How to create an appraisal but with NOTES???

Hello,
I use FM RHPA_APPRAISAL_CREATE and it is ok.
But I need to attach notes to particular grades as well.
Any idea?
Thanks,
Piotr

I havent used this FM , but if you execute the program "RPIT25APPF01" and see what exactly its doing .
It is useful please give me reward points.
Thanks
Murali

Similar Messages

How to create a popup but with no image

Hi,
I have seen this book on the ibook store (done with iauthor) - Renewable Energy Sources - this is what they did -
plain text and some of the words are painted in blue. Touching a painted word (not an image) brings up a pop up in the location.
It is not a widget.
It is not keynote.
Pure popup - as if it's hyperlinked but without the underline.
Please help
Thank you

Hi there.
I have the same question.
Have you thought of the possibility of using the glossary function?

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

How to create item wise invoice with reference to sales order.

Hi ,
Please let me know how to create item wise invoice with reference to sales order.
Ex : Sales order has 2 line items .
When creating invoice system should create two invoices for each line items.
I have tried with copy control but I am not able to do it.
Please advise.
Regards

Hi,
Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
As per my understanding it should not be fixed and in that case it should like as follows,
In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
and select desire line item to be billed and click on copy and will take you to billing screen.
Regards,
Ajit K Singh

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

How to create a navigation bar with custom made buttons?

I'm used to work with a similar program as Muse. In there we can create a single button and link them together into a navigation bar. I have tried all sorts of tutorials but none of them is discussing this possibility.
To summorize. The idea is to create a button in photoshop and to use this as a theme to build a navigation bar. Possible or not and how? Thanks for assistance. Rgds Rufin

Hi Brad,
Thanks for your reply.
No, not really. I used to work with XARA up till now. And being an Adobe Cloud user I think it a bit silly using two different systems. In XARA I can create a custom button and turn them into a navbar. For your information I include a few links to sites I created with Xara and I would like to know if I can create the same type of navbars with Abobe Muse. I already found out that all the other functions are available and some work a lot better in Muse, but I’m stuck on the navbar issue. I know I can create a button in Adobe PS and use it in Muse. But I didn’t manage to figure out how to create a navbar in Muse on basis of a button created in PS.
www.restaurant-cedric.be or www.discoamigo.com or www.radioparadijs.be
Grtz,
Rufin
LOGO-RUFIN'S-REISBUREAU-outlook
Koningslaan 36 – b31
8300 Knokke – Heist
Tel: 050621052
Fax: 050621072
e-mail: <mailto:[email protected]> [email protected]
<http://www.rufins.be/> http://www.rufins.be
<http://www.travelcoop.be/> travelcoop_logo_2013[1] <http://ferventreisagent.be/rufins-reisbureau> klein logo
Van: Brad Lawryk
Verzonden: zondag 12 oktober 2014 19:40
Aan: RUFIN DUWEL
Onderwerp: How to create a navigation bar with custom made buttons?
How to create a navigation bar with custom made buttons?
created by Brad Lawryk <https://forums.adobe.com/people/Brad+Lawryk> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/6817739#6817739>

How to create a test plan with specific transactions (or program)

Hello,
I'm a new user in Sol Man !
How to create a test plan with specific transactions (or program).
In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
In my test plan (STWB_2) those specific doesn't appear to be selected !
Thanks in advance.
Georges HUYNEN

Hi
In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
Also visit my weblog
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
please reward points.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create an object only if not exist?

how to create an object only if not exist? is it possible?
if not what can I do?
Thanks.

Well, the jsp:useBean tag is a great way to do things.
But another way is:
<%
      MyObjectType myObject = null;
      if(session.getAttribute("myObject"))==null) {
         myObject = ... ; //initiate your object
         session.setAttribute("myObject", myObject);
      myObject = (MyObjectType) session.getAttribute("myObject");
%>As you can see, this is more messy, but you can do it.

