How to create an array with controls and indicators?

I want to create a scrollable array of control/indicator pairs from a config file. Something that looks like the attached image. Of course, I can only create an array that's either either a control or indicator -- not both (the operator should not be able to edit the name or change the state of the LED). So I guess I need to split the array and have two side-by-side and SOMEHOW link the scrollbars. But then I have no idea how I can get the control switch states from the array. Is there an easier way to do what I'm trying to do?
Attachments:
New Bitmap Image.JPG ‏11 KB

Hello,
Another option would be to use the custom control I built for you, see below. You can just drop this into an array, it should look like your example (more or less).
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Custom Switch.ctl ‏8 KB

Similar Messages

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

How to create a chart with x and y input arrays

I am trying to create a chart that receives chunks of data from a while loop. I know how to create a chart in order to append new data points to those points already in the display, but a regular chart doesn't let me specify the x axis data points. Is there a way to create a chart with x and y array inputs?
Thanx,
Tom

It's called an XY Graph. If you need an XY graph to behave like a chart, look at the shipping example called XY Chart.

How to Create a Table with Merge and partitions in HANA

Hi,
What is the best way to create a Table with MERGE and PARTITION and UNLOAD PRIORITIES.
Any body can you please give me some examples.
Regards,
Deva

Ok,
1) the UNLOAD PRIORITY has nothing to do with the order of data loads in your ETL process
2) Unloading of columns will happen automatically. Don't specify anything specific for the tables, then SAP HANA will take care about it
3) Not sure where you get your ideas from, but there is no need to manually "flush" tables or anything like that. SAP HANA will take care of memory housekeeping.
4) Partitioning and how to specify it for tables has been largely documented. Just read up on it.
5) Delta Merge will happen automatically, as long as you don't prevent it (e.g. by trying to outsmart the mergedog rules)
Seriously, I get the impressions that this list of requirements is based on some hear-say and lack of actual information and experience with SAP HANA. There are a couple of extensive discussions on data loading optimization available here in SCN and on SAPHANA.COM. Please read those first.
All this had been discussed broadly a couple of times.
- Lars

How to create a playlist with podcasts AND music?

I created a playlist with both podcasts and music in it. The thing is when I try to shuffle it, only music plays. When I start playing podcasts, none of my music plays. How can I make them both play at the same time and shuffle on the same playlist?

In iTunes, you created a playlist (with songs and podcasts), and then synced that playlist to the iPod? Or you manually created a playlist on the iPod, and manually added songs and podcasts to that playlist? It needs to be an actual playlist that is on the iPod, not simply songs and podcasts on the iPod.
If you have a playlist on the iPod.... In shuffle mode, only songs play. Set the iPod to play-in-order (not shuffle). Then, select the playlist on the iPod (by selecting Music -> Playlists from the Home screen). With the playlist selected, press Play/Pause. The playlist plays the song and podcasts in the order shown for that playlist in iTunes.

How to create a array with variables dimensions?

I try to create a array like that:
Object[][] data;
data = new Object[] [];
But that's doesn't work!
Apparently I must specify the dimension of my array
So I have done like that :
Object[][] data;
data = new Object[3] [3];
And that work!
But the problem is when I need to add extra elements to my array.
If I write :
data[4][1] = "123";
I have the error message :
java.lang.ArrayIndexOutOfBoundsException
So, how can I defined a array with variables dimensions OR how can I add a dimension to a array?

if you have:
Object[][] data;
data = new Object[3] [3];you end yo getting ArrayIndexOutOfBoundException if you try to point to some other Indexes. You can increase the size by doing new:
Object[][] data;
data = new Object[4] [3];and then copy the old Arrays to this one... this is heavy.
Other thing to consider then is using some other datastructure, such as Vector, which grows along you add elements to it.
P_trg

How to create an array with Generic type?

