How to create an import develop preset

If it can be done, does anyone know how to create an import preset that will automatically turn on lens profile correction or remove chromatic aberrations quickly when I import photos?

If using LR5 that may course LR/computer to run slow and even stop. Seems to effect some more than others. I removed lens correction from my import preset and that has seemly solved all my slowness dramas
I only do lens corrections when exporting or sending files to PS/Nic and only if I really have to in editing. After exporting I remove the lens correction from the raw file.

Similar Messages

How do I remove invalid develop presets

Hi.
I've had Lightroom on my Mac for quite some time. I've gone through periods where I use it, then periods where I don't. In one of those iterations, I somehow got a list of develop presets that are not valid.
When I go to the develop section, I have about a dozen preset folders. In my [~/Library/Application Support/Lightroom/Develop Presets] directory, I have just 4 folders that I just created this morning for a new preset group I just bought. Unfortunately, the other items inside Lightroom are causing Lightroom to give an error "The file could not be found" and will not let me open or close the folders nor remove the ones that do not exist.
How do I clean up that list and get rid of the invalid items?
In case they're built-ins, the list that is not in my Application Support directory are:
Lightroom B&W Filter Presets
Lightroom B&W Presets
Lightroom Color Presets
Lightroom Effect Presets
Lightroom General Presets
Lightroom Video Presets
If I can get those back, that'd be even better.
Thanks in advance.

OK, I deleted my Lightroom settings and life is good again.
I followed the instructions here:
http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file

How to create a custom Project Preset Premiere Elements 9?

Hi,
In the help documentation of Premiere Elements 9 it says that i can create a new Project Preset: "The procedure for creating a preset differs if you’re changing settings for an open project versus establishing settings for a new project. Presets you create can be applied to new projects, and if you want to back up or distribute preset files, you can find them in the Settings subfolder of the Adobe Premiere Elements folder on your hard disk." (url).
Sadly, i can't find the specific instructions that would help me to establish settings for a new project and save it.
Thanks in advance for any help.
Jorge

Steve,
Below is the spec of the footage. I get this info using "VideoSpec". The thing I can't match a preset Full HD 1080i 60(59,96).
Thanks again.
*** Video Track Parameters ***
- Format: H.264/MPEG-4 AVC
- Size: 25.3 MiB (99%)
- FourCC: H264
- Track number(s): 0
- Bitrate: Max.: Undefined
   Average: 17508 Kbps
   Min.: Undefined
- Frame rate (fps): Max.: 59.960
   Average: 59.940
   Min.: 59.920
- Bitrate mode: Variable
- Encoding profile: [email protected]
- Resolution: 24 bits
- Width (Pixel number): 1920
- Height (Pixel number): 1080
- Pixel Aspect Ratio: Undefined
- Display aspect ratio: 16:9
- Chroma subsampling format: YUV420p
- TV standard: Undefined
- Interlacing: Interlaced - Top Field First
- Encoding library: Undefined
- Additional Parameters: CABAC: Yes
   Reference Frames: 4
*** Audio Track(s) Parameters ***
- Format: AAC - MPEG-4 audio
- Size: 190 KiB (1%)
- FourCC: MP4A
- Number(s) and language(s): 2: English
- Details: -
- Profile: Low Complexity
- Bitrate: 128 Kbps
- Bitrate mode: Constant
- Resolution: 16 bits
- Rate: 48.0 KHz
- Channel(s): 2 (stereo)
- Position: Left Right
- Encoding Library: Undefined
- Additional Parameters: Spectral Band Replication: No

How to Create and apply adjustment preset for printing

How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

How to create production and development enironment in same server

Hi All,
We are using OWB10.2.0.1 version and we have only one database which has two schema.we are using default control center to run the mappings.
We don't have separate servers for development and production.So we use same control center for running the mapping for production and development, cause of this we are getting some problem while changing the existing mapping.
So we are planing to separate these environment like production and development with in one server and both environment should have the same database and we need to lock the some mapping to development environment which is in live.
Please suggest me how can i follow because i don't have EXP in these area.Hope you understand the situation.
Thanks,
Kumar.