Re: How to create More two class with one object

haii,
         i have small information How to create More two class with one object,
bye
bye
babu

Hello
I assume you want to create multiple instance of your class.
Assuming that you class is NOT a singleton then simply repeat the CREATE OBJECT statement as many times as you need.
TYPES: begin of ty_s_class.
TYPES: instance   TYPE REF TO zcl_myclass.
TYPES: end of ty_s_class.
DATA:
lt_itab      TYPE STANDARD TABLE OF ty_s_class
                 WITH DEFAULT KEY,
ls_record TYPE ty_s_class.
DO 10 TIMES.
    CLEAR: ls_record-instance.
    CREATE OBJECT ls_record-instance.
    APPEND ls_record TO lt_itab.
ENDDO.
Regards
Uwe

Hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

How to create a Dynamic Datatable with sorting functioanlity

Hi,
I am new to JSF and need some help can some one please tell me how to create a dynamic datatable with sorting functionality. I am reading data data from a database table and wants to build the datatable dynamically based on the columns returned. I know how to created a datatble with a fixed number of columns but can't figure out how to create a datatable dynamically with sort functionality. Any small example will help.
Thanks

Hi,
Here is what I have so far and can't figure out how to add the sorting functionality. Any help is appreciated.
Managed Bean:
private List<MyDto> data ;
    public HtmlDataTable getDataTableOne ()
        if ( dataTableOne == null )
            populateCheckBoxes () ; // Preload.
            populateDynamicDataTableOne () ;
        return dataTableOne ;
    public void populateCheckBoxes ()
        data = new ArrayList<MyDto> () ;
        MyDto myDto1 = new MyDto () ;
        MyDto myDto2 = new MyDto () ;
        MyDto myDto3 = new MyDto () ;
        MyDto myDto4 = new MyDto () ;
        myDto1.setChecked ( true ) ;
        myDto1.setValue ( "myDto1" ) ;
        myDto2.setChecked ( false ) ;
        myDto2.setValue ( "myDto2" ) ;
        myDto3.setChecked ( false ) ;
        myDto3.setValue ( "myDto3" ) ;
        myDto4.setChecked ( true ) ;
        myDto4.setValue ( "myDto4" ) ;
        data.add ( myDto1 ) ;
        data.add ( myDto2 ) ;
        data.add ( myDto3 ) ;
        data.add ( myDto4 ) ;
    public void populateDynamicDataTableOne ()
        dataTableOne = new HtmlDataTable () ;
        UIOutput header = new UIOutput () ;
        header.setValue ( "" ) ;
        UIColumn tableColumn ;
        tableColumn = new UIColumn () ;
        HtmlOutputText textHeader = new HtmlOutputText () ;
        textHeader.setValue ( "" ) ;
        tableColumn.setHeader ( textHeader ) ;
        HtmlSelectBooleanCheckbox tCheckBox = new HtmlSelectBooleanCheckbox () ;
        tCheckBox.setValueBinding ( "value" , FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.checked}" ) ) ;
        tableColumn.getChildren ().add ( tCheckBox ) ;
        // Set output.
        UIOutput output = new UIOutput () ;
        ValueBinding myItem = FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.value}" ) ;
        output.setValueBinding ( "value" , myItem ) ;
        // Set header (optional).
        UIOutput header2 = new UIOutput () ;
        header2.setValue ( "" ) ;
        UIColumn column = new UIColumn () ;
        column.setHeader ( header2 ) ;
        column.getChildren ().add ( output ) ;
        dataTableOne.getChildren ().add ( tableColumn ) ;
        dataTableOne.getChildren ().add ( column ) ;
MyDto.java
public class MyDto
    private Boolean checked;
    private String value;
    public MyDto ()
    public void setChecked ( Boolean checked )
        this.checked = checked;
    public Boolean getChecked ()
        return checked ;
    public void setValue ( String value )
        this.value = value;
    public String getValue ()
        return value ;
JSP
<h:dataTable id="table" value="#{myRequestBean.data}" binding="#{myRequestBean.dataTableOne}" var="row" />Thanks

How to create an appraisal but with NOTES???

Similar Messages

Maybe you are looking for