How to create an Access Point with Two MI424WR (GigE for Verizon FiOS) Routers?

I understand that these routers are fairly new and I cannot seem to find hardly any information on them.  I have a fairly large home and I just happen to have two MI424WR's Gig E routers.  One is my main and the other I would like to create into an Access Point.  Has anyone done this with these routers?  I have found plenty of previous information on previous routers similar to these, but I have yet to find any instructions on how to do this with these routers. 
Please help!
Mark
http://www.actiontec.com/products/product.php?pid=214

How are you going to connect them?  cat5 or coax?
cat5 instructions:
Can I use my wireless or an extra router along with the Verizon provided router?
coax instructions:
Can I get an ethernet connection in a room with only coax?

Similar Messages

  • How to create one soap interface with two soap action?

    Hi,
    I need to create one SOAP Interface with two or more webmethods (soap action), for example:
    Interface: MI_Outb_User
    Webmethods: createUser, searchUser, deleteUser.
    Can anybody helpe me?

    Hi Santos,
    I assume you will use one action at a time and depending upon certain condition you want to invoke the webservice and the corresponding action. If this is yes, then please check michaels reply in this thread:
    How can I handle serveral soap actions 
    or see stefans reply:
    Re: Is SOAP Adapter Action field can contain 2 or more "SOAP Actions"
    If this is not, then please ignore it.
    Regards,
    ---Satish

  • How to create a custom layout with two rows

    hi ,
       i have a requirement of creating the portal page layout with two rows. First row has one container with 100% width and second row has 3 columns (30:40:30).
    How to create the layout?
    what are the modification in portapp.xml?
    Thanks and regards,
    Saravanan

    Hi,
    Check this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/efa44d27a21a7de10000000a422035/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/efbac120711a71e10000000a422035/content.htm
    Here is example portalapp.xml:
    <?xml version="1.0" encoding="utf-8"?>
    <application>
      <!THIS FILE IS A COPY OF THE ORIGINAL VERSION STORED IN THE PCD. PLEASE DO NOT CHANGE IT!>
      <application-config>
        <property name="Vendor" value="sap.com"/>
        <property name="SecurityArea" value="NetWeaver.Portal"/>
        <property name="SharingReference" value="com.sap.portal.htmlb,com.sap.portal.useragent,com.sap.portal.pagebuilder"/>
      </application-config>
      <components>
        <component name="fullWidth">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="1 Column (Full Width)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying one full-width column"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="fullWidth.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConF"/>
            </property>
          </component-profile>
        </component>
        <component name="light_fullWidth">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 1 Column (Full Width)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying one full-width column"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_fullWidth.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConF"/>
            </property>
          </component-profile>
        </component>
        <component name="narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the left"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="narrowWide.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the left"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_narrowWide.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="wideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="wideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_wideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_wideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="equalWidths">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Equal Widths)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying two equal-width columns"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="equalWidths.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_equalWidths">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Equal Widths)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying two equal-width columns"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_equalWidths.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="narrowWideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="3 Columns (Narrow:Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Three columns displayed in a narrow:wide:narrow layout"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="narrowWideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConM"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont3" value="column3">
              <property name="plainDescription" value="Column 3"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_narrowWideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 3 Columns (Narrow:Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Three columns displayed in a narrow:wide:narrow layout"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_narrowWideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConM"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont3" value="column3">
              <property name="plainDescription" value="Column 3"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
      </components>
      <services/>
    </application>
    Greetings,
    Praveen Gudapati

  • How to  create a selection screen with two tab strips

    Hi Experts,
    I need to craete a selection screen '100' with two tab strips, in the 1st tab strip i need create some select options as subscreen and in other tabstrip i need to call the subscren '4000' of the program 'SAPLCTMS' . i need to call this screen as selection screen from the zprogram. please help me out.
    Thanks in advance...
    Sarath...J