Hi,
I need to create a typed array T[] from an object array Object[]. This is due to legacy code integration with older collections.
The method signature is simple:public static <T> T[] toTypedArray(Object[] objects)I tried using multiple implementations and go over them in the debugger. None of them create a typed collection as far as I can tell. The type is always Object[].
A simple implementation is just to cast the array and return, however this is not so safe.
What is interesting is that if I create ArrayList<String>, the debugger shows the type of the array in the list as String[].
If I create ArrayList<T>, the class contains Object[] and not T[].
I also triedT[] array = (T[]) Array.newInstance(T[].class.getComponentType(), objects.length);And a few other combinations. All work at runtime, create multiple compilation warnings, and none actually creates T[] array at runtime.
Maybe I am missing something, but Array.newInstace(...) is supposed to create a typed array, and I cannot see any clean way to pass Class<T> into it.T[].class.getComponentType()Returns something based on object and not on T, and T.class is not possible.
So is there anything really wrong here, or should I simply cast the array and live with the warnings?
Any help appreciated!

Ok. May be you could keep information about generic type in the your class:
public class Util {
    public static <T> T[] toTypedArray(Class<T> cls, Object[] objects){
        int size = objects.length;
        T[] t = (T[]) java.lang.reflect.Array.newInstance(cls, size);
        System.arraycopy(objects, 0, t, 0, size);
        return t;
public class Sample<T> {
    Class<T> cls;
    T[] array;
    public Sample(Class<T> cls) {
        this.cls = cls;
    public void setArray(Object[] objects){
        array = Util.toTypedArray(cls, objects);
    public T[] getArray(){
        return array;
    public static void main(String[] args) {
        Object[] objects = new Object[] { new LinkedList(), new ArrayList()};
        Sample<List> myClass = new Sample<List>(List.class);
        myClass.setArray(objects);
        for(List elem: myClass.getArray()){
            System.out.println(elem.getClass().getName());
}

How to create an array of JButtons and How to implment it ...

This is what i want to do - I want to create an array of JButtons that has 8 rows of 8 buttons, could someone help me with this (im creating a checkers board) all i need is the array of buttons and them in 8 rows of 8 buttons .... im pretty confident in the way of making them do what i want but need help getting it up and running .... please note it is to be done in the swing environment and not in a applet or anything - ie in a JPanel and a JFrame .... any help would be GREATLY appreciated.

U can try this
        JButton b[][] = new Button[8][8];
     setLayout(new YourLayout());
     for(int i =0; i<8; i++)
          for(int j =0; j<8; j++)
               b[i][j] = new Button("Test");
               b[i][j].addActionListener(new YourAction());
               add(b[i][j]);
     }

How to create the document with originals and checkin that document

I am using this 2 bapi for creating DMS ,
BAPI_DOCUMENT_CREATE2
BAPI_TRANSACTION_COMMIT
BAPI_DOCUMENT_CHECKIN2
BAPI_TRANSACTION_COMMIT
at last we want to c in DRAO table the created doc no should be updated here.
But it not updating.how can i update in the table..
Please tell via code..

