How to create an internal table with a types structure?
Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
end of itab_1.
Thanks a lot,
Regards,
Rebeca
Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM
Similar Messages
-
How to create an internal table with fields from different sources
Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
field1 TYPE ztab-field1,
field2 TYPE ztab-field2,
*your own fields here:
field TYPE i,
field(30) TYPE c,
END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec -
How to create Dynamic internal table with columns also created dynamically.
Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
NaraI don't understand ...
something like that ?
* Form P_MODIFY_HEADER. *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
v_count(2) type n ,
v_date type d ,
v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
is_fieldcatalog-fieldname+0(3) eq 'VAL' .
move : is_fieldcatalog-fieldname+3(2) to v_count ,
p_perb2+5(2) to v_date+4(2) ,
p_perb2+0(4) to v_date+0(4) ,
'01' to v_date+6(2) .
v_count = v_count - 1.
call function 'RE_ADD_MONTH_TO_DATE'
exporting
months = v_count
olddate = v_date
importing
newdate = v_date.
if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
concatenate 'Quantité 0'
v_date+4(2)
v_date+0(4)
into v_buff.
else.
concatenate 'Montant 0'
v_date+4(2)
v_date+0(4)
into v_buff.
endif.
move : v_buff to is_fieldcatalog-scrtext_s ,
v_buff to is_fieldcatalog-scrtext_m ,
v_buff to is_fieldcatalog-scrtext_l ,
v_buff to is_fieldcatalog-reptext .
modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform. " P_MODIFY_HEADER -
How to create an internal table with header line in smartforms
Hello Guys,
I need to append the data in my internal table in smartforms by the problem is an error occurred "a table without header line and therefore no component called tdline"
i already declared the data under types declaration tab
types : begin of ts_tline,
TDFORMAT type tdformat,
tdline type tdline,
end of ts_tline.
types : it_tline type table of ts_tline.
and declare these in global data
WA_TLINE type TS_TLINE
XT_TLINE type IT_TLINE
my syntax in program lines :
LOOP AT gy_lines INTO WA_PROJ.
SPLIT wa_proj AT cl_abap_char_utilities=>cr_lf
INTO table IT_SPLIT.
LOOP AT IT_SPLIT.
MOVE it_split-commentext TO xt_TLINE-tdline.
an error occured at this part ****
append xt_TLINE.
ENDLOOP.
ENDLOOP.
what is wrong with my code..it cannot append data to xt_tline.
Please help.Will reward points
Thanks in advance
aVaDuDzcheck this link
this will help u......
http://www.****************/Tutorials/Smartforms/SFMain.htm
reward IF..........
regards
Anbu -
How 2 create dynamic internal table and can we pass it to gui_download FM
HI all,
How can we create a dynamic internal table?
I have a requirement where i have to create an internal table with the no. of fields depending on the selection screen values, i think tat can be possible though dynamic creation only.
How to solve this issue..?Pointers will be very much useful..
Thanks
Sunny.hi
Follow the code it will help you out....
REPORT YUSMM_TEXT2 .
*TABLES
TABLES: MARA, " General Material Data
MAKT, " Material Descriptions
T002. " Language Keys
* GLOBAL TYPE-POOL
TYPE-POOLS : SLIS.
* GLOBAL TYPES
TYPES: BEGIN OF TP_LANG ,
SPRAS LIKE T002-SPRAS,
LAISO LIKE T002-LAISO,
SRNO(3) TYPE N,
END OF TP_LANG.
TYPES: BEGIN OF TP_MATNR,
MATNR LIKE MARA-MATNR,
BEGRU LIKE MARA-BEGRU,
END OF TP_MATNR.
* DECLARATION FOR GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA:GT_MAKT TYPE STANDARD TABLE OF MAKT, "Materialkurztexte,
GT_THEAD TYPE STANDARD TABLE OF THEAD, "SAPscript: Text-Header,
GT_LINETAB TYPE STANDARD TABLE OF TLINE, "SAPscript: Text-Zeilen,
GT_T002 TYPE STANDARD TABLE OF T002. "Language key
DATA: BEGIN OF GV_TEXT_OUTPUT_LINE,
MATNR LIKE MARA-MATNR,
BEGRU LIKE MARA-BEGRU,
MAKTX LIKE MAKT-MAKTX,
LTXT40(1250) TYPE C,
SRNO(3) TYPE N,
SPRAS LIKE T002-SPRAS,
END OF GV_TEXT_OUTPUT_LINE.
