How  to  create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype   in   sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me  the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

Similar Messages

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • HOW TO CREATE A VARIABLE IN SAP SCRIPT

    HI ALL,
    CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
    THANK YOU,
    BYE
    TAKE CARE.

    Hi Ravi,
    You can use like this
    A text in the editor contains the following DEFINE commands:
    /: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
    &mysymbol&
    /: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
    / &mysymbol&
    The printed text appears

  • How to creat purchase register in SAP r/3 system?

    Dear All,
    Please tell me how to creat purchase register in sap R/3 system.

    HI
    I think there is no standard functionality in sap u need to develop with abaper help with proper logic
    if it is for venijula s_alr_87009936  try this t.code
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

  • Proceedure of how to create a logo in SAP R/3

    Dear Techie's,
    Please tell me the Proceedure of how to create a logo in SAP R/3 and how to include in the ALV.
    I suppose its to be included in the ALV_comentary_write function module.
    Please guide me in full.
    Regards,
    -=Virendra=-

    HI,
    Please follow below steps
    (1)Create a class name
    SBDSV1 (TRANSACTION) --> New Entries --> Class name (SOME NAME) --> Class type (OT).
    2)After entering the above details and saving, the fields Class object name fields   will be blank, make entries as shown  below .
    1)     Class : BDS_LOC1
    2)     Class : BDS_POC1
    3)     Class : BDS_REC1
    4)     Object name : BDS_CONN00
    3)- Now next time logging in to OAOR you can directly refer to this Class name.
    4)1)     Go to transaction OAOR, give the class name created.
       2)     Give class type as OT
       3)     Give some name in object key it’s like sub folder
    5) a) Click on create drag down standard doc types will get no. of option chose one
        b) double click on the class name in this new screen.
        c)in the below screen are, you have tabs for  details,documentinfo,keywords,create, click on create TAB,
       d)By double clicking on screen you can browse the folder where image is located and select it
       e)Once the image is selected it will be stored in the folder that is created with object key
    6) now double click on the image you uploaded & in below screen area select the Details tab, you will get object id,use this object id & code as below
    7)form FILL_EVENTS .
    DATA: wa_events TYPE SLIS_ALV_EVENT.
    CLEAR: LS_EVENTS.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       IMPORTING
         ET_EVENTS             = LS_EVENTS
    wa_events-form = 'STD_TOP_OF_PAGE'.
    MODIFY ls_events FROM wa_events TRANSPORTING FORM WHERE NAME =
    'TOP_OF_PAGE'.
    CLEAR: wa_events.
    endform.                    " FILL_EVENTS
    FORM STD_TOP_OF_PAGE.
    DATA: it_listheader TYPE SLIS_T_LISTHEADER,
           is_listheader TYPE SLIS_LISTHEADER.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary       = it_listheader[]
         I_LOGO                   = 'ZTEST'  "this is object id mentioned in 6 step
        I_END_OF_LIST_GRID       =
      ENDFORM.
    Regards,
    Raghavendra

  • How to create report writer in sap?

    Hi Anybody,
      I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
    anybody please tell me with example?
    Thanks
    Regards,
    S.Muthu.
    IT Dept.

    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

  • How to create a condition in sap

    Hi all,
    How to create a condition in sap
    i want to create a condition in sap quotation. how to solve this issue please give me idea step by step.
    [http://www.4shared.com/document/MQiBd3bP/screenshot.html]
    Thanks & Regards
    Ambrish
    Edited by: ambrish dwivedi on Feb 28, 2011 12:29 PM
    Moderator message: not related to ABAP development, please do some research before asking.
    Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

    Hello Ambrish,
    Which condition are you talking about ?
    is it the calculation you want to do in ur driver program or kind of routines which are used in Pricing ?

  • How to create user groups in SAP

    Hello Gurus,
    Can anyone let me know how to create user groups in SAP-HR Module and who will be creating  the user groups.
    plz provide me the steps.

    Hi Stephanie,
    IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
    Please refer the below links:
    http://scn.sap.com/thread/1653026
    http://scn.sap.com/thread/1682721
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
    Thanks,
    Madhav.

  • Sap script '' how to create table frame in sap script"""

    i have some problem in sap script''  how to create table frame in sap script"""

    Hi,
    you can use BOX command..
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
    1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
    3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
    4. FRAME: Thickness of frame.
    Default: 0 (no frame).
    5. INTENSITY: Grayscale of box contents as % .
    Default: 100 (full black)
    Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    • TW (twip)
    • PT (point)
    • IN (inch)
    • MM (millimeter)
    • CM (centimeter)
    • LN (line)
    • CH (character).
    The following conversion factors apply:
    • 1 TW = 1/20 PT
    • 1 PT = 1/72 IN
    • 1 IN = 2.54 CM
    • 1 CM = 10 MM
    • 1 CH = height of a character relative to the CPI specification in the layout set header
    • 1 LN = height of a line relative to the LPI specification in the layout set header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shadowing having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    check the fallowing link also
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
    Mark the points if u find it useful...
    Regards,
    Omkar.

