How to create an anonymous Distribution List ?

Hi,
I have a growing distribution address list created in the Address Book. When I send that address list from Mail, all the names appear individually and everybody can see everybody's else email.
How to make it look like it comes just from me, or my distribution list name, and not make appear all the other emails?
Thanks,
JP.

Hi,
Simple enough and seems to work
Thanks!
JP.

Similar Messages

  • How to create Exchange dynamic distribution list using multivalue extension custom attribute

    I am trying to create a dynamic distribution list using an ExtensionCustomAttribute.  I am in hybrid mode with Exchange 2013.  The syntax I have is this: 
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')} 
    This works correctly on-prem.  But hosted always results in an empty list.  I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
    If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.  
    If anyone has any suggestions I would appreciate it.

    I don't think I provided enough information about the problem.  Let me add some and see if it makes sense.
    I have an Exchange 2013 on-premise configured in hybrid mode with Office365.  For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud.  Each of them has CustomAttribute6 = 'Y'
    and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
    Using on-prem Exchange powershell, I run the following command:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them as follows:
    $DDG = Get-DynamicDistributionGroup DG_NH
    Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
    So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    Replaying the query above, I can see this also works fine and finds my two users.
    Next I open a new powershell and connect to Office 365 and repeat the process there.
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them.
    And then delete the group and recreate it using the multi-value attribute:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    When I run the query this time it produces no result.  Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud.  If I use single valued attribute, it works fine.
    I really need to be able to get multi-valued DDG's working in the cloud.  If anyone has done this and has any suggestions, I would appreciate seeing what you did.  And if this is the wrong forum to port this, if you can point me to a more suitable
    forum I will report there.
    Thanks,
    Richard

  • How to create an email distribution list?

    How do you create an email distribution list

    This is what I do and it works!
    1.  Create a new contact in iCloud (iCloud.com) or from your iPhone or iPad.
    2.  The company name field is your distribution name.
    3.   In one email field type in or paste in all the email addresses you want in the format as listed below. That's open double quotes follow by person's name close double quotes. Open greater than sign e-mail close greater then sign.  Each additional entry follow by a comma.  Last entry you don't need to.
             "first lastName"<[email protected]>,
    I would suggest do this in Note (on the iPad) or somewhere you can see your entres. Then paste them to the email field.
    Good luck!  Hope this helps.
    Tuan
    Long Beach CA

  • How to add an SAP distribution list to transport?

    Hi All,
    I have created a shared distribution list in SAP using SO15. Can anyone suggest me how to add this list to a transport? or I need to create this in each environment.
    Please suggest on this issue.
    Thanks in advance
    Prady

    What does that mean? So I have to create it in each environment(i.e. Development/Quality/Production) explicitly. By no means I can transport this list then?
    Thanks for your quick response.
    With regards
    Prady

  • How to create a group mailing list in JavaMail?

    Hello,
    I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
    That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
    Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
    Thanks in advance!

    Hi:
    I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
    Best regards,
    Fabio Galarraga.

  • How to create a group contact list on iphone4?

    how to create a group contact list on iphone4?

    You can create your groups on your computer and sync them on your iPhone. Or you can use an application. I developped Easy Group, to manage group of contacts, and send group texts and group emails.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How to create a group mailing list?

    how to create agroup mailing list?

    i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column.   this is after i created a new group under address book, & then drug over individual names into the group.   what am i doing wrong?

  • How to create more than 21 lists in interactive reports

    hello everyone,
    I am new to ABAP as well as this site. Kindly help, I want to know how to create more than 21 lists in interactive reports.
    Also, how can i create them without using WHEN 1, wHEN 2 and so on...
    Kindly help.
    thank you

    Hello,
    Using Intracive Reports its not possible to cretate more than 21 lists.
    But its possible to create more than 21 using ALV concept.
    for sample ALV u can serch in SDN.
    Regards,
    Anil.

  • Access - How to create Mail Address only list?

    Printing envelopes from mail lists - via Microsoft Excel? Access - How to create Mail Address Only list?
    Bearing my "new boy" status, step by step instruction would be appreciated.

    Hi
    This is a question only about the Microsoft products and has nothing to do with Toshiba notebooks but I have investigated a little bit in the net and found this useful sites:
    http://support.microsoft.com/kb/q141991/
    https://www.nahu.org/member/using%20excel%20to%20create%20lists%20and%20labels .pdf

  • How to create 2/3 dropdown lists

    How to create 2/3 dropdown lists that are linked.  The first one answered drives the answer for the second or thrid dropdown box.
    Also can I wrap text in a dropdown list?
    Thanks in advance.