DATA: GT_MATNR TYPE STANDARD TABLE OF TP_MATNR,
WA_GT_MATNR TYPE TP_MATNR.
DATA: GT_LANG TYPE STANDARD TABLE OF TP_LANG,
WA_GT_LANG TYPE TP_LANG.
DATA: GT_TEXT_OUTPUT_LINE LIKE STANDARD TABLE OF GV_TEXT_OUTPUT_LINE,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GV_FIELDCAT LIKE LINE OF GT_FIELDCAT,
CT_GT_FIELDCAT_IN LIKE GV_FIELDCAT,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GV_REPID TYPE SY-REPID.
DATA: BEGIN OF GV,
FORMER_ERROR LIKE SY-MARKY, " Fehlermeldung bereits
FILE_OPEN(1), " Flag open file
REC_LENGTH TYPE I, " record length
MATNR TYPE MARA-MATNR, " material
REPID TYPE SYST-REPID,
RETCO TYPE SY-SUBRC,
END OF GV.
DATA: GV_MAKT TYPE MAKT,
GV_T002 TYPE T002,
GV_LANGU TYPE THEAD-TDSPRAS.
* DECLARATION FOR FIELD-SYMBOLS
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: L_LT TYPE SLIS_LAYOUT_ALV.
DATA: WA_IT_FLDCAT TYPE LVC_S_FCAT.
DATA: WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: GP_TABLE TYPE REF TO DATA.
DATA: WA_NEWLINE TYPE REF TO DATA.
*DECLARATION FOR CONSTANTS
CONSTANTS:
BEGIN OF GC,
TDID_GRUN TYPE THEAD-TDID VALUE 'GRUN',
TDOBJECT_MAT TYPE THEAD-TDOBJECT VALUE 'MATERIAL',
ON(01) TYPE C VALUE 'X',
YES(01) TYPE C VALUE 'X',
TXT(25) TYPE C VALUE 'MATERIAL DETAILS',
MAT(25) TYPE C VALUE 'MATERIAL NUMBER',
AUT(25) TYPE C VALUE 'AUTHORIZATION GROUP',
FOUND TYPE SY-SUBRC VALUE '00', " Return-Code
RC_OK TYPE SY-SUBRC VALUE '00', " Return-Code
OFF TYPE SY-SUBRC VALUE '00', " return code
FALSE TYPE SY-SUBRC VALUE '00', " boolean
TRUE TYPE SY-SUBRC VALUE '01', " boolean
END OF GC.
* DECLARATION FOR VARIABLES
DATA: V(3) TYPE N,
STR TYPE STRING,
STR1 TYPE STRING,
V_VAR(3) TYPE N,
V_VAR1(3) TYPE N,
V_FIELDNAME(15) TYPE C,
V_CHAR(15) TYPE C,
V_LINES(3) TYPE N,
MAKTEXT LIKE MAKT-MAKTX,
LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA.
*SELECTION-SCREEN AND PARAMETERS
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
S_MATNR FOR MARA-MATNR, "MATERIAL NUMBER
S_MTART FOR MARA-MTART, "MATERIAL TEXT
S_LANG FOR MAKT-SPRAS. "LANGUAGE
PARAMETER: GP_SIZE TYPE I DEFAULT 200. "DATA LENGTH
SELECTION-SCREEN: END OF BLOCK A1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
* INITIALIZATION
INITIALIZATION.
GV-REPID = SY-REPID.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_MARA_DATA
TABLES
GT_TEXT_OUTPUT_LINE
USING
S_MATNR[]
S_MTART[]
GP_SIZE
CHANGING
GV-RETCO
PERFORM GET_MAT_TEXT
TABLES
GT_MAKT
GT_TEXT_OUTPUT_LINE
GT_THEAD
GT_LINETAB
USING
GC
GV-RETCO
CHANGING
GV_TEXT_OUTPUT_LINE
GV_MAKT
PERFORM GET_LANG.
PERFORM DYNAMIC_TABLES.
PERFORM POPULATE_FINAL_TABLE.
PERFORM POPULATE_DYNAMIC_TABLE.
* END-OF-SELECTION
END-OF-SELECTION.
PERFORM DATA_OUTPUT.
