How to create an exclusion into an SCCM 2012 to not discover Non Windows OS

I assume they are in your AD. In that case your only option is to not discover them by not including their OUs in your
Active Directory System Discovery.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

SCCM 2012 is not discovering clients

Hi, I have a SCCM 2012 Primary Site. It is not discovering any computers with the AD System Discovery enabled. FYI:I am new to SCCM and it is installed on a Windows 2008 R2 Server.

OK, now I'm confused as you just did a 'me too' on the other posting, but the last part of the thread was about client installation. Now you created a new thread regarding discovery. So I guess it was a 'me too' for the discovery issue, not the client install
issue. This makes it really hard to see what to answer :-(
If AD System Discovery is not working, then usually what has happened is that people click the checkbox to enable the discovery method, but did not add a path for the method to discover from. So go back to the Properties of Active Directory System Discovery,
and verify that you have a path specified. If not, click the New button (looks like a gold starburst), and add the root of the forest (if that is appropriate). Then close the Properties dialog and run a full discovery cycle. It may take some time, depending
on how large the forest is. You can track it with the site server's adsysdis.log.
Wally Mead

Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows

I have an Acrobat plugin compiled in Visual C++ 6 using Acrobat 6 SDK. The plugin works flawlessly in Acrobat versions 6 to 9 in Windows XP. While the plugin is able to add a menu iterm and tool bar icon in Windows 7, it causes Acrobat to hang everytime when activated in which event I have to close Acrobat. Since Visual C++ 6 is a 32 bit app, I have to believe that Acrobat 6 SDK is responsible for the behavior described herein in attempting to get the plugin to work in Windows 7. Any comments or suggestions regarding what Visual C++ version to use along with the appropriate Acrobat SDK to get the plugin to work in Windows 7 are appreciated. In doing so, I would also be interested in knowing what backward compatibility one may expect w/regard to previous versions of Acrobat in updating the plugin to work in Windows 7. As for the answer, correct me if I am wrong but I'm thinking Acrobat 9.

Adobe hasn't supported Acrobat 6, VC6 or the Acrobat 6 SDK for at least 5 years. You will need to move to the Acrobat 9 SDK if you wish support.
And Acrobat 9 and its SDK are fine with Windows 7.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 1 Dec 2011 01:15:42 -0800
To: Leonard Rosenthol
Subject: Re: Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows
Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows
created by gomfp49<http://forums.adobe.com/people/gomfp49> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4056529#4056529

SCCM 2012 does not detect MS14-001 KB2837577 as required

SCCM 2012 does not detect MS14-001 KB2837577 (Security Update for Microsoft SharePoint Server 2010) as being required. I am able to install it manually. However, I would expect and like this to be deployed via System Center Configuration Manager.

Hi,
You might also need to analyze the updates installation logs on the client to see whether there are any useful information. (UpdatesStore.log, UpdatesHandler.log, UpdateDeployment.log and WUAHandler.log)
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to create an exclusive relationship in IE Data Model

Hello Experts,
How can I specify exclusive relationships in the IE Data Model? I have a PERSON and a ORGANIZATION entity. Both have a relationship to an ADDRESS entity. The ADDRESS entity can only have a relationship to either PERSON or ORGANIZATION. How is this situation modeled in the IE Data Model?
Thank you,
Carsten

Relationships in the IE Data Model method are between only 2 entities. There is no way to directly model a three-way relationship that you are trying to use. The alternatives for modeling it in the IE method would be to use a generalization structure on one end or the other. You could generalize Person and Org into a higher level concept (typically called Legal Party or just Party) and draw the relationship from the new Party entity to Address. Or, you could subtype Address as either a Person Address or and Organization Address and draw relationships from the new subtypes to Person and Organization respectivley.
You could also choose to just annotate it on the diagram using either text or a graphic object.

How to create a liveworkstation details in sccm 2007

HI how to create query to find the live work station details for last 30 days?

There are several example on my old blog site.
http://smsug.ca/search/SearchResults.aspx?q=30+days
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to manage Work group Computer through SCCM 2012 R2

Hello..Experts,
We have to manage the Workgroup Computers both Linux and windows Environment through SCCM 2012 R2.
what are limitation associated with managing Workgroup computer both with Linux and windows Computers through SCCM.
Please help us how to achieve this.

Windows devices that are Workgroup members have the same features for management as domain joined devices except that it is slightly more difficult to get the client installed on these 'unmanaged' devices.
The Linux computers have only basic support for Inventory, Application Management, and Compliance.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

How to determine linked reports of a SCCM 2012 Report

Hi,
My end objective is to get the SQL statement for a report - 'Deployment that target a computer'.
I can see SQL statements through Data sets in Report Builder. those SQL Statements are accepting few parameters from some linked report i believe. I want to determine the values of those linked parameters.
let me know how can we check what are the linked reports for a particular report in SCCM 2012
Sonam Rastogi

You could open a Report in Report Builder, right click on one of the field in the Report and click properties. There under Action you should see if the field is linked to another report.

