How to create an array in if/else or case structure without 0's ?

Hello,
I've been trying to do this for a while now.
I only managed to think of this in three ways:
1. (What I'm doing right now Create the array by going through a for loop, which populates the array by auto indexing. It populates with correct number if true and with a '0' if false. The idea was to delete the 0's later on in the code. This however seems highly ineffective.
2. Make use of a shift register, which automatically adds the correct number to an array. The problem is that the array will keep growing and growing and at the very least would tremendously slow down my program. At worst, it would crash.
So, my question is: How do I create an array that if a comparison is true, it puts the element in and if not it does nothing ?
I've attached a PNG snippet of my code.
Kind Regards,
David.
Solved!
Go to Solution.
Attachments:
Get_Indices.png ‏24 KB

Pladio wrote:
I've been trying to do this for a while now.
You did not explain what "this" is. Can you give some typical inputs and expected outputs? Populate your controls and indicators with typical data and make it the default efore attaching.
Pladio wrote:
So, my question is: How do I create an array that if a comparison is true, it puts the element in and if not it does nothing ?
Your code show three different comparisons. Which one are you talking about.
Pladio wrote:
I've attached a PNG snippet of my code.
That code makes very little sense. Why is there a shift register if the data in it never changes? What is the purpose of the inner FOR loop? Why are you creating a 2D array?
Do you want to remove all rows where the corersponding SD is zero, for example?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order

I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order. Any ideas, I've been playing with the idea but have had no luck, is this even possible?

Hi,
Please check it out the attached Vi.. Is this you need?
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney
Attachments:
Event.vi ‏11 KB

How to create an array using reflection.

How to create an array using reflection.
I want to achive something like this,Object o;
o = (Object)(new TestClass[10]);but by use of reflection.
To create a single object is simple:Object o;
o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
Anybody knows?":-)
Ragnvald Barth
Software enigneer

Found it!
the java.lang.reflect.Array class solves it!
Yes !!!

How to create an array of linklists??? ... plz

Hi guys,
I am trying to create a Hash table. My link list is already working. But i am still confused about how to create any array linklist for solving the collisions. Do i need to create a new instance of the linklist for each array slot? What is the better way to do?
just need some hint to start it.
abdul

Yes, you need to create a new instace for each slot.
LinkedList[] ht = new LinkedList[size];
for(int x = 0; x < size; x++)
ht[x] = new LinkedList();

How to create an array variable

Hi folks,
I'm developing a flowN activity , for each branch created, I need to pass different values (values I get from DB).
For this my plan would be,
-create an array variable , load all the values(from DB) into the array
-pass the array to each branch in flowN activity based on the index
As I'm newbie to BPEL, I do not know how to create an array variable.
Could you people guide me please.
Regards
Viki

Hi,
I created my string array like
<element name="string_array">
<complexType>
<sequence>
<element name="input" type="string" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
<variable name="arr" element="client:string_array"/>
I am able to add values to my array variable named as "arr"
When I use the following code snippet, it gives my the value of the entire list.
<%ora:getNodeValue(bpws:getVariableData('arr'))%>
But when I try retireve values one by one like <%ora:getElement('arr','/client:string_array/client:input',[0])%>, its giving me error.
Guide to get throu' this.
Viki

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

How to add byte[] array based Image to the SQL Server without using parameter

how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that sql accepts byte [] array like sql image type
not using cmd.ParametersAdd() method
here is Isle() method content

SQL Server binary constants use a hexadecimal format:
https://msdn.microsoft.com/en-us/library/ms179899.aspx
You'll have to build that string from a byte array yourself:
byte[] bytes = ...
StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
foreach (var b in bytes)
builder.Append(b.ToString("X2"));
string binhex = builder.ToString();
That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
data.

How to create and add table type to a DDIC Structure in sap 3.1H

How to create and add table type to a DDIC Structure in sap 3.1H

How to create and add table type to a DDIC Structure in sap 3.1H

How to create an array in bpel?