  • How to create a map in SAP BI???

    Dear SAP BI Experts,
    I have a difficulties to make a map in BI and missed the steps procedure how to create a map.  I have an ESRI CD Map and Arc VIew application.  What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
    So sorry for stupid question!!!
    Thank you very much for your time and help.
    Best Regards,
    Rudy (SAP BI Team)

    Hi Nirmansyah,
    Please check the below link.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
    Hope this helps.
    Veerendra.

  • How to create interactive map in SAP Visual Business using SAP UI5 SDK

    Hi,
    Please tell me,
    How to create interactive map in SAP Visual Business using SAP UI5 SDK.
    Is it possible to create interactive map using VB Control in SAP UI5 SDK..?
    if possible please any one let me know.

    Hi folks, one question:
    We have our development close moved and now it is earlier than originally planned. 
    That means that we maybe can't finish our convenient API and you have to wait till we will release it - early 2015 is planned.
    But there is another option:
    Currently we have a API based on json. The developer has to create json and  to transfer it to the Visual Business control.
    This interface is more used as a low level API and we are developing on top the more convenient one. So all the features are the same.
    It will stay stable & compatible in the future and you can build on it.
    Do you want to use this interface?  
    Then I will publish the documentation.
    Let me know.
    Thanks

  • How to view Index fragmentation in sap ecc6 ?

    how to view Index fragmentation in sap ecc6 ?

    Hi Haimiao,
    You can use brtools to get required information. For relevant steps use the link below
    https://help.sap.com/saphelp_nw04/helpdata/en/08/5742154ae611d1894f0000e829fbbd/content.htm
    Regards,
    Deepak Kori

  • How To create a rebate in SAP relating to a product group (3 digit). ??

    How To create a rebate in SAP relating to a product group (3 digit). ??

    Client requiremnt he has sent a mail to me -:
    Kim (from Benelux) wants to create a rebate in SAP relating to a product group (3 digit).
    We have seen that we can make rebates on product id, product line (2digit) and on material group (4 digit).
    Can you please check if this is possible? If not, is a LRFC enough?
    Thanks Br
    Gaurav Vazirani

  • How to create an Infotype in OM

    Dear all,
    Can any one please let me know How to create an Infotype in OM.
    thanks
    abdul

    Hi ,
    To create OM infotype:
    1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
    2. Go to PPCI and enter Infotype number (9XXX) and description.
    3. Click create.
    4. In the infotype category select details for the infotype.
    5. Click create button. It should create the infotype.
    6. Click on Check. A window with menu will open.
    7. In that window navigate to Table Entries.
    8. Under table Entries, select T777I and click on change.
    9. It opens SM30. Click on Maintain.
    10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
    11. Save.
    12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

  • How we create custom infotype and how to configure with its subtypes.

    hai abap-hr gurus,
    how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
    plz help me for this with an example code.
    thanks..
    kiran kumar

    Hi Kiran,
        Please fallow the below steps to create the custom infotype. If you have any quires let me know.
    For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
    then select the `Employee Infotype' radio button
    after that select the `PS Structure Infotype'
    then click on Create… A separate table maintenance window appears
    then Create a PS structure with all the fields you want on the infotype
    Save and Activate the PS structure
    now Go back to the initial screen of PM01
    Click on `All' push button. It takes a few moments
    Click on `Technical Characteristics’. Infotype list screen appears
    Click on `Change'(pencil) button
    Now select your Infotype and click on `Detail' (magnifying glass) button
    Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
    Give your subtype field as subtype field & Save and come back to PM01 initial screen
    Click on `Infotype Characteristics' … Infotype list screen appears
    Click on `Change' (pencil) button & on New Entries
    and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
    to fill yours). Now save ur entries
    Now the Infotype is created and ready to use.
    If you want to change the layout of the Infotype as per your
    requirement…
    In the PM01 initial screen…Select `Screen' radio button and give
    2000 as the screen name, then click on edit.
    In the next screen.. Select `Layout Editor' and click `Change'.
    Screen default layout appears…here you can design/modify the
    screen..change the attributes of the fields..etc.
    Save and activate. (Don't forget to `Activate at every level)
    Regards,
    Ramakrishna kotha.

Maybe you are looking for