How to create an email group from fellow email recipients

I'm sorry for asking what has to be a very basic question but I've not been able to find the answer here or anywhere.
Basically, I want to cut/paste 40-50 email addresses from an email that was sent to me into my address book as a separate Group. ..These are email addresses for players on a sports team. ..I don't know their full names, companies, ph. numbers etc... and don't care to keep that info on hand.. Nor do I want to spend the time adding each as a separate contact. I just need to keep their email addresses. ..I may add addresses to this from time to time, or remove, etc.. For now, whenever I want to send an email to this group, I have to dig up the email sent to me that contained all the addresses as addidional recipients.
Thanks for reading/ replying!
Syd123

Same same. Did you get an answer yet??
Just ridiculous isn't it?

Similar Messages

How to create Portal/OID groups from AD OUs and keep them sync'd?

We are currently doing a simple one-to-one import sync mapping from Active Directory to OID for use by Portal.
In AD there are 40+ OUs with CN=username records, that we would like to have mapped to 40+ Portal groups with CN=username records as unique group members. We want to manage Portal privileges at the Portal group level rather than for each of 3,000+ individual users.
Each OU has it's own AD admin, so there is no way of knowing at what sub-level in the OU, an AD admin might create a CN=username record.
I had thought to manually create 40 new Portal groups, since the OUs seldom change. Now, I need to know how to create/map each of the OU=xxx, CN=username values as a unique member of the correct Portal group. During the sync, if an AD CN=username is added/modified/deleted from an existing OU=xxx, that same add/modify/delete needs to happen in the appropriate Portal group.
If somebody could assist me in "making it so", I would appreciate your time and help.
--Don

If you are already running the AD->OID synchronization, where do your OU's end up? It all depends on the mapping profile you (should have) set up.
Not sure where Portal stores the OID stuff, but you sjould be able to change the profile in such a way it ends up in the correct tree

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How do I send a group from my address book to someone else?

How do I SEND A GROUP FROM MY ADDRESS BOOK TO SOMEONE ELSE.

Yes you can by creating a group and then dragging the contacts in to it. However, since iCloud, the Edit Distribution List feature has been grayed out. Without that feature, it is not possible to specifically select a single email address for those contacts that have multiple email addresses. A major flaw that will hopefully be fixed.

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

How to create a standby redolog from rac to non rac ??

Hi,
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
pls help

854393 wrote:
Thanks Shivanandha,
(maximum number of logfiles for each thread + 1) * maximum number of threads
Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
Hope This helps.

How to create a p7c format from a pem or der or cer

Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

On Windows double click the der or cer certificate. This should open it in the
Certificate viewer.
Open the Details tab, click on the Copy to File button and select pkcs #7 format.
Pavel.
"Subodh" <[email protected]> wrote:
>
Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html
and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh

How to create a infolettre starting from MUSE?

How to create a infolettre starting from MUSE?

Hi,
in addition to @mac_heibu, check this thread for an explanation, Re: Using Adobe Muse to create a simple html email template

How do i CC: a group from my address book

when I reply to a message, how do I pick a group from my address list and have the reply cc:'ed to everyone in that group ?
in the "WRITE" box that pops up, there's no reference to address list and when I start typing the name of the group, it does not come up in the suggested completions.
thanks
richard

In principle, open a Cc: box in your email message composition window, and add the "group" (aka Mailing List) to that.
Is it OK for all the members of the List to see and know each others' addresses? Would Bcc: be appropriate?
I don't like the sound of the Mailing List not being volunteered as a possible address. What if you use F9 to reveal the Contacts Sidebar and add it from there?

Create dynamic distribution group from 2 or more OU ?

How I can create Dynamic distribution group from 2 or more OU ?
I tried modified solution from this post:
http://social.technet.microsoft.com/Forums/office/en-US/11a338b9-dbca-4378-9cda-4590a5b8d0f7/exclude-specific-ou-or-user-from-dynamic-distribution-groups?forum=exchangesvrgenerallegacy
but I'm not sure will this work.

Hi,
I have some tests in my environment using Exchange 2013. I use the following cmdlet to create a dynamic distribution group through multiple OUs, but it can't work as I expect.
New-DynamicDistributionGroup -Name "Users with mobile phones" -Alias "usermobile" -RecipientFilter{(((recipienttype -eq 'usermailbox') -and (MobilePhone -ne $null) -and ((RecipientContainer -eq 'contoso.com/users') -or (RecipientContainer -eq 'contoso.com/test
OU'))) )}
Actually, we have a dedicated support team regarding the Microsoft Scripts. I recommend you ask your question on our Microsoft Scripts forum which is staffed by more experts specializing in this kind of problems. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How do I copy multiple email addresses from one email sent TO me into a new message?

How do I copy multiple email addresses from an email sent to me into a new message?

Are they in the body of the mail?
Hold your finger down in that mail until the little blue bubble pops up. One of the options should be to select all. Choose that and all will be hilighted. then a pop up comes up to copy, choose that, open your destination and hold your finger down to get the paste dialogue.

Please can someone tell me how to save a MP3 file from my email on my iPad so I can put in on Facebook? Thankyou

Please can someone tell me how to save a MP3 file from my email on my iPad so I can put it on Faceboo? I use hotmail and please tell me step by step as I am not a tech guru lol. Thankyou

Hi jscher200,
Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

How to create a new folder in my email box

how to create a new folder in my email box?

Organizing Mail
http://support.apple.com/kb/HT5361

How to create an email group from fellow email recipients

Similar Messages

Maybe you are looking for