*& Form get_mara_data
* Materialdaten lesen
* <->ct_gt_text_output_line Ausgabetabelle
* -->it_s_matnr Parameter Materialnummer
* -->it_s_mtart Parameter Materialart
* -->if_gp_size Parameter Anzahl Materialnummern
FORM GET_MARA_DATA TABLES CT_GT_TEXT_OUTPUT_LINE STRUCTURE
GV_TEXT_OUTPUT_LINE
USING IT_S_MATNR LIKE S_MATNR[]
IT_S_MTART LIKE S_MTART[]
IF_GP_SIZE
CHANGING IF_GV-RETCO. "#EC *
* MARA in die Übergabestruktur einlesen
SELECT MATNR BEGRU
FROM MARA UP TO IF_GP_SIZE ROWS
APPENDING CORRESPONDING FIELDS OF TABLE GT_MATNR
WHERE MATNR IN IT_S_MATNR
AND MTART IN IT_S_MTART.
IF_GV-RETCO = SY-SUBRC.
ENDFORM. " get_mara_data
*& Form get_mat_text
* Kurz- und Langtexte zum Material lesen
* <->ct_gt_makt Materialkurztexte
* <->ct_gt_text_output_line Ausgabetabelle
* <->ct_gt_thead Kopftabelle für ALV
* <->ct_gt_linetab Zeilentabelle für ALV
* -->if_gc Globale Konstanten
* <--cf_gv_text_output_line Struktur Ausgabetabelle
* <--cf_gv_makt Struktru Materialkurztexte
FORM GET_MAT_TEXT TABLES CT_GT_MAKT STRUCTURE MAKT
CT_GT_TEXT_OUTPUT_LINE STRUCTURE
GV_TEXT_OUTPUT_LINE
CT_GT_THEAD STRUCTURE THEAD
CT_GT_LINETAB STRUCTURE TLINE
USING
IF_GC LIKE GC
IF_GV-RETCO
CHANGING CF_GV_TEXT_OUTPUT_LINE LIKE
GV_TEXT_OUTPUT_LINE
CF_GV_MAKT LIKE GV_MAKT
DATA: STRG TYPE STRING,
STRG1(1255) TYPE C.
IF IF_GV-RETCO = IF_GC-FOUND.
* Materialkurztexte in alles Sprachen einlesen
SELECT * FROM MAKT APPENDING TABLE CT_GT_MAKT
FOR ALL ENTRIES IN GT_MATNR "ct_gt_text_output_line
WHERE MATNR = GT_MATNR-MATNR " ct_gt_text_output_line-matnr
* Kurztexte in die sprachabhängigen Felder bringen
LOOP AT GT_MATNR INTO WA_GT_MATNR.
LOOP AT CT_GT_MAKT INTO CF_GV_MAKT
WHERE MATNR = WA_GT_MATNR-MATNR.
CF_GV_TEXT_OUTPUT_LINE-MATNR = WA_GT_MATNR-MATNR.
CF_GV_TEXT_OUTPUT_LINE-BEGRU = WA_GT_MATNR-BEGRU.
CF_GV_TEXT_OUTPUT_LINE-MAKTX = CF_GV_MAKT-MAKTX.
CF_GV_TEXT_OUTPUT_LINE-SPRAS = CF_GV_MAKT-SPRAS.
* LANGTEXT
CLEAR CT_GT_THEAD[].
CT_GT_THEAD-TDOBJECT = IF_GC-TDOBJECT_MAT.
CT_GT_THEAD-TDNAME = WA_GT_MATNR-MATNR.
CT_GT_THEAD-TDID = IF_GC-TDID_GRUN.
CT_GT_THEAD-TDSPRAS = CF_GV_MAKT-SPRAS.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = CT_GT_THEAD
I_READONLY = IF_GC-ON
IMPORTING
E_HEADER = CT_GT_THEAD
TABLES
T_LINES = CT_GT_LINETAB[]
EXCEPTIONS
NOTFOUND = 1.
IF SY-SUBRC = IF_GC-FOUND.
LOOP AT CT_GT_LINETAB.
STRG = CT_GT_LINETAB-TDLINE.
IF STRG1 <> ' '.
CONCATENATE STRG1 ';' STRG INTO STRG1.
ELSE.
STRG1 = STRG.
ENDIF.
ENDLOOP.
CF_GV_TEXT_OUTPUT_LINE-LTXT40 = STRG1.
APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
CLEAR CF_GV_TEXT_OUTPUT_LINE.
STRG1 = ' '.
ELSE.
APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDFORM. " get_mat_text
*& Form data_output
* Daten mit ALV ausgeben
* <->ct_GT_FIELDCAT Feldkatalog für ALV
* <->ct_gt_text_output_line Ausgabetabelle
* -->P_GS_LAYOUT Layout für ALV
* -->if_gc Globale Konstanten
* <--cf_GV_REPID Zur Zeit aufgerufener Reportname
* <--cf_gv_fieldcat Struktur Feldkatalog
* <--cf_gv Globale Variablen
FORM DATA_OUTPUT.
PERFORM FIELDCATBUILD.
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GV-REPID
I_CALLBACK_PF_STATUS_SET = 'EVENT_SET_STATUS_01'
I_CALLBACK_USER_COMMAND = 'EVENT_USER_COMMAND'
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " data_output
*& Form fieldcatbuild
* text
* --> p1 text
* <-- p2 text
FORM FIELDCATBUILD. " TABLES ct_gt_fieldcat_in STRUCTURE gv_fieldcat.
LOOP AT IT_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-FIELDNAME.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ENDFORM. " fieldcatbuild
* Form event_set_status_01*
FORM EVENT_SET_STATUS_01 USING LT_EXCL TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ABCD' .
ENDFORM. "EVENT_SET_STATUS_01
*& Form Name: event_user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM EVENT_USER_COMMAND USING
IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
PERFORM POPULATE_DOWNLOAD_TABLE.
DATA: L_LENGHT TYPE I.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:data.xls'
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TRUNC_TRAILING_BLANKS = 'X'
DAT_MODE = 'X'
IMPORTING
FILELENGTH = L_LENGHT
TABLES
DATA_TAB = <FS_22>.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_LENGHT NE GC-FOUND.
MESSAGE S398(00) WITH 'DATA downloaded to c:data.xls'.
ENDIF.
ENDCASE.
ENDFORM. "event_user_command
*& Form get_lang
* text
* --> p1 text
* <-- p2 text
FORM GET_LANG.
SELECT SPRAS
LAISO FROM T002 INTO CORRESPONDING FIELDS OF TABLE GT_LANG
WHERE SPRAS IN S_LANG.
DESCRIBE TABLE GT_LANG LINES V_LINES.
LOOP AT GT_LANG INTO WA_GT_LANG.
V = V + 1.
WA_GT_LANG-SRNO = V.
MODIFY GT_LANG FROM WA_GT_LANG TRANSPORTING SRNO.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
CONCATENATE 'MATEDESC-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-INTLEN = 40.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO IT_FLDCAT .
CLEAR WA_GT_LANG.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
CONCATENATE 'BASDAT-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-INTLEN = 255.
WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO IT_FLDCAT .
CLEAR WA_GT_LANG.
ENDLOOP.
V_FIELDNAME = 'MATNR'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Matnr'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 1.
V_FIELDNAME = 'BEGRU'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'BEGRU'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 2.
ENDFORM. " get_lang
*& Form dynamic_tables
* text
* --> p1 text
* <-- p2 text
FORM DYNAMIC_TABLES.
ASSIGN LT_DATA TO <FS_DATA>.
* Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
* Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
ENDFORM. " dynamic_tables
*& Form populate_final_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_FINAL_TABLE.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
READ TABLE GT_LANG INTO WA_GT_LANG
WITH KEY SPRAS = GV_TEXT_OUTPUT_LINE-SPRAS.
IF SY-SUBRC EQ GC-FOUND.
GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
ENDIF.
MODIFY GT_TEXT_OUTPUT_LINE FROM GV_TEXT_OUTPUT_LINE.
ENDLOOP.
ENDFORM. " populate_final_table
*& Form populate_dynamic_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DYNAMIC_TABLE.
DATA: INDX TYPE SY-TABIX.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
AT NEW MATNR.
INDX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-MATNR.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-BEGRU.
ENDAT.
LOOP AT GT_LANG INTO WA_GT_LANG.
IF GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + 2.
ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-MAKTX.
V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-LTXT40.
ENDIF.
ENDLOOP.
AT END OF MATNR.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
ENDLOOP.
ENDFORM. " populate_dynamic_table
*& Form LAYOUT
* text
* --> p1 text
* <-- p2 text
FORM LAYOUT.
CLEAR L_LT.
L_LT-ZEBRA = GC-YES.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = GC-TXT.
ENDFORM. " LAYOUT
*& Form populate_download_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DOWNLOAD_TABLE.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
* Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
DATA: STRN1 TYPE STRING,
STRN2 TYPE STRING,
INDX TYPE SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-MAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-AUT.