    Hi,
    I have developed some code.
    It just displays a table control and after entering the values init, upon hitting the return button, the values will be put into table itab. Have a look and make necessary changes as you see fit.
    *& Report  ZMADHU_TBCNTL
    REPORT  zmadhu_tbcntl.
    DATA: BEGIN OF itab OCCURS 0,
         sel TYPE s_flag,
         matnr TYPE matnr,
         ersda TYPE ersda,
         ernam TYPE ernam,
      END OF itab.
    CONTROLS: tab_cntl TYPE TABLEVIEW USING SCREEN 100.
    *START-OF-SELECTION.
    CALL SCREEN 100.
    *END-OF-SELECTION.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'TABCNTL'.   "pf status
    SET TITLEBAR 'xxx'.
      CASE sy-ucomm.
        WHEN 'BACK' OR
             'CANCEL' OR
             'EXIT'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  ITAB_MODIFY  INPUT
          text
    MODULE itab_modify INPUT.
      CASE sy-ucomm .
        WHEN ' '.        " When pressed enter
    if itab-sel = 'X'.
          MODIFY itab INDEX tab_cntl-current_line.
          APPEND itab.    " append lines to internal table
          CLEAR itab.
    *endif.
      ENDCASE.
    ENDMODULE.                 " ITAB_MODIFY  INPUT
    *Screen 100 flow logic.
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      LOOP AT itab WITH CONTROL tab_cntl CURSOR
      tab_cntl-current_line..
      ENDLOOP.
    PROCESS AFTER INPUT.
      MODULE select_data.
      LOOP .
        CHAIN.
          FIELD itab-matnr.
          FIELD itab-ersda.
          FIELD itab-ernam.
          MODULE itab_modify ON CHAIN-REQUEST.
        ENDCHAIN.
      ENDLOOP.
    MODULE USER_COMMAND_0100.
    Hope it will helps to u.
    Thanks,
    Shankar

  • How to create a mount point with PowerShell

    Hello,
    Can you please point me to a sample which creates a mount point using powershell?