    This is the scripting I tried to use  in the first dropdown list and it doesn't work, any HELP would be appreciated.
    form1.#subform[0].DropDownList1::exit - (JavaScript, client)
    if(this.rawValue=="a")
    DropDownList2a.presence = "visible";
    DropDownList2b.presence = "hidden";
    DropDownList2c.presence = "hidden";
    else if (this.rawValue == "b")
    DropDownList2a.presence = "hidden";
    DropDownList2b.presence = "visible";
    DropDownList2c.presence = "hidden";
    else if (this.rawValue == "c")
    DropDownList2a.presence = "hidden";
    DropDownList2b.presence = "hidden";
    DropDownList2c.presence = "visible";
    Thanks in advance

  • How to create a Unique Member List for PlugAccounts ?

    Hello everybody,
    Does anyone knows or did it in the past how to create a Unique Member List for Plug Accts? If anyone does could you please paste some scripting for reference?
    Thank you very much, JB

                             Dim arrPlugs(100)
                             j = 1     
                                       Plug_Acct_List = HS.Account.List("","")
                                       For Plug_Acct_loop = LBound(Plug_Acct_List) To UBound(Plug_Acct_List)
                                  If Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop)) &lt;&gt; "" then
                                       strPlug = Hs.Account.PlugAcct(Plug_Acct_List(Plug_Acct_Loop))
                                       blnFound = False
                                       For i = LBound(arrPlugs) to UBound(arrPlugs)
                                            If arrPlugs(i) = strPlug then blnFound = True
                                       Next
                                       If blnFound = False then
                                            HS.AddMemberToList strPlug
                                            arrPlugs(j) = strPlug
                                            j = j + 1
                                       End If
                                  End If
                             Next

  • How to create GOS view attachment list in ECC6

    Hi,
    I created Z transaction. I have to create View attachment List to this transaction. How to create GOS view attachment list in ECC6. can anybody send sample code on this.
    Thanks in advance.
    Zakir.

    Hi all,
    I've following problem with class CL_GOS_ATTACHMENTS.
    Transaction IE01/02/03 (create/change/display equipment) starts and instantiate GOS manager, and related BAdI are called.
    Then, when I choose one of available service, CL_GOS_ATTACHMENTS is instantiated, and inside that class a new GOS manager is instantiated, inspite of already existing instance.
    As a result, related BAdI are called twice, but unfortunately second time some SY variables are not correctly filled, particularly SY-TCODE and SY-MODNO are both empty.
    I've develop a workaround so that when sy-tcode is filled I save it somwhere, and when it's empty I filled it from saved value, does anyone know any other solution??
    Many thanks
    Regards
    m@x

  • How do I email a distribution list in Entourage?

    I would like to share some of my distribution lists with friends.
    How can I email the distribution list? I can't drag a group icon into the mail message like in Outlook.
    Any help is appreciated.
    Jeremy

    Thanks. I was hoping to find something other than Groups, because when you sync with a mobile device, it maps the groups to Categories in the device. This adds a lot of complexity to data and many mobile devices have some limitations on categories.
    But thanks for the quick response!
    -MJSTEELEGA

  • How to send mail to distribution list and another table list

    Hi
    I am facing a problem. I need to send mail to the user who is creating the SO/PO and a distribution list.
    Problem is only one thing can be used at the same time. ie either Distribution list or list from internal table.
    How can we use both in 1 function module. Like it should call the internal table and then the distribution list for sending the mail .
    Regards,
    Varun

    Hi,
    Refer to following link,
    http://www.sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
    http://www.sap-img.com/fu016.htm
    Reward pts. if helpfull.
    Regards,
    Dhan

  • How does everyone manage Email Distribution Lists in E-Business Suite

    We have heaps of email distribution lists stored in Oracle Ebusiness Suite, excel, access ..you name it!
    I would like to use a standard method for tagging contacts in the CRM Sales and Marketing Online so our employees can run reports to create external mailing lists.
    Today we use classification codes to do this. Have also thought about using a descriptive flex field and report on that to create a contact list with name and email addresses.
    Anybody have a better idea for how to achieve this in Oracle Marketing/Sales Online?
    Ideally, we would like to create a customer facing website so people could subscribe/unsubscribe from email lists and have it fully integrated 'plugged in' to the above solution.

    Thanks Ravi for your response.
    No, no such kind of reasons.
    Indeed I can send successfully to a simple email address but not to the distribution list ...
    The problem is right there, in the fact that there is a ditribution list but I really don't know what's the problem ...
    Have you ever use a distribution list? Any special thing to do with it?
    A'll appreciate any help.
    Regards

Maybe you are looking for