LOOP AT GT_LANG INTO WA_GT_LANG.
V_VAR1 = WA_GT_LANG-SRNO + 2.
CONCATENATE 'MATERIALDESCRIPTION-' WA_GT_LANG-LAISO INTO STRN1.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = STRN1.
V_VAR1 = WA_GT_LANG-SRNO + V_LINES + 2.
CONCATENATE 'BASICDATA-' WA_GT_LANG-LAISO INTO STRN2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = STRN2.
ENDLOOP.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
APPEND <LWA_LINE_WA1> TO <FS_22>.
V_VAR1 = 0.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
AT NEW MATNR.
INDX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-MATNR.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-BEGRU.
ENDAT.
LOOP AT GT_LANG INTO WA_GT_LANG.
IF GV_TEXT_OUTPUT_LINE-SRNO EQ WA_GT_LANG-SRNO.
V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + 2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-MAKTX.
V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
* STR = GV_TEXT_OUTPUT_LINE-LTXT40.
* SEARCH STR FOR ';'.
* DO.
* IF SY-SUBRC = 0.
* SPLIT STR AT ';' INTO STR1 STR.
* <FA> = STR1.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
* SEARCH STR FOR ';'.
* CLEAR <LWA_LINE_WA1>.
* ELSE.
* EXIT.
* ENDIF.
* ENDDO.
* <FA> = STR.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
<FA> = GV_TEXT_OUTPUT_LINE-LTXT40.
ENDIF.
ENDLOOP.
AT END OF MATNR.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
ENDFORM. " populate_download_table
thanks
Nitya -
Dynamicly creating an internal table with header line
Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping. -
Creating Dynamic Internal table with a dynamic name
Hi,
I want to create dynamic internal tables with dynamic names.
For example:
Suppose I have a table with three fields.
1. Structure name
2.Fields
3.file
And the structure of the internal table is as follows:
TYPES:BEGIN OF table_type,
struct TYPE char70,
fields TYPE tt_type OCCURS 0,
File TYPE ttab_type OCCURS 0,
END OF table_type.
Suppose I have one record inside my internal table with struct as "STRUCTURE", fields have an internal table content of set of fields and File has some set of records.
Now I want to create dynamic internal table whose name will be "STRUCTURE" , the fields of the dynamic internal table structure[] will be as in fields, and the records will be as in File.
Like this if i have 100 records in my internal table then I have to create 100 dynamic internal table dynamically.
Can anyone suggest how to do this?
Edited by: Jjammy on Jul 22, 2009 7:52 AMHi,
Check the sample program and develop your program accordingly.
<font color=blue><pre>
REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS:
slis.
*Types
TYPES:
ty_fcat TYPE lvc_s_fcat,
ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
wa_fcat TYPE ty_fcat,
wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
it_fcat TYPE STANDARD TABLE OF ty_fcat,
it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
it_dyn_tab TYPE REF TO data,
wa_newline TYPE REF TO data.
*Filed symbols
FIELD-SYMBOLS:
<gt_table> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY,
<l_field> TYPE ANY.
*Variables
DATA:
l_fieldname TYPE lvc_s_fcat-fieldname,
l_tabname TYPE lvc_s_fcat-tabname,
l_fieldtext TYPE lvc_s_fcat-seltext,
l_index TYPE char2.
"Selection-screen
PARAMETERS:
p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
DO p_colms TIMES.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = sy-index.
ENDDO.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_fcat INTO wa_fcat.
PERFORM fieldcatalog1 USING: wa_fcat-fieldname
wa_fcat-tabname
wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZTEST_NOTEPAD'
it_fieldcat = it_fcatalog
TABLES
t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
DO p_colms TIMES.
CLEAR l_index.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'Field' l_index INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat
IMPORTING
ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1 </pre>
</font>
Thanks
Venkat.O -
How to read an internal table with more than one (2 or 3) key field(s).
how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version
hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
matnr like marc-matnr,
werks like marc-werks,
pstat like marc-pstat,
end of itab.
data: begin of itab1 occurs 0,
matnr like mard-matnr,
werks like mard-werks,
lgort like mard-lgort,
end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
werks
pstat
from marc
into table itab
where matnr = p_matnr.
sort itab by matnr werks.
select matnr
werks
lgort
from mard
into table itab1
for all entries in itab
where matnr = itab-matnr
and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
werks = itab-werks.
endloop.
regards,
venkat. -
Creating dynamic internal table with deep structure
Hi all,
I need to create an internal table with deep structure dynamically. I've already created tables with method 'create_dynamic_table' but I'm struggling with the deep structure.
