How to create an attribute editable with WebWord Editor

Hello,
When I create a new element type, I can set the basic element type to text. It adds a text attribute to the element type that is editable with WebWord Editor by default.
Now let's say that I want to have several text attributes in my element type
When I create my own text attribute and add it to my element type, this one is just a plain text area. Is there a way to edit it with WebWord Editor?
Best Regards,
Mickael

I am afraid not. Oracle confirmed this.
Sorry for you; it's now been so long since I was sorry for me 'bout this problem...

Similar Messages

  • How to create a degree symbol with vi editor?

    Running Solaris 9 SPARC
    How do I create a degree symbol (as in 33 degrees ) using vi
    Thanks

    Well, it should be exactly the same way as you would create it in any other application such as your shell.
    On my Sun keyboard i can get a degree symbol by using Meta-0 (thats a zero :-)
    .7/M.

  • How to create a csv file with NCS attributes?

    Hi
    i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
    How to create a csv file with all required attributes?
    This is part of NCS online help talking about this topic:
    Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
    Note        The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
    Bellow is test csv file i created but does not work:
    10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    The error i am getting while importing this file:
    Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    Assistance appreciated.

    It looks like the IP address field is incorrectly set.,
    It should be as follows
    {Device IP},{Device Subnet Mask}, etc etc
    so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
    10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    below is a link to the documentation
    http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
    HTH
    Darren

  • How to create a attribute for a table

    I am created a table with four columns.
    How to create a attribute for each column.........

    Hi Cranjith Kumar,
    First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
    Reward points if useful.
    Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM

  • How to create an attribute dimension in Essbase Studio?

    I cannot figure out how to create an attribute dimension using Essbase Studio. The online help states that I need to "Find the Attribute settings grouping in the center" of the member properties dialog box. I suspect that I'm having a problem figuring this out because I don't have the attribute dimension properly defined in the relational data source or in the mini-schema. I've tried creating a table with no key relationship to the other tables and with no logical joins defined, but that doesn't seem to help. Any ideas?

    so in the 11.1.1 version you would click on the member name in the hierarchy you added to the Essbase model and in the center pane of the general tab should be the attributes settings section.
    If I had a dimension called stores wth two groupings unser it region and store_type, I would click on store_type and add the attribute info

  • How do  create a slide show with both video and photos in elements 12

    how do  create a slide show with both video and photos in elements 12

    Hi Brian
    You can batch process a set of prepared slides from Full Edit (see image) using:
    File >> Process Multiple Files
    In the PMF dialog you can choose filename, date, or description (caption)
    Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
    Click image to view

  • How to create/add attributes in element list in Screen (example 100)

    HI,
    how to create/add attributes in element list in Screen (example 100)
    I mean after creating screen ..it has "OK CODE " attribute in element list tab in 100 screen.
    I want to create "container" in Element list tab in my screen 100 program
    I want to create new layout " container" in the element tab (i know if i click on layout button where i can create manually)
    Thanks
    Edited by: Raja on Apr 29, 2009 4:19 PM

    Hi Raja,
    Do you remember how you resolved this problem? I am facing the same. Appreciate your response.
    Thanks,
    Shailaja

  • How To Create Drop Down Menu With Tab

    hi
    How To create Drop Down Menu with tab in Header of application like website Horizontal Dropdown Menu In html.
    Thanks
    Manoj
    Edited by: Manoj Kaushik on Dec 30, 2009 4:16 AM

    Try the Apex forum {forum:id=137} someone there may have an answer.
    Which version, that could be important, XE out-of-the-box has apex 2.1 if it hasn't been upgraded to 3.x

  • How to create an unsolved cube with awm???

    hi all,
    I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
    I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
    Some one can tell me how to create an unsolved cube with AWM ou other soft please!

    SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
    If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
    Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
    Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
    Hope this helps
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

  • How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

    1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
    When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed  in the stat plan  ?
    2. Does rowsource statistics gives some kind of  understanding of Extended stats ?

    You can get Row Source Statistics only *after* the SQL has been executed.  An Explain Plan midway cannot give you row source statistics.
    To get row source statistics either set STATISTICS_LEVEL='ALL'  in the session that executes theSQL OR use the Hint "gather_plan_statistics"  in the SQL being executed.
    Then use dbms_xplan.display_cursor
    Hemant K Chitale

  • How to create a Sales order with ref to Contract using Function Module

    How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

    We have a unique situation where we like change the sold-to customer of the sales order
    once order has been created. These orders have been created using either by function module
    BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
    These two processes work abosolutely fine except someone might have change the sold-to
    customer of the ship-to customer of the original sales order. If this the case then the new
    sales order will be created with the old sold-to and with not the new sold-to.
    We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
    the returned parameteres of the BAPIs and they are all successful but sold-to remains the
    same old one.
    Any help would be much more appreciated.

  • How to create a pdf file with CS5

    Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts.  Can someone please help me with this ?  The "help" button in CS5 doesn't seem to cover this question.  Nor do the FAQs.
    Thank you very much.

    Save As... Photoshop PDF.

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • How to create a web template with company logo

    how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
    2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
    thanks to you all

    Hi
    1) Please read
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
    2) Create a condition in the Query Designer: Use a formula variable
    See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
    Heike

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

Maybe you are looking for

  • Can not insert data to MS Access

    Hi All, I have create a table by manual in Access , in which I defined souch fields: SORTCODE(text type),FOODNAME(text type)..., and then I use follow statement to insert value : private DefaultTableModel model = new DefaultTableModel(); Vector colle

  • Creating Whole Audiobooks in iTunes

    I've ripped the CD's of an Audiobook into iTunes. The book is 24 CD's long and has hundreds of separate tracks within it. In the 'Info' section for each track, I've clicked on 'Options' tab and set 'Media Type' to Audiobook. When I click on Audiobook

  • Touch up post rotoscope

    I'm wondering if there is some way to further touch up something that has been rotoscoped out of footage. I mean the subject of rotoscope (the inside of the mask) is what is beingsaved for futher usage. (not to be used on the masked off footage.) It'

  • EDI Integration w/ B1

    Where you I find a list of solutions/partners that will integrate EDI w/ B1? Jim

  • Using Parse REST APIs

    I know that you will recommend me to download Parse .Net SDK. But the problem is that it uses Tasks which are only available in .Net 4.5 The older versions of .Net are not supported. That is why I am going to use parse REST APIs. Having a problem in