How to create an "exit widget" button on iAd producer.

I am creating a widget for a children's book and would like to create a simple "exit button" (an X the reader can touch to close the widget). Thus far I have created the object, but i can't seem to find an an 'action' to associate with the "activated" event that will close the widget and return to the iBook. I realise that a widget can alternatively be closed with a two-finger gesture, but for simplicity in view of my target audience prefer to have the "exit button". Note: I am relatively new to iBooks Author, and totally new to iAd producer. Unfortunately I don't know how to script in Java or HTML yet, but am willing to learn. Can anyone please give me some pointers?

Thanks! The button didn't appear in the preview in iAd producer, so I didn't realize it was there. But I tried my widget in iBooks Author and the button is there. Thanks again!

Similar Messages

How to create a new push button in application tool bar in GMGRANT thru BDT

Dear SAP Gurus -
We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
We went through a lot of documents on BDT but do not have a proper solution.
Could you please help.
Thanks in advance.
Regards,
Atul Mohanty

hi,
You can find user-exits (menu exits) to add new menu item.
But, there is no possibility to add new buttons on application tool bar.
Regards,
Sailaja.

How to Create Menu Exit

Hi,
Please tell me steps for how to create Menu Exit. Please Help me

MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
There are 'only' 177 Menu exits in standard - I couldn't see the right one, too.
But you could search the implemented exits, this should be only a small number. Go to transaction CMOD, enter * and F4, information system (F5), show all selections (Shift+F7) and then you can restrict to search only menu exits.
Of course there is the possibility, that these are added in a different way...
... at least you can be sure, if it's a normal menu exit.
Check this sap help..
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.sapbrainsonline.com/TUTORIALS/default.html
You can achieve this functionality by configuring in IMG.
Please find the info regarding User-Exit's in the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Re: doubt on user exits
user exits and Badis
User exits is the enhancements provided by SAP
You can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z.. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundeled in enhancement packages . Neverthiless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding .
Some examples of userexits in SD(SALES & DISTRIBUTION ) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved.This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits .
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1)MENU EXITS
2)FUNCTION EXITS
3)TABLE EXITS
4)SCREEN EXITS
5)KEYWORD EXITS
6)FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit , it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code . These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any tupe of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its compnents the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components . In the components you will see the exit EXIT_SAPMV45A_002 . This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04 . This include will be used to write our custom code .
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object ,select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created , sold-to-party field will come up with a predefined customer .
FIELD EXITS
The field exits are managed,created,activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is :
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3 , We can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
Reward points Please ...

How to create menu exits?

hi experts can anyone tell how to create menu exits?

Check these links:
http://help.sap.com/saphelp_bw21c/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
MENU EXIT
MENU EXIT
please explain me menu exit
Rohit

How to create dropdown box, radio button,check box in wad

Hi,
How to create dropdown box, radio button,check box in wad.
Thanks,
cheta.

Cheta,
This are all standard Web Items in the WAD. Drag them onto your template and then make the changes you need to them in their Properties.
Regards
Gill

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

How to create the Exit Variable

Dear all,
I want to create the exit Variables for query.
But How to create the exit variables.
Dose Anyone could share some document?
Thanks
Best regards,
Leon

Hi,
Check this out:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
assign points if useful ***
oops this is for authorization in BW reports***
anyways keep this,.. it may be help for you though this may not answer your Qn. on exit variable.
Thanks,
Raj
Message was edited by: Raj

How to create customer exit variable

Hi guys,
please any one can help for how to create customer exit variabel.
Regards.

Hi!
welcome to SDN.
its very simple.just go to Bex query designer. there u can use the following <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm">Link</a> to create a variable.. but use the processing type user exit.
after that go to transaction SE37 in BW and opent he function module EXIT_SAPLRRS0_001
and in that there is a include ZXRSRU01.... just double click on it and edit that...
there u can write code for your variable ,...for example write code inside
case "ZMY_VARIABLE"
*code for ur variable
endcase
u can use the following
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm">link for help</a>

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

How i create popup menu when button onclick

how i create popup menu when button onclick

You try adding a scrip tag in your jsp code, and calling the function in the onclick attribute.
Example:
<script><![CDATA[
                function confirmDelete(){
                if(confirm("Are you sure you want to delete selected user")){
                return true;
                } else{
return false;
]]></script>
<ui:button action="#{View.delete_action}" binding="#{View.delete}" id="delete" onclick="confirmDelete"/>
Cheers
Daniel
null

I am trying to include some widgets into my website through iweb.How to keep only the widget button on the homepage instead of the whole open widget?

