How to create an email newsletter using iweb
I was hoping to create a VERY simple newsletter email using iWeb. Are there instructions somewhere on how to do this? I don't want to attach any type of attachment, it defeats the purpose of a short, simple email, yet I'd like a little teensy bit of graphics in it besides the text.
I guess if I could find the .html file that gets created when I hit save -- that would be helpful, but I can't seem to find the file I created on my system. Any clues? What do the files get created as?
Thanks. Ana
iWeb saves files packaged as ".sites2" file wich is an iWeb Domain file. If you are looking to access the "Raw HTML" you will need to publish your website to a folder. As pictured below:
Similar Messages
-
How to create Incoming Email Activity using BAPI or Function module
To create an Incoming Email Activity using BAPI 'BAPI_ACTIVITYCRM_CREATEMULTI' or using 'CRM_ORDER_MAINTAIN' . what parameters i need to pass to a bapi.
Suggest me with a solution.
Regards,
SanjaniFor activity you must fill the following structures of 'CRM_ORDER_MAINTAIN'...
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_activity_h = t_activity_h
iv_collect_exceptions = ''
CHANGING
ct_orderadm_h = t_orderadm_h
ct_input_fields = t_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
And at the end you must use also 'CRM_ORDER_SAVE' to performe the save.
Regards. -
How to create a WebServices by using a BI data?
Hi All,
Can anybody tell me that, How to create a WebServices by using a BI data?
If possible need the steps also...
Plz reply back me to [email protected]
Your help will be appreciated
Regards,
KIran TelkarKiran,
did you go through...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7ffba2ec-0c01-0010-2e81-988e48e3ca43
on how to expose a BW query as a web service...?
Arun
Hope it helps.. -
BB apps is not working, how to create BB email add? please help
BB apps is not working, how to create BB email add? please help
If none of the blackberry apps are working and you are unable to setup an email address..... have you got a Blackberry Data Plan active on your account?
-
Can someone please help me figure out how to "clear" recent email addresses used in Mail?
Can someone please help me figure out how to “clear” recent email addresses used in Mail? For example, as I begin typing a name/email address in the “To:” field, Mail begins suggesting addresses that I’ve previously used. I don’t want any suggestions unless they are in my contacts.
Another example: When using MS Outlook, it will also remember and suggest email accounts previously used, but I can arrow down and delete an account from the list so it won’t automatically popup or suggest in the future.
I appreciate any guidance in this matter.The iOS email app stores all email recipients in a list of previous recipients which cannot be turned off. The email address autofill feature when addressing an email pulls from contacts and from the list of previous recipients which can't be prevented. There is no option to clear the list of previous recipients - not at the present time anyway.
If you don't want any suggestions, select from contacts instead when addressing an email. -
How to create a crystal Report using C# and SQL Server
Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advanceHello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How to create new XML file using retreived XML content by using SAX API?
hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
private TransformerHandler handler;
Document meta_data;
private StringWriter meta_data_text = new StringWriter();
public void startDocument() throws SAXException {
void startValidation() throws SAXException {
StreamResult streamResult = new StreamResult(meta_data_text);
SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
try
handler = factory.newTransformerHandler();
Transformer transformer = handler.getTransformer();
transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
handler.setResult(streamResult);
handler.startDocument();
catch (TransformerConfigurationException tce)
System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
super.startDocument();
public void startElement(String namespaceURI, String localName,
String qualifiedName, Attributes atts) throws SAXException {
handler.startElement(namespaceURI, localName, qualifiedName, atts);
super.startElement(namespaceURI, localName, qualifiedName, atts);
public void characters(char[] text, int start, int length)
throws SAXException {
handler.characters(text, start, length);
super.characters(text, start, length);
public void endElement(String namespaceURI, String localName,
String qualifiedName) throws SAXException {
super.endElement("", localName, qualifiedName);
handler.endElement("", localName, qualifiedName);
public void endDocument() throws SAXException {
void endValidation() throws SAXException {
handler.endDocument();
try {
TransformerFactory transfactory = TransformerFactory.newInstance();
Transformer trans = transfactory.newTransformer();
SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
DOMResult dom_result = new DOMResult();
trans.transform(sax_source, dom_result);
meta_data = (Document) dom_result.getNode();
System.out.println(meta_data_text);
catch (TransformerConfigurationException tce) {
System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
catch (TransformerException te) {
System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImranSax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code} -
How to create the sales order using BAPI's ....?
Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln TYPE vbak-vbeln,
gs_order_header_in TYPE bapisdhd1,
gs_order_header_inx TYPE bapisdhd1x,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gwa_itab1 TYPE bapisditm,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gwa_itab2 TYPE bapisditmx,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gwa_itab3 TYPE bapiparnr,
gt_return TYPE STANDARD TABLE OF bapiret2,
gwa_itab4 TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = gs_order_header_in
ORDER_HEADER_INX = gs_order_header_inx
IMPORTING
SALESDOCUMENT = gs_vbeln
tables
RETURN = gt_return
ORDER_ITEMS_IN = gt_order_items_in
ORDER_ITEMS_INX = gt_order_items_inx
order_partners = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF. -
How to create custom report plugin using child region report metadata
Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
VSQLHANDLER APEX_PLUGIN_UTIL.T_SQL_HANDLER;
VCOLCOUNT NUMBER;
VCOLNAMES VARCHAR2(2000);
VAJAXIDENTIFIER VARCHAR2(100);
VPAGESIZE TYPEATTR := P_REGION.ATTRIBUTE_04;
VJSCODE VARCHAR2(32767);
BEGIN
VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
P_MIN_COLUMNS => 1,
P_MAX_COLUMNS => 999,
P_COMPONENT_NAME => P_REGION.ID);
VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
FOR I IN 1 .. VCOLCOUNT LOOP
VCOLNAMES := VCOLNAMES || '{name: "' ||
UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
END LOOP;
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
WHEN OTHERS THEN
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala -
How to create a single report using 5 difftent reports
Hi Experts
how to create a single report using 5 repors in it.
Example
I have to create a Survey history report using
Reports like Surevy 1
Surevy 2
Surevy 3
Surevy 4
Surevy 5
Please suggest me.
SantoshUse Analysis Process Designer (RSANWB) to feed each of the survey BEX reports to one DSO. Assuming each of the surveys has something in common to compare. Could also be used as a snapshot storage for the surveys in case history needs to be compared/archived.
Build the Direct update DSO with the survey objects. Add needed time characteristics and/or version control objects to the key.
Data sources will be the 5 surveys.
Add formula to hardcode version/time for history.
Data target is the direct update DSO.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/49/7e960481916448b20134d471d36a6b/frameset.htm
-SM -
How to create a table to use in webdynpro ABAP
Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
RaviHi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful -
How to create a packet by using java?
Hi, i am currently working on a research and i have some problems here.
1) how to create a packet by using java programming ?
2) How can i set the packet's information (e.g: packet's length, size of its header, etc) by using java?
I am currently in a midst of this now and i hope that someone is willing to correspond to my questions and help me out of it.
Thank you!I wan to create a customize packet where the user can
define the header size, the packet's length etc. in
the program......Then you get to write it to the connection yourself. Look at the OutputStream classes to see how to write low level output to a connection. -
How to create standby database by using duplicate
Dear all,
How to create standby database by using duplicate,is there some doc to read?Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios -
How to create a new material using a BAPI?
Dear friends,
How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
Thanks a lot!Dear,
New material can be created by using a BAPI_MATERIAL_SAVEDATA.
More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
Cheers
fareed -
How to create a adobe ebook using livecycle desinger ES3 version?
How to create a adobe ebook using livecycle desinger ES3 version
LiveCycle Designer is used for designing Forms, not eBooks.
The requirements of designing a book (ebook or otherwise) are not going to be meet by LiveCycle. You need functions like pagination and indexing.
A better choice would be to use InDesign, or even a word processor like Microsoft Word, and convert to PDF when finished.
You can read more about eBooks and the Adobe Digitial Publishing Platforms here: http://www.adobe.com/digitalpublishing/ebook/
At the bottom of this webpage are Resources which may help you understand the requirements of digitial publishing.
Hope this helps,
-Michelle
Maybe you are looking for
-
Error in Starting Managed Server
Hi, I have installed Oracle webcenter Portal 11g on my local machine. Started admin server successfully url: http://localhost:7001/console When i tried starting Managed server WC_Spaces,WC_Portlet,WC_Collaboration & WC_Utilities. Am getting error as
-
Output of select query in a single line
hi, I want to know how to get the each row in a table to be printed in a single line.. Each row in the table will be of 1500 characters length.. Thanks
-
Question on Installing 2 cert on CSS
Hi All, May i know if there is any limitation on the CSS not being able to install the server and root cert in 2 different files ? If yes let me know the procedure please? Thanks in advance.
-
I have updated to Itunes v11. Now I cannot start Itunes from my computer
I have updated to Itunes v11. Now I cannot start Itunes from my computer. I have tried clicking both on the short cut icon, the program file and the application file. The hour glass appears for a second then nothing. I have tried copying an audio di
-
Phone Stops Ringing When I pick it Up
Hello I have a Blackberry 9720. 1. I want to find out why my phone stops ringing when I pick it up to answer it? 2. How can I get it ring for longer as it rings for such a short time? Many thanks Barbara Solved! Go to Solution.