I am trying to integrate a web service into open-esb. The web service consumes an unbounded array of a "userInfo" data structure. The issue is that although I can create bpel to receive a message like this, due to type incompatibilities I need to create a different array within bpel to pass to the webservice.
To date I have not found a way to create an array within open-esb's bpel. After extensive googling I have found that other ESBs define their own proprietary extensions to add nodes to an array.
Thus I have two questions:
First, does open-esb support creation of arrays? and if so, how do I create the array and add nodes to it?
Second, and perhaps more importantly, is using an <assign> activity the best way to transfer a potentially large array from one variable to another (i.e., will it perform well)? Or should I use XSLT to transform the array from one wsdl type to another? And if XSLT is the answer, how can I do this within open-esb?
Thanks in advance,
Steve
PS. Based on the various googlings Ive been doing this question seems to be frequently asked. If someone will help me find a solution I plan on writing a short "how-to" article for posting back to the community. Given that arrays are one of the most basic data structures I hope the article will be useful for others struggling with this issue.

I think this is all covered in Steve-Nies other thread concerning this subject, entitled "Need help with BPEL please" (http://forum.java.sun.com/thread.jspa?threadID=5116270&tstart=0)

How to create Componet array in NetBean?

I want to create ten or more text field with same format.
Also want to use NetBean to done it with out typing the code self.
How can I do?
I mean whether easy and fast method to create componet array in netbean.

I want to create ten or more text field with same
format.
Also want to use NetBean to done it with out typing
the code self.Why not? because it's the fastest, simplest and safest way.
How can I do?
I mean whether easy and fast method to create
componet array in netbean.Just like oyu'd do it without Netbeans.
If you still want to do it in Netbeans, I suggest reading the manual. This is not a Netbeans product support forum, and I'm definitely not inclined to help as you don't want it done by writing code yourself.

How to create an array of Vectors ?

Can I create an array of vectors in Java ? For instance I want to have an array of days in a year, an on each day there are several things to do, and I don't know this up front, so I want it to be a Vector holding the things_to_do object, some days might have nothing to do, so there should be null or an empty vector for that day. So I came up with something like the following :
Vector<Things>[] Days_Array=new Vector<Things>[365];
But Java doesn't allow this ?
Frank

Opps , I forgot to ask, although it compiled successfully, but it gave me a warning : [unchecked] unchecked conversion
I wonder if there is a way to fix it without turning the warning off, what I meant is : Am I missing something that caused the warning that I should add to the code, I don't want to turn off the warning. For instance how can I make the "conversion" checked ?
Frank

How to create an array of ArrayLists?

Hello,
I'm trying to compile the following code:
ArrayList<Object> arr[];
arr = new ArrayList<Object>()[size];in order to create an array of ArrayLists. I'm being met with the following compilation error:
The type of this expression must be an array type but it resolved to ArrayList<Object>
Can anyone show me how to correctly do this?
Thanks

{color:#3D2B1F}This line:
List<Object>[] arr = new ArrayList<Object>[5];generates the compiler error: "generic array creation" (generics and arrays don't play well together)
Since you are just parameterizing with Object, you can use non-generic collections:
List[] arr = new ArrayList[5];Me? I don't like mixing arrays and collections. I would have a list of lists:
List<List<X>> matrix = new ArrayList<List<X>>();{color}

How to create an array with controls and indicators?

I want to create a scrollable array of control/indicator pairs from a config file. Something that looks like the attached image. Of course, I can only create an array that's either either a control or indicator -- not both (the operator should not be able to edit the name or change the state of the LED). So I guess I need to split the array and have two side-by-side and SOMEHOW link the scrollbars. But then I have no idea how I can get the control switch states from the array. Is there an easier way to do what I'm trying to do?
Attachments:
New Bitmap Image.JPG ‏11 KB

Hello,
Another option would be to use the custom control I built for you, see below. You can just drop this into an array, it should look like your example (more or less).
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Custom Switch.ctl ‏8 KB

How to create an array in if/else or case structure without 0's ?

Similar Messages

Maybe you are looking for