Hi,
I am not sure if we can lock the mapping according tot he env. you log into. I can provide an alternate solution by using different project names and store the mapping into them or using different mapping names to indicate them as prod or dev maps.
From a developer perspective i would suggest u have different environments for dev and prod and as a manager i would like to inform that u have have many audit issues if this goes on.
Regards,
Bharath

Create Rule in Developer studio

Hi,
I am new to endeca and i am creating rule in developer studio, can anybody tell me how to create rule in developer studio.
Thanks
Shailesh

Hi Madhavan,
the reason why SAP has chosen to implement Java into WebAS has several aspects. The differences between ABAP and Java are a good one, but more important was the fact that the market today concentrates very much on standardization. If you want to sell a platform to enterprises today it has to be one out of two and that is J2EE or .NET.
While it is accepted that a good product comes in a proprietary language, people who have to deal with it definitely prefer to use a standard environment for development of extensions and enhancements.
This way, we could say that Java may even enhance ABAP's life cycle into ages that are beyound our view today. What definitely can be said today is that your knowledge of ABAP is still a long term investment, while Java is on the way to set the dust, meaning: keep an eye on it and follow further development on the market -some Java technologies are fully developed now, some otheres are still under discussion.
Regards,
Benny

Where are all the Develop Presets located?

In the Develop Preset folder (Vista: C:\Users\Howie\AppData\Roaming\Adobe\Lightroom\Develop Presets) there are only a few presets listed instead of all the creative and sharpening presets as seen in the Quick Develop "saved preset" drop down. Where are all the other presets located?
Note: my goal is to look at each creative preset to see just what settings are being applied.

Don - that is not what he is asking.
Howie - I have no idea where they are stored on Windows - from a quick exploration I guess they are in the Application .exe file. On the Mac you can get into this, but I'm not sure you can on a PC
However the simplest thing to do is Apply a Preset and Note what is does in the Develop Module. That will be what the Preset is trying to do.
Alternatively Apply the Preset and Create a New Preset with a Different Name, it will have the same settings.
Richard Earney
http://inside-lightroom.com

Import using develop presets won't work!

Hi all,
I just upgraded from LR2 to LR3. A lot to hate in this new version. But I suppose one needs to adjust and no doubt I will, but there is one thing that is about to drive me up the wall. Something I haven't been able to fix, so here I am, looking for a bit of help.
Here's the problem:
Because I don't like Lightroom's Sharpening & Noise Reduction settings, I used a preset in LR2 that I applied automatically when importing my images into LR. Now, with Lightroom 3 this just won't work properly and I get exclamation marks, indicating those images are not in the 2010 develop environment. I realised I was using my old presets, created in LR2, so that made sense. So I first deleted all my old presets and to make sure, I also deleted my metadata preset that I also apply on import. I couldn't find a way to delete those presets from within Lightroom by the way. So I just went to the library and trashed them manually...
Next:
I open LR3. Now I have no user presets anymore, of any kind. I then import the first image of today's shoot. In the develop module I make sure that I'm working in the 2010 process environment. I set Sharpening and Noise Reduction to what I want them to be and make them a preset. Then I made another preset for my metadata. But after importing the rest of today's shoot with the presets I have just created, it will not accept the 2010 settings and I get the exclamation mark with every image. I have checked that the culprit is not the metadata file. If I use only that to import an image and leave the Develop Settings on None, all is well, and the image is regarded as being in the 2010 process state. If I then *manually* apply my earlier created Noise Reduction/Sharpening preset, it accepts it and all is well. But as soon as I try to apply that same preset again when importing my images, then, when I go to the develop module, the image is suddenly in the 2003 environment again and I get the exclamation marks. I have tried everything I can think of but I cannot escape it any longer: I have been defeated by Lightroom 3. What on earth am I doing wrong here? Anybody?

Yes, I get the same thing with the sliders being greyed out. Funny thing is that the sliders *are* set exactly as in my preset and when I click 'yes update' to 2010 standards, the settings don't change but only the sliders become accessible. The thing is that I really don't want to be doing that with every import, even if you can do the whole batch at once. What I don't understand is that when I import with the preset turned off and apply it in Lightroom's Develop Module, it accepts it without a problem but that when I use the same preset on import, it won't work properly.
Now what the poster in the other thread said was:
"When I saved a new preset and selected to also save the process version, a line in the preset was created: ProcessVersion = "5.7". When I cut and paste that into all my other presets then the sliders were all active when I used them."
I have no idea what he is talking about or how one would do that. When I create a preset I simply click the + sign and in the pop up window select what I want, give it a name and that's it.
Edit: Sorry, I apparently overlooked the Process Version box in the preset panel! Must have been a case of not seeing the forest for the trees. Problem solved. Thanks.

FAQ: How do I migrate my saved presets from an earlier version of Photoshop or import/export them?

