How to create an instrument from .wav samples

I have a .exs file and samples that I downloaded from
http://www.phunkynutts.com/steeldrum.php
I am trying to get these to work as an instrument. I know that the Rhythm Jam Pack has Caribbean Steel Drums and they sound OK but there's no way to get a roll, which is an important part of steel pan playing. These samples include rolls.
What I did, which didn't work, was
1. Put the .exs file in place
2. Drop the samples in a folder with the same name
3. Edited the carribean steel drums .cst file to reference the above and saved it with the proper name.
The instrument shows up but it plays piano, not the samples. My instrument isn't in the drop-down menu to change it. If I change it to AuAudioFilePlayer and select my samples, the samples play within the instrument "preview" window but not when using the keyboard. What do I need to do to make it work?

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

Similar Messages

Fastest Way To Create Ultrabeat Instrument From Wav Loop?

Hello, can anyone share the fastest way to create and instrument from a WAV file?
I know you can convert a wav to ESX24 instrument but I use Ultrabeat not ESX.
Im finding my self divinding each shot into region and then exporting that to its own file.
Is there a faster/simpler way?
-Thanks

You're right! It does work, however, if you follow these steps:
1. Right-click on wave file in Arrange and choose "Slice at Transient Markers" or use the corresponding key command.
2. Select all the split regions right-click on them and choose: Convert > Convert to new audio file(s)
3. Again, with all the regions selected choose: Convert to new sampler track.
4. Now launch Ultrabeat. Click on the Import button anc choose the .exs file you've just created (will be located in your project folder). Then drag the audio files into UB as desired.
You could skip Part 3 altogether and simply slice at transients, convert to new audio file(s) and then in a new kit of UB drag them into the sample window of OSC for each part...

How to create session id from different string controls

how to create session id from different string controls

fais,
Please create the VI you are talking about and save some default data into all of the controls. Also on the front panel, place the session ID that should be generated by that data. Now, post your VI to a response so I can download it. I can then take this VI and help you create the functionality. (Please post what version of LabVIEW you are using.)
My guess it that you are going to need to use a good number of string concatenations as well as a few string indexes to get parts of strings out. As for the date, you can use a Property node with the Numeric Text.Text property to get the actual string displayed on the front panel for the date and parse out the parts that you want.
Randy Hoskin
Applications Engineer
National Instruments
h
ttp://www.ni.com/ask

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

How to create an invoice from multiple sales doc.

Hi,
how to create an invoice from multiple sales doc.
thanx,
sourav

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

How to create set hierarchies from FI SL.

Hi Experts,
How to create set hierarchies from FI SL. Could you please tell me
Step by step procedures or send to this mail id [email protected]
Thanks
Regards,
Sathis.J

Hi,
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Hope This Helps.
Thanks,
Sankar M

How to create database link from oracle to sql server

Please help with how to create database link from oracle to sql server
Best regards,
Vishal

Please help with how to create database link from oracle to sql server
Best regards,
Vishal
Hi Vishal,
I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
Regards,
Elvis Long
TechNet Community Support

How to Create adf table from java bean

Hi,
How to Create adf table from java class (Not from ADF BC).
Thanks
Satya

@vlsn -- you have to follow what shay said.
Do the following in Model layer ::
create a table property java class with your columns setters and getters like :
*public class gridProps {*
private int sno;
private String orderNum;
*public void setSno(int sno) {*
this.sno = sno;
*public int getSno() {*
return sno;
*public void setOrderNum(String orderNum) {*
this.orderNum = orderNum;
*public String getOrderNum() {*
return orderNum;
Create another table java class which will populate the values to your column values and return the collection :
*public class gridPopulate {*
private List<gridProps> gridValues ;
*public List<gridProps> setToGrid(ArrayList<ArrayList> valuesToSet) {*
*if (valuesToSet == null) {*
return gridValues;
gridValues = new ArrayList<gridProps>();
if(btnValue.equals("completeBtn"))
return gridValues;
for(ArrayList<String> tempArr:valuesToSet)
gridProps gp = new gridProps();
gp.setSno(Integer.valueOf(tempArr.get(0)));
gp.setOrderNum(tempArr.get(1));
return gridValues;
Right click gridPopulate class and create this as data control.This class will be seen in Data control list.Under this data control,Drag the grid property collection(created earlier) to your page.Then execute your binding(gridPopulate) according to your logic.
Thanks.(My jdev version 11.1.1.5.0)

How to create chord charts from midi using logic pro x

How to create chord charts from midi using logic pro x

Depending on what you mean by Chord charts (Tabs?)
Use the Score.......
http://help.apple.com/logicpro/mac/10/#lgcpf755d649