I found the HTML code for including the Facebook widget buttons on my webiste...now I also wanted to include some other widget so I looked at www.widgetbox.com....I can download the html code and once I put that on my webpage then I have the widget open. How can I only have the widget button instead? For example I wanted to have the weather widget, but only the button weather widget, as if it was on the iphone, so that user can click on it just if they want, but I couldn't manage to do it. Does anyone knows?

Add an HTML snippet and put the code in it:
Click to view full size
OT

How to create subpicture for a button?

Hello!
I have really tried to find the answer to this rather silly problem on my own, but without result. Please help someone!
The situation:
I have a menu with three choices: "Play Movie", "Scene Selection" and "Subtitles". Now, the text presenting these choices are part of the background image, created in Premiere (the program I know best). They are written with an old typewriter to get that gritty feeling.
I want the user to scroll between these "menu items". The currently selected item should be indicated by a black circle/spot/dot before the text of the item. By default, when the menu appears, there is a black circle in front of (to the immediate left of) the item "Play Movie". The user should now be able to step with his/her remote to the other items, thereby making the black circle in front of "Play Movie" disappear and appearing instead before some of the other items. In short: the black circle is always showing before the currently selected item. OK, I got a bit verbose there, but the idea got across hopefully. One more thing: the background color is 100% white.
Up to this point, my solution was this: I placed black circles (small images with gradation and all, very nice looking) in front of ALL THREE ITEMS. Then I convert these into buttons. Then I choose the color set for the menu so that the unselected state is 100% white, plain and simple, with 100% opacity, thereby covering the black circles that should not show. Only in the selected and activated states does opacity for the button subpicture drop to 0%, thereby revealing the black circle that should be seen.
The problem? Well, on some DVD-players (not on the XBOX 360 though), when an item is activated, all three circles show for a brief moment before the selected action starts (for example playing the movie). It also happens in Encore Preview. This is not logical at all and looks amateurish. I don't know why it happens, but my guess is that it wouldn't if I did this the "correct" way: by creating subpictures fo the buttons in the shape of circles. I understand the nice looking gradations must go out the window but that is a price I'm willing to pay.
But now I run into an unexpected problem: I don't understand how to create a subpicture for the button that is a black circle. It seems the documentation in Encore and on forums in general takes for granted that you know how to do this.
What I tried ws this: I created a monochrome, small image in bmp format - a black circle on white background. But this image just shows up as a black rectangle in Encore.
What should I do? I should add that I have no real experience with Photoshop, so go slow if you go there.
Regards,
Nikolaj

Basically, when one realizes the limitations of the Sub-picture Highlights, as set by the DVD-specs., it's easy to see the "workaround."
A couple of the aspects of Sub-picture Highlights are:
1.) 2-bit color (either ON, or OFF), from a limited color palette, with degrees of Transparency (the opposite of PS's Opacity).
2.) they will appear on top of anything else on the Menu, including things like Button text/graphics.
By constructing your Sub-picture Highlight in PS, you can use Masking to define where it will be, and where it will not be. In the case that prompted my article, the poster had a series of Text Buttons, and the Sub-picture Highlights were formed from that Text. The poster did not like the look of those 2-bit jagged blocks of color overlying the Text in the Button. The workaround is to "punch a hole" in the Sub-picture Highlight, so that it is hollow, where the Button's Text appears. This is done in PS, by using the "outline" of that Text to create a Mask for the Sub-picture Highlight. The jagged aspect can be adjusted a bit, by using a degree of Transparency (set in the non-Auto Color Set back in Encore). We still have a 2-bit color Sub-picture Highlight, and it still overlays the Button's Text, but now there is a hole in it, right where the Button's Text is located, and it is seen through that hole. The introduction of Transparency has the visual effect of "softening" the look of the 2-bit color, even though the jagged edges are still there - they just look softer. I went on to show how one could even use a second Sub-picture Highlight, that is just a bit larger than the first, and with more Transparency to simulate a "glow." Now, we cannot have a real "glow," because we are limited to that 2-bit color for the Sub-picture Highlight, but we can simulate it.
Much of what a designer does is really slight of hand - illusion. They all have to work within the limitations of the DVD (or BD) specs., but with a bit of creativity, planning and some work in PS and Encore, they can create enough smoke and use enough mirrors to fool the user into believing that what they think they see skirt the DVD-specs. They do not, but that's where the illusion comes in.
We get a lot of questions from people, who claim that one commercial DVD, or another, has full-color Sub-picture Highlights and they complain that Encore cannot do that - only 2-bit Sub-picture Highlights. What they are seeing, but do not realize it, is a dupe Menu, with a full-color graphic, and no real Sub-picture Highlight visible. Jeff gives full details on doing this. Same for those who have seen a Button with a duo-tone thumbnail, that turns full-color, when the Button is navigated to. Wow, how did they do that, and why can't Adobe Encore do that? Well, what they saw was a dupe Menu, with a full-color thumbnail and no visible real Sub-picture Highlight.
Jeff shows how to create what appears to be at least a 3-color Sub-picture Highlight. It's really just 3 regular 2-bit color Sub-picture Highlights, with Masking to create the illusion that he beat the DVD-specs. Neat! [Being from the USA, I also liked that he used the US flag, but he could have chosen the French "Tri-color," or any other flag, without artwork.]
These are all just tricks, but if the user buys into the illusion, who's to know?
Enjoy,
Hunt
PS - though many of the great, older posts were lost, when the forum changeover happened, I strongly suggest reading the posts here. You can bypass ones that do not offer you anything, but almost every possible illusion has been discussed at least one time, and likely many, with some different workflows offered by those, who replied. Great reading.