How do you call BAPI_DOCUMENT_CREATE2?
I just tried with the example given in the documentation and with a little adjustment I created a document with an original which appears in the DMS_DOC_FILES table.
DATA: ls_doc    LIKE bapi_doc_draw2,
        ls_return LIKE bapiret2.
DATA: lf_doctype    LIKE bapi_doc_draw2-documenttype,
        lf_docnumber LIKE bapi_doc_draw2-documentnumber,
        lf_docpart    LIKE bapi_doc_draw2-documentpart,
        lf_docversion LIKE bapi_doc_draw2-documentversion.
DATA: lt_files LIKE bapi_doc_files2 OCCURS 0 WITH HEADER LINE,
        lt_drat LIKE bapi_doc_drat OCCURS 0 WITH HEADER LINE.
ls_doc-documenttype    = 'Z01'.
ls_doc-documentversion = '01'.
ls_doc-documentpart    = '000'.
ls_doc-statusextern   = 'DR'.
ls_doc-laboratory     = '001'.
REFRESH lt_files.
CLEAR lt_files.
lt_files-docfile      = 'c:\BP\test.docx'.
APPEND lt_files.
CLEAR lt_drat.
REFRESH lt_drat.
lt_drat-language    = 'EN'.
lt_drat-description = 'Info Rec Description'.
APPEND lt_drat.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        EXPORTING: documentdata         = ls_doc
        IMPORTING: documenttype         = lf_doctype
                   documentnumber       = lf_docnumber
                   documentpart         = lf_docpart
                   documentversion      = lf_docversion
                   return               = ls_return
       TABLES: documentdescriptions = lt_drat
               documentfiles        = lt_files.
IF ls_return-type CA 'EA'.
    ROLLBACK WORK.
    MESSAGE ID '26' TYPE 'I' NUMBER '000'
            WITH ls_return-message.
ELSE.
    COMMIT WORK.
ENDIF.
Best Regards,
Martin

How to create Date relationship with Fact and DimDate on Tabular model?

I have two tables in SQL Server 2014 SSAS Tabular model.
DimDate(defined as data table) have date column (format is 1.7.2010 00:00:00) This table have been impoted from AdventureWorks.
FactSales have SalesDate column (format is 25.03.2015 18:08:05). This table have been imported from Excel. Colums is defined as date in Excel.
When I set Data Type as date in Tabular I get error:
"Datatype conversion failed for table...Value:'25.03.2015 18:08:05'"
I have tried to create calculated colums like =DATEVALUE([SalesDate]) and =DATE(YEAR([SalesDate]),MONTH([SalesDate]), DAY([SalesDate])), but getting error.
What should I do so that I can create relationship between Date column?
Kenny_I

Hi Kenny_l,
According to your description, you fail to convert the data type into date after creating calculated column with expression. Right?
In Analysis Services, the tabular will detect the source data type to determine which data type can be converted to. If you want to convert a data into date type, no matter this data is from database or a file, you must make sure this data can be recognized
as a date in SQL Server. In this scenario, the format '25.03.2015 18:08:05' can't be recognized as date even you apply DAX functions. So please change the format of the column in excel like "03.25.2015 18:08:05".
PS: For testing, you can create a temp table and insert sample text into a date column, because the date format in SQL Server depends on the location selection when installing.
After retrieving data from data source and all values within column are correct format, you can change the data type into Date, and select the format you expect.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

How to create a loop with control over iteration?

Is it possible to create your own loop where you can CREATE your own iteration variable and change the iteration variable's count whenever its needed?
The For loop and While loop in labVIEW have the iteration (i) provided but I can't change where it begins and such. The i always starts at i=0, however, if i can make my OWN iteration variable, where I can feed back into it whenever I need to jump to a specific iteration count, it would be awesome.
Thank you.

BurningH34t wrote:
if i can make my OWN iteration variable, where I can feed back into it whenever I need to jump to a specific iteration count, it would be awesome.
Thank you.
The only thing I can think of involves a 1.21 Jigawatt Flux Capacitor and a DeLorean.
=====================
LabVIEW 2012

How to create Base Dimensions with MaxL and Text File?

Hi,
Doing a scratch rebuild of a cube every month. Don't want to have a 'dummy' outline with base dimensions to copy over every build. Instead want to build from text file somehow. Thus my plan is to: 1) Delete the existing app/db 2) Create a new blank app/db 3) Create the base dimensions in the outline via text file and 4) Build entire outline via a text file. I'm stuck on #3 how to get the 'base dimensions' built via text file. I need:
ACCOUNTS
PERIOD
VALUE
VIEWS
SCENARIO
CUSTOM4
YEAR
CUSTOM3
CUSTOM2
ENTITY
CUSTOM1
I see this MaxL, but it uses a 'rules file' and I never have built a rules file to create base dims so I'm confused if it's possible or not...
import database sample.basic dimensions
from data_file '/data/calcdat.txt'
using rules_file '/data/rulesfile.rul'
on error append to '/logs/dimbuild.log';