    Try this. I cooked it up by consolidating a few different sources.  I posted it on the microsoft connect suggestion for native support, under workarounds:
    https://connect.microsoft.com/PowerShell/feedback/details/627099/need-powershell-equivalent-to-cmds-mklink
    #symlinks.ps1
    # First add a type so it stays available for this instance
    Add-Type -TypeDefinition @'
    using System;
    using System.Runtime.InteropServices;
    namespace mklink
    public class symlink
    [DllImport("kernel32.dll")]
    public static extern bool CreateSymbolicLink(string lpSymlinkFileName, string lpTargetFileName, int dwFlags);
    [DllImport("kernel32.dll")]
    public static extern bool RemoveDirectory(string lpPathName);
    [DllImport("kernel32.dll")]
    public static extern uint GetLastError();
    Function New-ReparsePoint() {
    <#
    .SYNOPSIS
    Creates a reparse point to the specified target.
    .DESCRIPTION
    Creates a reparse point to the specified target.
    .PARAMETER Path
    Path to the reparse point to remove.
    .NOTES
    Author: Jordan Mills
    Version: 1.0
    .EXAMPLE
    Remove-SymbolicLink -Path "E:\directory\mount"
    #>
    [cmdletbinding(DefaultParameterSetName="default")]
    Param (
    [parameter(
    ParameterSetName="default",
    Position=0,
    Mandatory=$true,
    ValueFromPipeLine=$True,
    ValueFromPipelineByPropertyName=$True
    [parameter(
    ParameterSetName="file",
    Position=0,
    Mandatory=$true,
    ValueFromPipeLine=$True,
    ValueFromPipelineByPropertyName=$True
    [parameter(
    ParameterSetName="directory",
    Position=0,
    Mandatory=$true,
    ValueFromPipeLine=$True,
    ValueFromPipelineByPropertyName=$True
    [Alias("Path","FileName","Directory")]
    [string[]]$Name,
    [parameter(
    ParameterSetName="default",
    Position=1,
    Mandatory=$true,
    ValueFromPipelineByPropertyName=$True
    [parameter(
    ParameterSetName="file",
    Position=1,
    Mandatory=$true,
    ValueFromPipelineByPropertyName=$True
    [parameter(
    ParameterSetName="directory",
    Position=1,
    Mandatory=$true,
    ValueFromPipelineByPropertyName=$True
    [string]$TargetPath,
    [parameter(
    ParameterSetName="file",
    Position=2,
    Mandatory=$false,
    ValueFromPipelineByPropertyName=$True
    [switch]$IsFile,
    [parameter(
    ParameterSetName="directory",
    Position=2,
    Mandatory=$false,
    ValueFromPipelineByPropertyName=$True
    [switch]$IsDirectory
    If ($IsFile -or $IsDirectory) {
    If($IsFile) {
    $result = [mklink.symlink]::CreateSymbolicLink($Name,$TargetPath,0)
    Else {
    If($IsDirectory) {
    $result = [mklink.symlink]::CreateSymbolicLink($Name,$TargetPath,1)
    Else {
    Write-Error -Message "Conflicting path type parameters. This should not happen."
    Break;
    Else {
    If (Test-Path -LiteralPath $TargetPath -PathType Leaf -ErrorAction SilentlyContinue) {
    $result = [mklink.symlink]::CreateSymbolicLink($Name,$TargetPath,0)
    Else {
    If (Test-Path -LiteralPath $TargetPath -PathType Container -ErrorAction SilentlyContinue) {
    $result = [mklink.symlink]::CreateSymbolicLink($Name,$TargetPath,1)
    Else {
    Write-Error -Message "Unable to determine path type of TargetPath. Use -IsFile or -IsDirectory."
    Break;
    If ($result) {
    Get-Item $Name
    } Else {
    Write-Error -Message "Error creating symbolic link" -Category WriteError #-ErrorId $([mklink.symlink]::GetLastError())
    Function Remove-ReparsePoint {
    <#
    .SYNOPSIS
    Removes a file or directory that is a reparse point (symlink or hardlink) without removing all child objects.
    .DESCRIPTION
    Removes a file or directory that is a reparse point (symlink or hardlink) without removing all child objects.
    .PARAMETER Path
    Path to the reparse point to remove.
    .NOTES
    Author: Jordan Mills
    Version: 1.0
    .EXAMPLE
    Remove-SymbolicLink -Path "E:\directory\mount"
    #>
    [cmdletbinding()]
    Param (
    [parameter(
    Position=0,
    Mandatory=$true,
    ValueFromPipeLine=$True,
    ValueFromPipelineByPropertyName=$True
    [Alias("FullName","Name","FileName","Directory")]
    [ValidateScript({Test-Path $_})]
    [string[]]$Path
    $Path |
    Get-Item |
    ForEach-Object {
    $Item = $_;
    Switch ($Item.Attributes -band ([IO.FileAttributes]::ReparsePoint -bor [IO.FileAttributes]::Directory)) {
    ([IO.FileAttributes]::ReparsePoint -bor [IO.FileAttributes]::Directory) {
    # Is reparse directory / symlink
    If ($whatif) {
    Write-Host "What if: Performing the operation `"Delete Directory`" on target `"$($_.FullName)`""
    } Else {
    [System.IO.Directory]::Delete($Item.FullName);
    Break;
    ([IO.FileAttributes]::ReparsePoint -bor 0) {
    # Is reparse file / hardlink
    If ($whatif) {
    Write-Host "What if: Performing the operation `"Delete File`" on target `"$($_.FullName)`""
    } Else {
    [System.IO.File]::Delete($Item.FullName);
    Break;
    default {
    Write-Error "$Item is not a reparse point."

  • How to create and access cookie with in iView ?

    Hi,
    I have created iViews using .Net PDK for SAP.
    Is it possible to create a cookie using code of iView and use this cookie to access an external application.
    Regards,
    Vikas Khandpur

    U cud add this code to the java iview:
    setting a cookie:
    Cookie fCooky = new Cookie("flag","false");
    response.addCookie(fCooky);
    fCooky.setPath("/");
    Reading the cookie:
    Cookie[] cook = request.getServletRequest().getCookies();
    for (int i = 0; i < cook.length; i++){
    Cookie cc = cook<i>;
    if(cc.getName().equals("flag")){
       response.write(cc.getValue()toString());
    Iam not sure how u wud do it in a .NET Iview.
    Sry!
    Regards,
    P.

  • How to create a vi project with two ao channel and multi ai channel by customer/producer mode

    I'm a ni elvis ii user.
    i want to create one vi which include 2 AO channel output FGEN and multi AI channel acquisition signal，
    and i wish use cunstomer/producer mode to realize this vi。
    here is the vi，run this vi seveal secends，then pop-up with “完成该操作内存不足”
    anyone can help me？
    thx
    Attachments:
    demo.vi ‏191 KB

    Hi steve ,
    Sorry to say that you cannot configure and acquire from AI channels on a   Device simultaineously from 2 seperate VI's.
    regards
    Dev

  • How to create a Dialog Box with two buttons (Acept and Cancel)?