I would need an internal table with the following structure:
DATA: BEGIN OF lt_t1,
s1 TYPE REF TO data,
s2 TYPE REF TO data,
END OF lt_t1.
S1 and S2 have to be tables.
It might be possible with RTTS but all the examples in the forums (that I've found so far) are related to at least one DDIC-structure. And that's my problem because both tables are created during runtime.
Thank you in advance
NicolaHi Frédéric,
I hope my english is good enough to explain it correctly:
We use a function builder for SEM-BPS which copies data from one Cube to another. This Cube is transactional, so you can't easily read a structure out of DDIC.
The export parameter of this function builder is a table with type 'any table'.
Until today we used a fixed definition e.g.:
TYPES:
BEGIN OF xtyp_chas,
/sie/sr_ocomp TYPE /b52/oisr_ocomp,
/sie/ts_03psp TYPE /b52/oits_03psp,
0activity TYPE /bi0/oiactivity,
0acty_elemt TYPE /bi0/oiacty_elemt,
0costelmnt TYPE /bi0/oicostelmnt,
0co_area TYPE /bi0/oico_area,
0creditor TYPE /bi0/oicreditor,
0currency TYPE /bi0/oicurrency,
0curtype TYPE /bi0/oicurtype,
0db_cr_ind TYPE /bi0/oidb_cr_ind,
0fiscper TYPE /bi0/oifiscper,
0fiscper3 TYPE /bi0/oifiscper3,
0fiscyear TYPE /bi0/oifiscyear,
0metype TYPE /bi0/oimetype,
0network TYPE /bi0/oinetwork,
0part_actty TYPE /bi0/oipart_actty,
0part_cctr TYPE /bi0/oipart_cctr,
0piobjsv TYPE /bi0/oipiobjsv,
0project TYPE /bi0/oiproject,
0unit TYPE /bi0/oiunit,
0vtdetail TYPE /bi0/oivtdetail,
0vtstat TYPE /bi0/oivtstat,
0vtype TYPE /bi0/oivtype,
0bus_area TYPE /bi0/oibus_area,
0cashdetail TYPE /bi0/oicashdetail,
0cashtype TYPE /bi0/oicashtype,
0comp_code TYPE /bi0/oicomp_code,
0coorder TYPE /bi0/oicoorder,
0cs_dimen TYPE /bi0/oics_dimen,
0cs_unit TYPE /bi0/oics_unit,
0int_bus TYPE /bi0/oiint_bus,
0part_abcpr TYPE /bi0/oipart_abcpr,
0part_coord TYPE /bi0/oipart_coord,
0part_wbsel TYPE /bi0/oipart_wbsel,
0piovalue TYPE /bi0/oipiovalue,
0profit_ctr TYPE /bi0/oiprofit_ctr,
0ps_obj TYPE /bi0/oips_obj,
0statussys0 TYPE /bi0/oistatussys0,
zfbwheroj TYPE /bic/oizfbwheroj,
END OF xtyp_chas,
BEGIN OF xtyp_kyfs,
0amount TYPE /bi0/oiamount,
0quantity TYPE /bi0/oiquantity,
zf03oaws TYPE /bic/oizf03oaws,
zf03oqty TYPE /bic/oizf03oqty,
zf03ozsta TYPE /bic/oizf03ozsta,
END OF xtyp_kyfs,
BEGIN OF xtyp_zf03g003,
s_chas TYPE xtyp_chas,
s_kyfs TYPE xtyp_kyfs,
END OF xtyp_zf03g003,
xtyp_zf03g003_t TYPE HASHED TABLE OF xtyp_zf03g003
WITH UNIQUE KEY s_chas.
DATA: lt_ibm_data TYPE xtyp_zf03g003_t,
ls_ibm_data TYPE xtyp_zf03g003.
So one table (s_chas) contains the characteristics of the Cube and the other (s_kyfs) contains the keyfigures. That's exactly the format we need for the export parameter. At the end of the program, we use the following coding to fill the export table (eto_chas):
loop at lt_ibm_data into ls_ibm_data.
collect ls_ibm_data-s_chas into eto_chas.
endloop.
