How to create an commerce chart of sizes and prices, etc?

How to create an commerce chart of sizes and prices, etc?

Hi,
Andreas is right, we have many ways to deploy Windows 8.1 like OEM.
You can also try the ADK:
Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1
http://www.microsoft.com/en-hk/download/details.aspx?id=39982
The Windows ADK enables two key scenarios: Windows deployment and Windows assessment.
Windows Deployment is for OEMs and IT professionals who customize and automate the large-scale installation of Windows on a factory floor or across an organization.
Kate Li
TechNet Community Support

Similar Messages

  • How to create a content list for sections and chapters etc

    just started with Pages on iPad 2 and really like is BUT where is the control for creating a content list for a long document for chapetrs etc?
    thanks guys

    Hi,
    Thank you for posting the screen shots I have been unsuccessful in determining exactly where the problem is coming from. Would it be possible for you to post the actual VI so that I can work with it so see if I can reproduce this issue using your code? In regard to your questions:
    1.    You are correct 1000 samples read should write 1000 samples to the table
    2.    I believe the discrepancy is due to amount of manipulation done between the read and the file write but I cannot be certain, without the code to work with.
    3.     I am unclear as to exactly what is happening. If you are reading empty channels then you may receive erroneous readings this is to be expected. When you connected your accelerometer did you connect in RSE or differential? You can also manipulate the signal range with will affect the gain setting, how off are the readings?
    JaceD
    Signal Sources Product Support Engineer
    National Instruments

  • Finder windows size and position etc.  on clients' machines

    How to configure server's finder windows size and position etc. are on clients' machines so that they persist? Thank you!
    PS: If this has already been discussed, please refer to the thread. Sorry for double post in that case.

    Try connecting to the Share as the Server Admin, make your window the size and position you want and logout again.
    This information is stored in the .DS file.
    Message was edited by: Patrick Savelberg (Private)

  • How to create the custom charts?

    how to create a custom charts? for example the donut shapes, but for the data can be automatically adjust (like a available charts on keynote)

    Keynote and Numbers do not have a tool for making Donut Graphs. There are ways to make them using HTML, but I prefer to cheat:
    1 Create your first graph as a pie chart and add a circle of solid color to the center
    2. If you need more, take a screenshot of the pie chart with the center fill  and drag the screenshot into Preview - in Preview > Select Tool (pulldown from Toolbar) > Instant Alpha and remove the inner filled circle and outer fill then Save As > PNG with Alpha
    3. Drag your new hollow shape into Keynote. This chart can be placed over another pie chart with a filled center (the fill should match the background)
    Not as graceful as a special tool but can get the job done quickly - changing the data requires starting it over since at least one of your donuts my be an image rather than a pie chart with variable data.
    Try it. If you need more specific tools, Google Donut Shaped Charts for starts.
    Good luck

  • How to create the timeline chart in SSRS 2008

    Hello Everyone!!
    How to create basic timeline chart with x asix as month and  show project start date as marker on this in ssrs reports
    Which type of chart i should use and any sample link?
    Something like in below link
    Timeline
    image

    Hi SonikaJ,
    After testing the issue in my local environment, we can enable the Scalar axis option to display a set of axis values on a continuous scale and reset the “Interval” property of the X-Axis. For more details, please see the following steps:
    Drag a Column Chart to design surface, insert corresponding fields.
    Right click on the Horizontal Axis and open the “Category Axis Properties” window.
    Check the “Scalar axis” option, set the “Interval type” to “Months” and set the “Interval” to 1 for example.
    Right click on the Vertical Axis and uncheck “Show Axis” option to hide the Y-Axis.
    Right-click the series columns to select “Show Data Labels”, then right-click on the Label and select Series Label Properties.
    In the Expression dialog box, modify the expression to anything you like.
    To adjust the width simply select the appropriate series and go to the properties pane and drill down into the Custom Attributes and find the PointWidth. Then set the value to 0.1 for example.
    If there are any other questions, please feel free to let me know.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • From SharePoint2013 list item data how to create Google Interactive Chart?

    HI All,
    From SharePoint2013 list item data how to create Google Interactive Chart?
    Thanks in advance!

    Hi,
    To push data from list items to Google Chart, we can use JavaScript Client Object Model or REST API to retrieve the data needed.
    Here are two links about using JavaScript Client Object Model to access list items:
    http://msdn.microsoft.com/en-us/library/office/hh185006(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/office/hh185007(v=office.14).aspx
    From the links from the official site of the Google Chart, we can find out the method to populate data into Chart:
    https://developers.google.com/chart/interactive/docs/quick_start
    https://developers.google.com/chart/interactive/docs/examples#gauge_example
    Best regards
    Patrick Liang
    TechNet Community Support

  • How to create an org chart diagram iWork's?

    How to create an organizational chart diagram in iworks applications?

    Based on your tag, I would assume you are asking about iworks for OSX, in which case you are in the wrong forum and may wish to post here: https://discussions.apple.com/community/iwork. You might find some useful information in this: http://help.apple.com/pages/mac/5.2/#/tana3148ea61
    If your inquiry is about Pages for iOS (iPad and iPhone): http://help.apple.com/pages/ipad/2.2/#/tan9ad18c384

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create a table with datatype blob and insert a pdf file (ravi)

    how to create a table with datatype blob and insert a pdf file,
    give me the explain asap
    1.create the table?
    2.insert the pdffiles into tables?
    3.how to view the files?
    Thanks & Regards
    ravikumar.k
    Edited by: 895044 on Dec 5, 2011 2:55 AM

    895044 wrote:
    how to create a table with datatype blob and insert a pdf file,
    give me the explain asapPerhaps you should read...
    {message:id=9360002}
    especially point 2.
    We're not just sitting here waiting to answer your question as quickly as possible for you.

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

  • How to create a matrix with constant values and multiply it with the output of adc

    How to create a matrix with constant values and multiply it with the output of adc 

    nitinkajay wrote:
    How to create a matrix with constant values and multiply it with the output of adc 
    Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • How to create a hierarchy in Regional Structure and how to use it

    Hi,
    Please guide me how to create a Political Region Structure hierarchy and how to use it.
    Thanks and Regards

    Hi,
    Thanks for reply please.
    I request you to please copy paste all the possible information here. It will be a great help.
    I hope you understand why we can not provide our id on this forum.
    Please guide.
    Thanks and Regards
    Edited by: MP Vashishth on May 18, 2009 7:14 AM

  • I just want to know that how to change the font color, font size, and forgr

    i just want to know that how to change the font color, font size, and forground color in JTextPane for the Selected text. i try diffrerent menthod like setFont and setColor, these methods change the fonts of the whole textpane. so please reply me as soon as possible, and thanks in advance.
    Moazzam

    Sell the Old one... Buy a New one...

Maybe you are looking for