How to create an email group
Got an iPad 2 & I am having a hard time trying to set up an email group. Help! And thx!!
Same same. Did you get an answer yet??
Just ridiculous isn't it?
Similar Messages
-
How to create an email group from fellow email recipients
I'm sorry for asking what has to be a very basic question but I've not been able to find the answer here or anywhere.
Basically, I want to cut/paste 40-50 email addresses from an email that was sent to me into my address book as a separate Group. ..These are email addresses for players on a sports team. ..I don't know their full names, companies, ph. numbers etc... and don't care to keep that info on hand.. Nor do I want to spend the time adding each as a separate contact. I just need to keep their email addresses. ..I may add addresses to this from time to time, or remove, etc.. For now, whenever I want to send an email to this group, I have to dig up the email sent to me that contained all the addresses as addidional recipients.
Thanks for reading/ replying!
Syd123Same same. Did you get an answer yet??
Just ridiculous isn't it? -
How do I create an email group on iPad 2?
How do I create an email group from email or contacts to send emails to groups of like contacts
It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
If your groups are small you can try our free version on
http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
Any problems, get in touch on our support email.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales. -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
BB apps is not working, how to create BB email add? please help
BB apps is not working, how to create BB email add? please help
If none of the blackberry apps are working and you are unable to setup an email address..... have you got a Blackberry Data Plan active on your account?
-
How to create new storage group and mailbox database on exchange 2007 CCR
Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
How to create Infoset&user group query--(query report)
Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .Ggoto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu -
How to create a function group (step by step)?
I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y. -
How to Create a Facebook group subadmin where he cant remove actual admin
how to Create a Facebook group subadmin where he cant remove actual admin
This topic first appeared in the Spiceworks CommunityHi
Run pfcg and try to go to change with your restricted settings then click on the error message to get the table entries in performance assistant. Put those in prgn_cust via sm30.
Then use 22 instead of 02 in newly called object S_USER_SAS.
Make sure you have at least one user with * in that object for full access across the landscape before transporting the table.
Cheers
David
Edited by: David Berry on Oct 23, 2010 10:25 AM
Edited by: David Berry on Oct 23, 2010 10:26 AM
Forgot to say - when you have the new object value 22 in your restricted role and assigned to test user prior to moving to PROD the only way to go into change mode is to first go to the USER tab and then press change. Anywhere else and you'll still get the 'you are not authorised' message.
Edited by: David Berry on Oct 25, 2010 8:04 PM -
How to create users and groups using WLST Offline with Weblogic 8.1.4
How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo -
How to create a field group.
Hi all,
Can anyone please explain how to create a field group for few fields?
My requirement is i want to Create a specific fieldgroup for maintenance of the fields for the contacts TAB on the customer master
KNVK-NAME1
KNVK-NAMEV
KNVK-ABTNR
KNVK-PAFKT
KNVK-BRYTH
How todo this? please anyone can explain the steps.
MohanaIf you are creating these fields with Business Data Tool Set.
Then you will have field group and fields.
Field are attached to field groups,
Field groups are attached to view
Views are attached to Section
Sections are attached screen : you are calling as a tab
Regards,
Shiva Kumar
removed by moderator
Edited by: Jan Stallkamp on Dec 19, 2008 2:33 PM -
How to Create Multiple Distribution Groups
How to Create Multiple Distribution Groups using power shell?
i have created new csv file with below format
Name,Type
Test01,Distribution
test02,Distribution
Executed below command and it's prompting for each and every account to enter the sam account name.
[PS] C:\Windows\system32>Import-CSV "c:\dl\users.csv" | foreach {new-distributiongroup -name $_.name type $_.Type}
cmdlet New-DistributionGroup at command pipeline position 1
Supply values for the following parameters:
SamAccountName:
is there any other way to create bulk DL groups?
AucsnaPlease check this here is a similar thread.
http://social.technet.microsoft.com/Forums/exchange/en-US/0f86bb8a-63a2-44e5-921f-4a227221e71d/creating-distribution-groups
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
TS2370 how to create iphone contact group
does anyone know how to create a contact group on the iphone?
thanks.Read this:
http://www.ehow.com/how_5937574_make-contact-group-iphone.html -
How to create a security group to manage a Distribution list in exchange 2013
Hi folks,
We have AD synced with Online Exchange 2013. Dirsync is installed on AD. We would like to create a security group for a Distribution list(for instance: distribution list name is [email protected] and it is managed via a security group named "abc" ).
How can this be achieved? I do see an option under Online Exchange console using browser-> Groups to create a new security group but it doesn't allow me to add the group created in AD-instead it ask us to create a new one. If we create a new one in Exchange
online console- will it publish to our local AD?Hi TR,
Thank you for your question.
Are there any errors when we could not add group which is in local AD.
When we could not add group which was created In AD, there are following options we could check:
If current user who logon Exchange server has enough permission to add it
The connection between Exchange server and AD
If we create a new DG in Exchange online, it will be published to local AD.
We could run the following command to create DG for abc.com:
New-DistributionGroup -Name "abc" -Alias abc -Type "Security" -MemberJoinRestriction open
We could refer to the following link to learn more about distribution group:
https://technet.microsoft.com/en-us/library/bb124513%28v=exchg.150%29.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Hi,<o:p></o:p>
I have task to create remainder email notification 3 days before by comparing with End
date (my list item) so i created one calculated column in the list as remainder date by using that remainder date
i created, but my project manager told me create same remainder notification work flow without create that remainder date i tried to write calculation in work flow
but it is not working if any one knows how to do this please help me<o:p></o:p>
Thanking you,<o:p></o:p>
ArunDarly <o:p></o:p>Hi,
For reminder type requirements, I tend to use the ‘Information Management Policy’ SPD method as described in
this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also).
This method avoids the use of calculated columns; rather the workflow does the calculation and outputs information into a ‘reminder’ field. Also, I don’t like the idea of ‘paused workflows’, so this method works for me.
Cheers
Matt
Maybe you are looking for
-
Mail Reports that the home directory is full
My iBook has Norton Firewall on it and when I connected it to the high speed internet in a hotel room, the Firewall went crazy logging thousands of hits in a few minutes. Eventually the iBook stopped and a multi-lingual message requested that I reboo
-
BSP HAP_DOCUMENT in 6.0 not returning body of Appraisal document.
We have just upgraded to SAP 6.0. We had previously copied SAP BSP "HAP_DOCUMENT" to ZHR_HAP_DOC and made some minor changes. We have two custom Apprasial templates that we use. With this upgrade, The BSP is working for one template but only display
-
Male micro USB to female apple dock connector
Hey there does anybody know where I can get a male micro USB to female apple dock connector cable from? Many thanks
-
CS6 OS X and Illustrator creates temp files when saved
Hello all, First time to the forums, did a search and couldn't find anything, called customer support they didn't have an answer, and they directed me here. We recently upgraded from CS5 to CS6 for OS X(Snow Leopard). Now, when our users open a file
-
My IPad 2 will not charge over 58 %