.
    Kindly provide me solution .
    Regards
    Saurabh

    Hi Saurabh,
    You need to create ABAP program in which you check the values for required process chain in
    following table
    RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
    Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
    If you are not aware about how to write ABAP program then take help from ABAP Team.
    Regards,
    Ganesh Bothe

  • How to set delta load in process chain

    hello all
    The scenario is i created process chain for transaction data and all the infopackages are in initial load now I want to do delta,how to set delta in process chain,bcoz only the new records should load?
    kindly anyone let me know.
    regards
    balaji

    Hi Balaji,
    In most projects thay dont have the "init" infopackages in the process chain. They have 2 infopackages for a load - One for init and the other for delta. Now that you have created the process chain what I suggested was to change the infopackage settings to delta load and change the description of the infopackage.
    The other option would be to create a new infopackages for delta and include them in the chain replacing the "init" ones.
    Bye
    Dinesh

  • How to rollup cube data in Process chain?

    I have loaded data into a cube, and when i look at the technical status it is green but there is nothing in the "request for reporting available"box. I went to Rollup Tab and manually execute the request. It worked.
    But is there anyway that I can add a process type to do it automatically? I saw there are three process type related to Rollup, which one should I use?
    1. Initial Fill of New Aggregates
    2. Roll Up of Filled Aggregates/BIA Indexes (what does this mean?)
    3. initial Activation and Filling of BIA Indexes
    Thank you!

    Dear experts,
    We have the following problem: for certain figures we have on ODS level 2 daily updates: one at night and one at noon. During the week at noon we only load from the ODS into the Cubes only that data that is entered the same day (selection on CPU-Date in the InfoPackage). After loading the data at night we load the data which was entered the previous day (selection on CPU-Date in the InfoPackage). In this process we have a step in the process chain that deletes in the overlapping request of the previous day (which was loaded at noon).
    Our Process Chain for loading the data from ODS into the cubes looks as following:
    Delete Indexes of the cubes -> Load data from ODS into Cubes -> Generate Cube Indexes -> Delete overlapping Requests in InfoCubes
    After filling the BIA-Indexes on this cube, the process chain gives an error message at the stage where the overlapping request should be deleted.  The error messages says:
    Uncaught Exception: Keyfigure is of type Float.
    To solve this error at the moment we manually delete the BIA Indexes, delete the overlapping requests and fill the BIA Indexes again. Since the functions 'delete BIA Index' and 'Fill BIA Index' is not available in RSPC we can not do this automatically in the process chain.
    I also tried like above mentioned taking the step 'roll up filled BIA Indexes' into the process chain, but the check of the process chain creates a message stating that i cannot do this when in the same process chain the steps 'Delete Indexes of the Cube' and 'generate Indexes of the cubes' are included.
    Does anybody know a solution how i can delete overlapping requests in a process chain with filled BIA Indexes.
    Many thanks in advance for your kind reply.
    Best regards,
    Ilja Dekeyser

  • How to incorporate time in the Process chain messages

    Hi,
    I would like to create message after success or failure of process chain with time of failure in the subject.How to put system variable in the message subject?.
    Your help will be appreciated.
    thanks in advance.
    Manju

    raj,
    thanks for your quick reply but i would like to incorporate the finish time in the mail subject.
    for example mail subject is as follows.
    "GL process chain has been finished at xx:xx time".
    Here time (xx:xx) should automatically read and fill as per the finish time of the process chain.
    hope now it is clear.any idea how it can be done?.
    manju

  • Create Index fail in process chain

    Hi Friends,
    I have a process chain in production system which loads inventory data everyday at 6:00Am.
    2 days back R3 production system failed and the data is not loaded into BI.  It was stopped at Delete Index step. I have started again by selecting Repeat then it worked and the infopackage is also executed successfully.
    After that it is failed at Create index step and giving message " Job cancelled after system exception ERROR_MESSAGE". Till then it is giving same problem everyday.
    Could you guys help me how to solve this and execute the chain successfully.
    Thanks & Regards

    Hi,
    Try to create index for the cube manually i.e got info cube , Right Click -> manage->performance-> perform check index - if red do repair index, if it will not help then create index. After that run it though process chain
    Hope it will resolve your problem.
    Sangita

Maybe you are looking for