    Hi i am devoloping an application (an applet) that has to throw a Dialog box, if i click on the Acept button makes some thing and if i click on the Cancel button the it makes other things.
    how could i throw this dialog message...?
    Thanks.

    The following would be the code needed for your dialog box:
         JDialog dialog = new JDialog();
         dialog.setModal(true);
         //the following window listener to the dialog box is optional
         dialog.addWindowListener(new WindowAdapter(){
              public void windowClosing(WindowEvent e){
                  System.exit(0);
              }//method
         JButton acceptButton = new JButton("Accept");
         JButton cancelButton = new JButton("Cancel");
         acceptButton.addActionListener(new ActionListener(){
              public void actionPerformed(ActionEvent e){
                  //do what you need to do
              }//method
         cancelButton.addActionListener(new ActionListener(){
              public void actionPerformed(ActionEvent e){
                  //do what you need to do
              }//mehthod
         Container cont = dialog.getContentPane();
         cont.setLayout(new BorderLayout());
         cont.add("West",acceptButton);
         cont.add("East",cancelButton);
         dialog.pack();
         dialog.setVisible(true); I hope this would be useful
    Rizwan

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • Is there any way I can control which specific access point I connect (and stay connected) to from amongst a set of access points with the same SSID?

    I'm working from a boat in a harbor in which the ISP has deployed numerous access points around the periphery.  All the access points share the same SSID and each is configured to use either channel 1, 6 or 11.   From my location, there are over a dozen of these access points "visible" (based on the the output of WiFi Scanner) with a range of RSSI and S/N values that vary over time.
    The ISP has told me that the quality of my connection should be "perfectly fine" for any access point with an RSSI value better than -75, but I know from experience that my connection quality is miserable (i.e. < 50Kbps download) for almost all of these, including those with RSSI values better than -75.  There is at least one exception, however, which gives me on the order of 2Mbps download, which is "great" in this context.
    I've tried using a more powerful USB antenna plugged into my MacBook Air (mid 2011), but as far as I can tell, it really doesn't make much difference.  Neither does my location within the boat.   The overriding factor seems to be which access point I happen to connect up to.
    I should point out that the closest access points are about 75 yards away, with many of them being several hundred yards away or more.  I'm guessing that even though the signal strength of some of the distant access points is causing them to get "chosen" some times, the results are unacceptable due to the distance.
    I'm hoping that I can determine, through experimentation, which access point(s) provide(s) acceptable performance and then configure my Mac to limit my connection to those points through whatever mechanism I need to use (e.g. channel, MAC id, etc.).

    Establishing a wireless connection with a client computer is left to the access point for various reasons. One reason that your Mac may not connect to the strongest access point is that it may have reached a limit of the number of clients it can serve, leaving it unable to accept a connection with another. The limit may not be very large.
    Suppose that happens, and your Mac establishes a connection with a more distant access point having a weaker signal. Then, suppose a client drops off the network. Doesn't this mean your Mac will switch to the stronger access point? Not necessarily. The throughput delivered to and from your Mac would have to drop below a threshold specified in the AP for it to drop the client, leaving your Mac free to connect with another one. The reason for this is to prevent rapid switching from one AP to another in an area in which two signals are of approximately equal quality. If that were to occur the frequent and repetitive handshaking between the two devices would slow throughput to zero.
    In an environment in which several access points are broadcasting the same SSID, Apple provides no insight as to how it determines which access point to choose. This is the reason I suspect this "choice" is a function of the router, or access point. The connection originates with it, not the Mac.
    Now, what would solve your dilemma would be to determine a way to control the access point with which your Mac connects, by specifying the access point's unique MAC address for example. In this happy circumstance, you could maintain an editable "whitelist" or "blacklist" of the harbor's access points and be able to choose which among them you prefer.
    I do not believe OS X maintains such a record of MAC addresses though, only those of the routers it uses. If I am correct about that, such a solution is unlikely to exist. Don't let that discourage you from searching for one though... I would concentrate on something like "selecting access point by specific MAC address".
    I did find this patent application though:
    Roaming Network Stations Using A Mac Address Identifier To Select New Access Point
    Perhaps it's a start

  • How to delete wifi access point on E7 - mails won'...