How to create dll file from c code to use in compactrio 9004 RT controller

Hi.
I am using Compactrio 9004 Real time controller and i am new to this. I have a C code and i want to use this with the RT controller.I red that that can be done by creating a dll file and can be called in labview.Can any body expalin how to create a DLL from the c code and be used with this RT controlelr?
Regards,
Vishnu

vishnu123 wrote:
Hi,
Earlier in this forum itself in cRIO 900x controllers will run Pharlap and run C/C++ code compiled into .dll files.Can you please tell how to transfer the created DLL to RT controller memory throght FTP?
Thanks and regards,
Vishnu
There is another KB article about this for Pharlap based controllers. And you are right the earlier CompactRIO controllers were Pharlap based. Basically for a deployed application to work, you need to put the DLL through FTP in "/ni-rt/system". If you deploy it directly from the project everything will be loaded into memory through the project environment itself including directly dependable DLLs, (but of course won't survive a power cycle).
I hope you are aware that while Windows DLLs can work on Pharlap OS they by no means will do so always. The Pharlap OS has not a fully featured Windows API. Also you need to be careful which version of Visual C you are going to use depending on the Pharlap OS version, since the VC runtime DLLs already present on the controller will need to be the same as the ones your Visual C environment likes to link in. Recent Pharlap OS versions use the msvcr71.dll. It's very possible that those runtime libraries can't just simply be copied from a normal Windows installation but might have been recompiled by NI specifically for their controller targets.
So to avoid problems it's a good idea to make sure your DLL uses the same runtime library DLL or make your DLL to include the static MS runtime.
Rolf Kalbermatter
Message Edited by rolfk on 02-05-2008 09:51 AM
Message Edited by rolfk on 02-05-2008 09:53 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to create Default Schema from within the application

Hi friends
I am creating users using the following within my application using this syntax
BEGIN
APEX_UTIL.CREATE_USER
(:P124_USER_ID, :P124_USER_NAME,:P124_USER_FIRST_NAME,:P124_USER_LAST_NAME,' ',:P124_USER_EMAIL_ID,'xxxx');
END;
The default workspace for the user is set as blanks. I would like to set it to be the default workspace as per the current logged in user.
Can you help me with the syntax for this
thank you in advance
Laxmi

Laxmi,
The subject of the post is "How to create Default Schema from within the application".
But your question asks how to set the "default workspace" for a newly created user.
Those are different questions and not the ones I think you need answered.
Let me answer this question "How can you set the default schema for an account when creating the account and set it to the same value used for the default schema attribute of the administrator account used to authenticate to the currently running application?".
In the apex_util.create_user call use named parameter notation and fetch the information about the currently logged-in user first, e.g.,declare
l_workspace               varchar2(256);
l_user_name               varchar2(256);
l_first_name              varchar2(256);
l_last_name               varchar2(256);
l_web_password            varchar2(256);
l_email_address           varchar2(256);
l_start_date              varchar2(256);
l_end_date                varchar2(256);
l_employee_id             varchar2(256);
l_allow_access_to_schemas varchar2(256);
l_person_type             varchar2(256);
l_default_schema          varchar2(256);
l_groups                  varchar2(256);
l_developer_role          varchar2(256);
l_description             varchar2(256);
begin
apex_util.fetch_user (
p_user_id                  => apex_util.get_current_user_id,
p_workspace                => l_workspace,
p_user_name                => l_user_name,
p_first_name               => l_first_name,
p_last_name                => l_last_name,
p_web_password             => l_web_password,
p_email_address            => l_email_address,
p_start_date               => l_start_date,
p_end_date                 => l_end_date,
p_employee_id              => l_employee_id,
p_allow_access_to_schemas => l_allow_access_to_schemas,
p_person_type              => l_person_type,
p_default_schema           => l_default_schema,
p_groups                   => l_groups,
p_developer_role           => l_developer_role,
p_description              => l_description);
apex_util.create_user(
p_user_id        => :P124_USER_ID,
p_user_name      => :P124_USER_NAME,
p_first_name     => :P124_USER_FIRST_NAME,
p_last_name      => :P124_USER_LAST_NAME,
p_email_address => :P124_USER_EMAIL_ID,
p_web_password   => 'xxxx',
p_default_schema => l_default_schema);
end;Scott

Creating new instruments from soundfonts:

Hi all,
I'm still pretty much a newbie with GarageBand and have been working with it recently by using midi files imported into the program and selecting different instruments to get a more pleasing arrangement, with the aim of making my own custom backing tracks. I have followed Hangtime's excellent tutorial and made some custom instruments from Sf2s downloaded from Hammersound and Fox-gieg. Now, the problem I have is this ... some of those custom instruments (annoyingly, the best ones usually) will not play when I reset to the start of the midi track but strangely, if I change to an instrument that will play (such as JamPack instrument) and play a short section and then change back to the custom instrument it will play (that's how I know it's a good sound by the way) ... but when I go back to the start of the track (midi file track, not audio recorded) then the pesky instrument will not play!! If I scroll back to just near the beginning of the track the instrument will play but if I go right back to the beginning of the track ,it won't play. I need the instrument to play right from the start in order for it to play all the way through when I then go to 'Share' and 'Export to Disc' to convert the file to m4a.
Hangtime, if you can throw some light on the problem I would be most grateful mate ... or anyone else on the forum for that matter. I would appreciate the help.
I have resolved a lot of my initial problems like the bass sounds being an octave lower when playing midi files (solution: use the pitch adjust in the edit section) and so on by referring to earlier posts in this excellent forum ... but I haven't come across this.
Best regards ... Rainbow32

Hi SoulRed12,
No worries, I'm glad to get follow up replies to resolve this one and I apologise to yoodler for not getting back but at the time ... I did not fully understand his reply as I did not (at the time) pick up on the reference to Dent du midi which is a freely available program which may be the solution to the problem. If you refer back a few pages to my earlier post re: tonewheel organ sounds not playing you will see this was resolved by using that program ... it was brought to my notice via Gary Sumak's reply and I am so grateful as this little program sorts the problem for those tonewheel organs but should also work with instruments created from soundfonts. It converts the midi track to aif and you then assign the software instrument of your choice from your menu (in this case the instrument you have created from your soundfont) and it should then play through each time correctly. It will only cure those soundfont instruments that are playing 'hit and miss' if you like ... it will not help those soundfont created instruments that yoodler mentions that 'do not take' and which may be caused by using GS files ... I don't know.
I spent a day a while back before posting this thread and downloaded lots of likely soundfonts and converted them ... gave myself repetitive strain injury to my wrist in my enthusiasm and then found that nearly all of those instruments did not actually 'take' or played intermittently and eventually gave up on the whole idea and removed them all. I have found that the Ben Boldt and AMG series of instrument expansion packs and the Jam Packs from Apple pretty much cater to my needs ... but for the odd instrument not available in those collections then it may well be worth downloading several soundfonts of that one instrument and using the Dent du midi program for any of those 'tricksters' that play 'hit and miss'.
Best regards ... Rainbow32:)

How to create an xml from xsd in abap

HI Experts,
i want to create an xml file from xsd and i want to validate an xml file against an xds.is this possible in abap.if it is possible can any one give me an sample code
for this one.
how to create an xml file in abap.i have seen so many blogs which parses the xml file but i didn't get blog for creating an xml file.how can we do that one.
any suggestions will be appriciated
thanks in advance
With Regards
Naidu

HI
GOOD
IT IS POSSIBLE IN ABAP
Extensible Markup Language (XML) is a simple, very flexible text format derived from SGML (ISO 8879). Originally designed to meet the challenges of large-scale electronic publishing, XML is also playing an increasingly important role in the exchange of a wide variety of data on the Web and elsewhere.
XSD->
XML Schemas express shared vocabularies and allow machines to carry out rules made by people. They provide a means for defining the structure, content and semantics of XML documents. in more detail.
XDS->
XDS can process data images from CCD-, imaging-plate, and multiwire-detectors in a variety of formats. Detector specific Input file templates greatly simplify the use of XDS; they are provided as part of the documentation.
XDS runs under Unix or Linux on a single server or a grid of up to 99 machines of the same type managed by the MOSIX system; in addition, by using OpenMP, it can be executed in parallel on up to 32 processors at each node that share the same address space.
http://www2.stylusstudio.com/SSDN/default.asp?action=9&fid=23&read=2926
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
THANKS
MRUTYUN

How to create CVI drivers from existing LabView HP816x.fp

I downloaded an instrument driver from the www.agilent.com; Instructions are provided to convert drivers for LabView from the provided HP816x.fp, however, I need to create them for LabWindows CVI.

If you downloaded Agilent 816x VXI Plug&Play Driver, you can use it in CVI immediately. You don't need conver anything for CVI. fp file is part of CVI driver.
In project window select menu item Instrument>>Load. Load the hp816x.fp. Add #include to your C code and you can use all function from driver.
Help about converting fp for labview describes how easy create LabVIEW driver. This convertion make llb file with VIs for every function from Fp panel. These VIs call functions from hp861x_32.dll. If you are using CVI you don't need do it. This help is only for LabVIEW users.
Zdenek

How to create an instrument from .wav samples

Similar Messages

Maybe you are looking for