You now have the option to migrate presets from a previous version, export presets and to save to a directory as a zip file (great for instructors).
Preset Migration migrates your saved presets, not your preferences. The message says "Would you like to migrate presets from the following versions?" It simply carries on the preset files you have already saved (things like Brush Tips, HDR Toning presets, Curve presets, Styles etc.) to CS6.
HOW TO USE PHOTOSHOP CS6 AUTOMATED PRESET MIGRATION
Photoshop CS6 offers the great new functionality of automated preset migration for your custom presets from Photoshop versions as far back as CS3.
When Photoshop CS6 launches for the first time, it checks for previous installations of Photoshop on the computer to see if there are custom presets that need to be migrated. Photoshop looks in each of these presets folders for your saved custom preset files that it can migrate.
Preset migration script copies all the files in user preset folders of older versions. If there are more than one preset files with the same name, presets from the newer version will be given priority. These types of presets will be migrated by the script:
3DLUTs, Actions, Black and White, Brushes, Channel Mixer, Color Books, Color Swatches, Contours, Curves, Custom Shapes, Deco, Duotones, Exposure, Flash 3D, Gradients, HDR Toning, Hue and Saturation, Levels, Lighting Effects, Lights, Materials, Meshes, Optimized Colors, Optimized Output Settings, Optimized Settings, Patterns, Render Settings, Repousse, Scripts, Styles, Tools, Video, Volumes, Widgets, Zoomify, and Workspaces
If this is not your first launch and you would like Photoshop to look for presets,
Choose Edit > Presets > Migrate Presets
When Photoshop notices that you have custom presets saved in their appropriate folders it will give the message "Would you like to migrate presets from the following versions?"
Choose Yes. Photoshop will begin the preset migration script.
When the migration has completed Photoshop will pop up another message saying:
"Preset files from older versions successfully migrated"
In order to use your newly migrated presets, you must restart Photoshop.
If you had Photoshop CS6 beta installed and have saved custom presets, you will need to export those presets before uninstalling the previous version and installing the release version of Photoshop CS6.
HOW TO SAVE PRESETS
For PS, check that you have saved all your presets using:
Edit>Preset Manager... (in previous versions) Edit>Presets>Preset Manager... (in CS6)
HOW TO IMPORT AND EXPORT PRESETS
In the main PS menu,
Choose Edit > Presets > Export/Import Presets
In this dialog you can export the presets and then import them when you load the new version using the same Export/Import dialog.
If you have gone through the automated preset migration and notice that some of your presets didn't get migrated with the rest, make sure you have exported your presets to their default folders.
PRESET FILE LOCATIONS:
(Note that there are two different folder locations for presets, one for application provided default presets, and one for user created preset files)
These are the presets that are unique to each user on the computer. These can be migrated automatically: (this is the location that the user should save their personal presets in)
Windows: Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS6/Presets
Mac: Users/[Username]/Library/Application Support/Adobe/Adobe Photoshop CS6/Presets
These are the default presets that ship with Photoshop. These presets can be imported but will not copy over using the migrate feature because each version of Photoshop will install defaults for that version.
Windows 64 bit:
    [Hard Drive]:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Presets
WindowsXP and Windows7 32 bit:
      [Hard Drive]:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Presets
Mac:
    [Hard Drive]/Applications/Adobe Photoshop CS6/Presets
Frequently used preset filename extensions:
ABR Brush preset
ACO Swatch preset
ASL Style preset
ATN Action preset
CSH Custom Shape preset
GRD Gradient preset
PAT Pattern preset
SHC Contour preset
Here is a helpful tutorial:
http://tv.adobe.com/watch/learn-photoshop-cs6/preset-migration-and-sharing/

Do you have an iPhoto Library from the old machine? If you have then simply open it - there's no importing involved.
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
If you don't have an actual library there is no way to do what you want.
Regards
TD

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

Develop Preset for Import in LR4.2 (iMac 10.8.2)

Can any please tell me how to set up a preset on the Import page (there are some there now) that I can use when I import my photos into LR. I am tired of going to Lens Correction in the Develop mod to put the nikon lens in that I used for the shoot. It is always turned off and I would like to have it activated when I import my shots. I know that while in the Develop mod, I can change it for one photo and then use "sync" to have it address all the other photos. But then it is a pain in the butt. There must be a way of doing it on import and that is the reason I am asking for your help. Either that or else have it recognize the lens that I used automatically.
Thanks for taking the time to respond.
Tunney
Tunney Moriarty
Ph: Res 519-746-0236
Cell 519 584-5253

Hi Tunney,
I would second JimHess: of course you could employ a develop preset during Import, but then all images would be labelled as having develop adjustments. And you do not see where you have invested develop work already.
I consider the Adobe defaults just as a starting suggestion, which may or may not apply to my taste per camera.
So I would rather tweak the default develop settings: just make sure that you include only stuff that virtually applies to ALL of your images.
I, too, have included automatic lens correction and defringe edges.
First decide in your catalog settings if you want the develop defaults specific per camera type or serial number or even ISO ( a nightmare if you ever use auto-ISO).
Then select a sample image, goto develop module and set only the stuff that should apply to all imported images. Then save them as new default settings.
You do nit change anything during import then.
If you hit the Reset button it will always revert to these defaults.
Cornelia

How to create a Project in Development system?