We rebuild our Departments and Organization from an enterprise hierarchy master each week.
The way we implemented (what you call #3) was to not do #1 and #2, but to have a "destructive" load rule for each of these dimensions using a text file. (in the "Dimension Build Settings" for the load rule, select "Remove Unspecified" to make it destructive)
The text file just has the dimension name (parent) and any children we needed defined in a parent/child relationship. For instance
"Sales Departments" "0100-All Departments"
This essentially works the same as deleting the app because the destructive load rules will drop all the blocks of data that were unspecified.
Then we run our SQL load rule to build the rest of the dimensions from the Location Master.
We perform a level-0 export prior to this process, then reload the level-0 data and execute all the consolidation scripts to get the data back (now in a current enterprise defined hierarchy)

Urgent:HOW TO CREATE A PROGRAMME WITH MENUS AND MENUITEMS IN AWT?

hi am new to java..............and i know very less about java
can anyone help me by sending the code for creating menu with file,edit ,view and menuitems as open,save,exit.
and also plss help me how to get a filedialog box in the same programme when i click the open in filemenu.
in AWT.....................plsss urgent

sangi wrote:
hi am new to java..............and i know very less about javaredundant and barely intelligible
can anyone help me by sending the code for creating menu with file,edit ,view and menuitems as open,save,exit.have you tried a Swing demo? aside from the fact that this code has likely been written and published hundreds of times on the web, a simple tutorial would have shown you how to do this.
and also plss help me how to get a filedialog box in the same programme when i click the open in filemenu.
in AWTslow down, one thing at a time
go do the tutorials first
.....................plsss urgentstating your task is urgent is offensive here
learn how to communicate lest you get flamed
good luck

How to create Clipping Masks with Shapes and Text?

Hi there! I am new to Illustrator and am currently attempting to learn it. I am creating a logo that has text and has a shape that goes through the text to make the text appear as if it has claw marks in it.
I have two layers. The layer with the shape "claw" marks, and a layer with the text. The shape layer is currently above and the text layer is currently below. If I select both layers and click on Make Clipping Mask it has the text displayed within the little claw marks, how do I reverse that? Because when I try to change the order of the layers it doesn't clip anything?
Thank you so much!
Aaron

Hi Monika,
Sorry for taking so long to reply... This is what I am trying to accomplish. I tried following your directions above, but that only made the text invisible and I tried moving the claw layers above and below the text... and it only appeared as if the claws per se were filling up with the text color.
Here is what I am trying to accomplish:

How to create process chain with dso and infocube at a time

hi friends,
i have a FLATFILE in application server and i need to upload it to STANDARD DSO and i created a INFO PACKAGE and DTP for DSO.
i have a STANDARD INFOCUBE to upload data from above DSO. here DSO is the source. i want to schedule this process in process chain. how could i do this. any one please give me solution.
can any one explain me the options in RSPC and how they work and where we exactly use. this is very helpful to me. please give me guidance. thank you.
thanks,
sree

First make sure you have already created the infopackage to load the data from server to the DSO and the DTP to load data from DSO to the Cube.
Now goto Tcode RSPC.
Choose Create process Chain option. provide appropriate technical name and description.
Drag "Execute infopackage" process type from left hand side pane in RSPC. Choose the infopackage to load the data from Server to DSO. you can find this infopackage using the F4 help in the above selected process type.
Drag the "data transfer process" process type to load data from the Flat file data source above to the DSO.
Then Drag the "Activate DataStore Request" process type and select the DSO in which you would load the data using the above DTP.
Drag the "data transfer process" process type to load data from DSO to the Cube.
Save, activate and schedule the process chain according to appropriate time.

How to create an array with controls and indicators?

Similar Messages

Maybe you are looking for