    I have E7 with symbian anna. A while ago I had to restart my home wifi (due to storm) and during that process a new wifi access point (wlan(01) was created on my phone. After that - as far as I have now understood - my phone stopped syncronising gmails altogether. Also in my provider's network (outside wifi, elisa). In order for my phone to sync emails, i need to reboot it (or just turn it off and on, no need to get the three vibrations when turning off).
    Question 1) How do I delete this unncecssary wifi access point on E7? I was able to do it easily on my N900 but not on this E7.
    Question 2) Is it likely that the reason my phone stopped syncin gmails is related to this wifi issue? Pressing send & receive won't help, either, nothing happens. I have had this E7 for 1.5 months now, Symbian Anna I've had for 10 days and this problem started 5 days ago. Before that the mails flew in very nicely.

    To remove access poit, go to settings>connectivity>settings>Destination>Internet>long hold access point and select delete.
    For Gmail, don't use it, but if you remove/delete mailbox and then set it up again it should work fine, also heard that during set up if you reject terms and conditions and set up manually it works better ?
    http://asimag.wordpress.com/2007/06/22/how-to-configure-gmail-account-on-your-n95n73/
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • How to create a Access list on core switch to bloxk all Internet Traffic & allow some specific Internet Traffic

    Hellp Everyone,
    I am trying to create a Access-List on my Core Switch, in which I want to allow few internet website & block the rest of them.
    I want to allow the whole Intranet but few intranet websites also needs access to the internet.
    Can we create such Access-List with the above requirement.
    I tried to create the ACL on the switch but it blocks the whole internet access.
    i want to do it for a subnet not for a specific IP.
    Can someone help me in creating such access list.
    Thanks in Advance

    The exact syntax depends on your subnets and how they connect to the Internet. If you can share a simple diagram that would be much more informative.
    In general just remember that access-lists are parsed from the top down and as soon as a match is found, the processing stops. So you put the most specific rules at the top. also, once you add an access-list, there is an implicit "deny any any" at the end.
    The best approach is to create some network object-groups and then refer to them in your access list. From your description, that would be something like three object-groups - one for the Intranet (Intranet), one for the allowed servers that can use Internet (allowed_servers), and a third for the permitted Internet sites (allowed_sites).
    You would then use them as follows:
    ip access-list extended main_acl
    permit any object-group intranet any
    permit object-group allowed_servers object-group allowed_sites any
    interface vlan
    ip access-group main_acl in
    More details on the syntax and examples can be found here:
    http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/15-2mt/sec-object-group-acl.html#GUID-BE5C124C-CCE0-423A-B147-96C33FA18C66

  • How to create a Sales order with ref to Contract using Function Module

    How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

    We have a unique situation where we like change the sold-to customer of the sales order
    once order has been created. These orders have been created using either by function module
    BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
    These two processes work abosolutely fine except someone might have change the sold-to
    customer of the ship-to customer of the original sales order. If this the case then the new
    sales order will be created with the old sold-to and with not the new sold-to.
    We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
    the returned parameteres of the BAPIs and they are all successful but sold-to remains the
    same old one.
    Any help would be much more appreciated.

  • How to create a pdf file with CS5

    Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts.  Can someone please help me with this ?  The "help" button in CS5 doesn't seem to cover this question.  Nor do the FAQs.
    Thank you very much.

    Save As... Photoshop PDF.

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

Maybe you are looking for

  • How do I import music files from a flash drive to my iTunes library on my laptop

    How can I import music files from a flash drive to my iTunes library? I put the flash drive into my laptop, selected " add file to library", selected the songs I wanted from the flash drive, and it looked like they were added as the names show under

  • Is there any way to create an apple id for a minor child without a credit card

    I only have debit cards.  I have three VISA debit cards with CVVs but they are all linked to bank accounts.  I don't have credit cards because I don't want the debt or interest rates associated with them.  I have several apple devices at my house for

  • Looking up an EJB – best practices

    Hi, what's the correct way to specify an EJB when attempting to get the home interface? Using WebLogic, it seems people just specify the JNDI name and it seems to work fine. Object ref = context.lookup("testsession"); But other times I see this synta

  • Connect App-V 5.0 Add-in package

    Hi Everyone, I have sequenced an Excel Add-in application for MS Office using App-V 5.0. Then I have published it on the client machine successfully. If I launch the Excel shortcut which is installed locally, the excel add-in is not getting loading.

  • Help me find the IP adress of my Canon MX870

    Hello, how can i find the IP adress of my Canon MX870? Solved! Go to Solution.