Hi,
I am starting my development on client system.
Whenever i try to create infoarea or cube or catalog or whatever it is asking for request.
before creating request, Project must be created plz tell me how to create a project?
whats the relation between project and package?
And one more question...if i want to avoid asking requests then what settings must be done so that after all development is over i can transport to quality system at time.
PLZ provide me the solution for above mentioned queries.
Thanks in Advance,
Vijaya.

Thanks Tony.
Please tell me in details or send me a document regarding this...what shoud be done in SE06.
Here there are 2 options:
1)Standard installation
2)Database copy or database migration.
and there s a option system change option.
I am not getting the idea of this what can be done by clicking on system change option and perform post installation actions?
plz help me out.
Thanks,
Vijaya

How to create package and import from jar file?

Hi all,
I am writing a software and I am not sure how to create a package for the classes.
Say I have two classes in the same directory as follows:
testA.java
==========
package AB;
public class testA
public static void main(String[] args){
     testB myB = new testB();
     System.out.println("A test");
testB.java
===========
package AB;
public class testB
public testB(){
     System.out.println("B constructor");
both file compile without the package heading;
both file compile using: javac -classpath .\ *.java
Question 1:
I cannot run testA by: java -classpath .\ testA
I think it is a syntax error. What is the correct one?
If I run testA by: java testA
The only output I get is: A test
But I am expecting: B constructor /n A test
What went wrong?
Question 2:
I need to use APIs of another software. I have downloaded a .jar file (xxx.jar) with all the classes in it. And I have put "import xxx.*;" in my source file. But the compiler complains about the importing. What is the right way to copmile it?
I have read a couple of tutorials but they don't answer my question.
(I am using windows2000 and don't have the classpath variable.)
Hope some one can help.
Thanks a lot

Try moving testA out of the package and importing 'AB.*;'
If you have:
./testA.class
./AB/testb.class
Then to execute testA from ./ type: java -cp . testA

How to create Development Class in SAP R/3 4.7c and Netweaver?

I follow some old notes on ABAP Development Class but I could not create a new Development Class. i.e. Stuck in creatinf a type group. Please give some details on how to create a development class. Thanks.
see the following stepa:
(A) Procedure for creating a type group:
/nse80
1. Object Navigator> select Development class>(Enter your development class
   yFTGxxDEV
2. Double click on development class object types.
3. Type Group: zPTAxx1.
4. Click on the Create button at the bottom (4th one from the left).
5. Enter short text: zPTAxx1 type group.
6. Save>Enter your development class> click on diskette button to save the type group
7. Select Source Code tab and enter the following:
"An example type-pool statement containing types and constants
type-pool zxx1. "zxx1 is a type pool. It is also known as a type group
types: zxx1_dollars(16)    type p decimals 2,
             zxx1_lira(16)          type p decimals 0.
constants:
       zxx1_warning_threshold type i value 5000,
       zxx1_amalgamation_date like sy-datum value '19970305'.
8. Select Type Group from menubar
           a) Check
           b) Save
           c) Activate
9. Click the back button or F3 to exit.
10, Show your type group to your teacher.
11. Go to ABAP editor and enter the following program:
"Calculations on date
report zxx_0914.
type-pools zxx1.                   "contains zxx1_amalgamation_date
data:    d1              like sy-datum,
            d2              like d1,
            num_days type p.
d1 = d2 = sy-datum.
subtract 1 from d1.
write / d1.                              "yesterday's date
d2+06 = '01'                         " first day of current months
subtract 1 from d2.
write / d2.                           " last day of previous month
num_days = sy-datum - zxx1_amalgamation_date.
write / num_days.                " number of days since amalgamation
11. Double click zxx1 from the type-pool statement to see the type group.
12. Follow lab1 procedure and run your program
(B) Run an ABAP program using field symbol ( i.e. pointer)
report zxx_lab6.
data f1(3) value   'ABC'.          "Step 1 Define a variable
field-symbols <f>.                     "Step 2 Define a pointer variable ( it only stores address)
assign f1 to <f>.                        "Step3 Initialize the pointer variable with an address
write <f>.                                    "Step4 Now you can use <f> in place of f1
write / f1.                                      " (same as write f1 )
<f> = 'xyz'.                                   " Assign a new value to f1
write <f>.
write / f1.

This is not the way to create a new development class.
Follow this steps to create a development class:
http://sap.mis.cmich.edu/abap4/knowbase/Create-Dev-Class.pdf
Regards,
Naimesh Patel

How to create an import develop preset

Similar Messages

Maybe you are looking for