How do Virtual Applications get published in SCCM 2012

SCCM 2012 Virtrual applications are deployed, icons appear on desktop and appear to be installed according to the Application Management Client console. However the SCCM2012 AppDiscovery.log states "Required component is not published".
We are running MS Application Virtualization Desktop Client is V4.6.3.25171. Where can I find the publishing errors?

Only find Dll, exe files and some XML files there.
I do see in the CCM\log\AppDiscovery.log the following:
<![LOG[ Performing detection of app deployment type PRU-VAPP_U_ATTRouteIt131-A - Microsoft Application Virtualization 4(ScopeId_756A69C5-BB0D-442E-BC79-54E767A8B034/DeploymentType_1acd73db-4883-43c9-90b2-ac044ed12dd8, revision 3) for
user.]LOG]!><time="13:38:29.891+300" date="12-04-2014" component="AppDiscovery" context="" type="1" thread="936" file="appprovider.cpp:2148">
<![LOG[Required component [Route It! 1.0.0.1] is not published for S-1-5-21-31572-1897081133-3783826585-2300]LOG]!><time="13:38:32.730+300" date="12-04-2014" component="AppVHandler" context="" type="1"
thread="936" file="appvhandler.cpp:584">
<![LOG[+++ AppV application not discovered for S-1-5-21-31572-1897081133-3783826585-2300 [AppDT Id: ScopeId_756A69C5-BB0D-442E-BC79-54E767A8B034/DeploymentType_1acd73db-4883-43c9-90b2-ac044ed12dd8, Revision: 3, AppV Pkg GUID: {D699AA09-CA0E-4774-A5D6-BBD97496FA69},
AppV Version GUID: {AC834D03-3524-43A3-B5FC-8ED6FE3079E1}]. Some required components are not published.]LOG]!><time="13:38:32.730+300" date="12-04-2014" component="AppVHandler" context="" type="1"
thread="936" file="appvhandler.cpp:224">
<![LOG[+++ Did not detect app deployment type PRU-VAPP_U_ATTRouteIt131-A - Microsoft Application Virtualization 4(ScopeId_756A69C5-BB0D-442E-BC79-54E767A8B034/DeploymentType_1acd73db-4883-43c9-90b2-ac044ed12dd8, revision 3) for S-1-5-21-31572-1897081133-3783826585-2300.]LOG]!><time="13:38:32.730+300"
date="12-04-2014" component="AppDiscovery" context="" type="1" thread="936" file="appprovider.cpp:540">
But I don't know why all the components are not getting published.
I have the icons for this app on the desktop and my ID is in the uninstall collection. The uninstall collection says:
SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User inner join SMS_G_System_AppClientState on SMS_R_USER.UniqueUserName = SMS_G_System_AppClientState.UserName where SMS_G_System_AppClientState.AppName='AppV
- ATTRouteIt131-A' and SMS_G_System_AppClientState.ComplianceState = 1
But it seems like the AppDiscovery.log does not think the app is installed. Everytime I run the Application Deployment Evaluation Cycle on the client the AppDiscovery.log shows it trying to install. And since it does not think the app is
installed, the uninstall does not seem to run. I know I am missing something as I have many apps that act this way.
Hope you can help!

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2: Build and Capture - Windows 8.1 prompting for network

I have upgraded my SCCM 2012 SP1 (CU2) to SCCM 2012 R2 and I am attempting to Build and Capture Windows 8.1 Enterprise. Everything is perfect except for the OS prompting for a network selection during the process, if I click "next" on that screen
the Capture finishes without incident. The same is true of the Deploy as well...
Is this a bug from my upgrade?
Portland Public Schools / Systems Administrator II

Hi LillonelC
Can you point out how and where to do this?
When capturing with MDT 2013 on VMware I do not see this, naturaly, since the "machine" only has one network adapter.
But when deploying to a Laptop I get the wireless Setup screen...
On beforehand Thank You!
With kind regards
We aren't using MDT but what we did was create a package called Windows 8.1 - Compnents. In it placed a file named "32Bit-Unattend.xml" and 1 named "64Bit-Unattend.xml".
During the capture in the "Apply Operating System Image" I put a check in the box "Use an unattended or Sysprep answer file for a custom installation". The package was Windows 8.1 - Compnents the File name was "32Bit-Unattend.xml".
I did the same for 64-bit and used the 64-bit version.
Here is content of the 32-bit file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
</OOBE>
</component>
</settings>
<cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x86/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Here is the content of the 64-bit file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
</OOBE>
</component>
</settings>
<cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x64/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
If that doesn't help I can try to clarify it a bit further.
PS You won't need to do this for the deploy, only the capture.
Portland Public Schools / Systems Administrator II