How to create a exit buttom in my mobile application in html5

Please i want to create a exit button for my android aplication on dreamweaver my app is in html5 i need the code for create this

Hi pofpofines45,
Can you check out this discussion in the time that the other experts get back to you?
http://stackoverflow.com/questions/5023954/javascript-ok-exit-button
Thanks,
Preran

How to create user exit search help

Hi,
I have created a search help from se11 with a field (PT9653-ZDOCENTE) of table control.
Now I want to fill another field (PT9653-ZMATERIA) of table control when the user select a value in the search help.
How do I do it?
I read that I must use a user exit, is it correct?
could you give me some examples?

I have created a exit that should upgrade the second field with the function
    dynpvaluetab2-fieldname = 'PT9653-ZDOC_TXT'.
    WRITE wa_nome TO dynpvaluetab2-fieldvalue.
    dynpvaluetab2-stepl = sy-stepl.
    APPEND dynpvaluetab2.
    CLEAR   dynpvaluetab2.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname     = 'MP965300'
        dynumb     = '2000'
      TABLES
        dynpfields = dynpvaluetab2.
but it is not work.
Instead, if the first use F4IF_INT_TABLE_VALUE_REQUEST to see the search help and then the DYNP_VALUES_UPDATE to update the other fields work.
SELECT objid stext FROM hrp1000
    INTO CORRESPONDING FIELDS OF TABLE tab_materie
WHERE plvar EQ '01'
   AND otype EQ 'ZM'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'OBJID'
      dynpprog        = sy-repid
      dynpnr          = '2000'
      dynprofield     = 'PT9653-ZMATERIA'
      value_org       = 'S'
    TABLES
      value_tab       = tab_materie
      return_tab      = tb_ret_conc
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE s000(zh) WITH 'Non trovati record per questa selezione'.
ENDIF.
GET CURSOR FIELD pt9653-zmateria LINE riga_corrente.
READ TABLE tb_ret_conc INDEX riga_corrente.
REFRESH dynpvaluetab.
dynpvaluetab-fieldname = 'PT9653-ZMATERIA'.
WRITE tb_ret_conc-fieldval TO dynpvaluetab-fieldvalue.
dynpvaluetab-stepl = riga_corrente.
APPEND dynpvaluetab.
CLEAR   dynpvaluetab.
READ TABLE tab_materie WITH KEY objid = tb_ret_conc-fieldval.
dynpvaluetab-fieldname = 'PT9653-ZMAT_TXT'.
WRITE tab_materie-stext TO dynpvaluetab-fieldvalue.
dynpvaluetab-stepl = riga_corrente.
APPEND dynpvaluetab.
CLEAR   dynpvaluetab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = dynpvaluetab.
bold The problem is that for this field, I need a collective search help , and therefore I can not use the F4IF_INT_TABLE_VALUE_REQUEST. bold

How to create a 3-state button (similar look as OK button) that toggles between 3 different colors.

How do I create a 3-state button that looks similar to the OK button except it changes to 3 different colors every time it is pressed. Does anyone have such a control ready for use that I can just drop in my front panel?

With a picture ring you can implement a 3 color button without any code. Look at the attached customized control.
I have imported the picture of a boolean in three different items and
colored them. I centered the text and hide/made transparent uneeded
graphic elements. I set the size of the decrement arrow to cover all
the picture and made it transparent so when you click on the control
you decrement the value of the ring and change the picture/color
Edit: you'll notice that the picture is not fullt covered by the
decrement arrow so if you click near the bottom of the button, the
picture ring will show its normal behavior displaying all 3 available
items
Message Edité par Jean-Pierre Drolet le 07-07-2005 10:07 PM
LabVIEW, C'est LabVIEW
Attachments:
3COLORSBUTTON.vi ‏8 KB

How to create an "exit widget" button on iAd producer.

Similar Messages

Maybe you are looking for