SCCM 2012 does not find the last signature of SCEP

Hi, we have installed SCCM 2012 with SCEP as our antivirus, all clients use the SCCM to download the signature, the alternate sources has been unmarked, and only we have selected SCCM and WSUS to download the updates.
In SCCM 2012 we have created the ADR to search and download ForeFront EndPoint Protection 2010 Security Updates. The server downloads the packages everyday at 01:00 a.m. (local time) and start to distribute to all DP at 03:00 a.m. The clients start to retrieve
when they are switched on or from 08:00 a.m. and verify new signatures every hour from them.
But the clients have the SCEP client update to 2 or 3 days ago! When we check the packages downloaded we note that the last package was not downloaded. This is the problem what we have. How can we solve this?
Raulito

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you confirmed that your ADR is running correctly?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 OSD; Not finding driver package during deployment

I've been having some trouble setting up my OSD deployment using SCCM 2012 and hope someone can point me in the right direction. Specifically I am having trouble with device driver deployment while deploying my reference image.
I am running SCCM Config Manager 2012 SP1 CU2. This is running on a Server 2012 VM with SQL 2012.  I am building an OSD deployment and have successfully captured my reference image. I am not sure if it matters, but I manually built a reference
PC and using capture media (USB stick), I successfully captured my reference image. I have imported my drivers for the target PC into Config Manager and into a driver package. The driver package has been deployed to the distribution point
(DP).  I checked the status of the driver package within the console and verified it has been deployed to the DP.   I created a new task sequence (TS) to deploy the captured wim. Within the TS, I added an "Apply
Driver Package" step and pointed it to the aforementioned driver package. I added a WMI query to the step as follows
select * from Win32_ComputerSystem where Model like "HP Probook 6570b%."
Incidentally, I did a wmi query on the target PC to verify the model. I deployed the TS to the unknown computers collection and PXE booted the target PC. I ran through the OSD wizard and while OSD is verifying the deployment prerequisites,
the deployment fails with the error, "The task sequence cannot be run because a package referenced by the task sequence could not be found." I checked the smsts.log log and found the following:
Failed to find CCM_SoftwareDistribution object for AdvertID="CT120043", PackageID="CT100044", ProgramID="*"
After some research I found this error means Config Manager cannot find the driver package (PackageID="CT100044")
for deployment. After more research I have done the following:
Deleted the Driver Package and recreated it and updated the TS step to point to this package.
Deleted and recreated the TS along with the driver package.
Recreated the driver package and distributed content, only importing the NIC drivers as a way to make a simple test.
When distributing content I verified it was successfully completed each time as per the console.
Each time I recreated the driver package and the OSD failed, smsts.log is showing the appropriate package ID in the error. If I disable the Apply Driver Package step and configure a Apply Device Drivers step to install the best matched compatible drivers
and limit the driver matching to the specific driver package, the OSD completes but the drivers do not install. It is as if Config Manager is not seeing the imported drivers at all.
I have run out of options to try and hope someone can help point me in the next direction to take.  After reading numerous forums and guides, I am sure I am doing the OSD steps correctly but I am apparently missing something.
Thanks in advance,
Mike G.

Thanks for responding.
Yes after I posted the question I right-clicked on the driver package, and selected to update distribution points. I checked now (about 12 hours later) and the package is showing it has not finished updating. I checked the content status and
it is "waiting for content." I looked at distmgr.log and I found an error "Failed to start DP health monitoring task for package 'CT100044'. Error code: -1". This error would occur every 30 min after each time the DP retried to process
the package. After some research I found a post stating a file called "Microsoft" or "Program" on located on the root of the site server could cause this and renaming or deleting the file would resolve this. I renamed the file and after the next time
it retried, the error cleared, however the package status is still waiting for content. I tried doing a validation on the package but so far there has been no change.

SCCM 2012 Console Not Saving Customizations

I am actually unsure of whether this is by design or if I am just doing something wrong. That being said, I am using the console for Management of SCCM 2012 and whenever I close the Admin Window all of the changes I have added to the console are gone.
For example I added "Last Infected Threat" and "Last Infection Time" to my devices view and it works great. Close the app and re-launch and it is gone.
Am I just battling against the design of the software, or is it supposed to save settings?
Thanks,
Portland Public Schools / Systems Administrator II

More info:
How to Create a Configuration Manager Console Custom View
http://msdn.microsoft.com/en-us/library/hh948614.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to create an exclusion into an SCCM 2012 to not discover Non Windows OS

Similar Messages

Maybe you are looking for