So in this moment I give this table the structure that is needed to move the data into the cube. I can't change the requirement because it is a standard interface.
I would like to change that coding to be dynamically. Because if somebody changes a charasteristic or a keyfigure in the cube, we would have to change the function builder too. I don't think that the SEM-BPS department will let us know every time they've changed something anyway.
So I hope that my explanation wasn't too confusing
Nicola -
How to create database and table with GUI?
How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanksgo to www.orasoft.org
here is a gui tool.
null -
Sorting internal table with line types
Hi,
I have internal table juts for an example with four entries as below:
A[]
Line.....Line Types
444001.....P
New York...C
Evershine..B
Mary.......N
I want to sort the internal table with line types in order of lin types NBCP.
How can i do this ?
Please help.
Note: Above example is just with four entries, there might be internal table with ten entries and ten defined sorting order for line types.Hi Tushar,
Please note that we can't changes the mandatory sequence of the address format as defined in the country specif address format. We can change the sequence of others fields by line_priority.
Try to change the address type :
ADDRESS_TYPE - Address type (from 3.0C)
There are three types of address:
Address type '1': addresses of firms or organizations; the address structure which is used in most SAP applications as 'Address'.
Address type '2': address of a person
Address type '3': work address, usually the address of a contact person in a company
Please use T/code "OY01"> Select Country> Example :AU"--> Display --> Select address key and press F1. You will find SAP 's Address format configuration .
sap help:
Formatting Routine Key for Printing Addresses
For printing addresses, there are country-specific routines which in each case copy the correct postal formatting of the address.
The three-character "Address Layout Key" for the recipient country controls which of the routines available for formatting addresses in the relevant country is used.
These routines are programmed into the ADDRESS_INTO_PRINTFORM function module.
They are based on different national and international guidelines and norms, including:
ISO 11180,
contracts of the World Postal Union (Seoul 1994),
international address samples from the World Postal Union
as well as the available rules of the individual countries.
Below you will find an overview of the country-specific formats currently implemented.
Customers can program their own formatting routines using a customer exit. The SZAD0001 SAP enhancement has been defined in the package SZAD for this (-> transaction CMOD).
General formatting rules
The following parameters are used depending on the transaction:
whether the company address (street/house number) or the P.O. Box address is printed if both exist,
how many lines are available for printing,
which is the sender country.
If there are not enough lines, then lines are left out according to a standard sequence.
The address format depends on whether the sender country is the same as, or different from, the recipient country. The country is always specified from abroad, either as a text name, or as an identification code of up to three characters (license plate code or country key).
Where the country name is written out in full, it is written in the language of the sender country. If a language is not specified for the sender country, or the sender country itself is not specified, the logon language is used instead.
Exception: the language for the country code can be explicitly overwritten by a parameter in the print program (e.g. when the country code for customs transit papers is always to be specified in a particular language, such as English). if the "Print country name in recipient language" flag is set in the print program, the recipient language is used.
Other language-dependent components such as the title and the word 'PO Box' are printed in the recipient language or the recipient country language. If this cannot be determined, the logon language is again used.
For all formats except Great Britain (006), Japan (013), and South Korea (017), the core of the address is formatted as follows (without empty lines, except for the compulsory empty line:)
title line (if applicable)
name block (differs depending on the address type, see below)
street address or PO Box
(compulsory empty line, if applicable)
city line with postal code
country code (if applicable)
The city line and the country name are always printed in upper case for foreign addresses (only for the complete address, not for short forms).
The name block generally consists of the following:
"Normal" addresses (address type SPACE and address type 1):
NAME1
NAME2
NAME3
NAME4
Personal addresses (address type 2):
Title of person and name of person
Business address with department and contact person (address type 3):
NAME1
NAME2
NAME3
NAME4
department
title of person and name of person
In addresses entered using Business Address Services (central address management) (see Release notes Central Address Management for Release 4.0 and Central Address Management for Release 4.5 ), the street address can comprise several lines (see Print street address), otherwise street and house number are maintained in the Street field.
Some countries do not have a compulsory empty line (see notes below). The city and district are printed in the city line, connected by a hyphen (exceptions: 004 USA, 006 Great Britain/Ireland, 013 Japan, 015 Germany, 017 South Korea, 019 Denmark), provided that the total length does not exceed 35 characters. If a different city is specified for the PO Box (PFORT), this is used in the PO Box address.
In all formats which use a country code (currently 001 European standard format 002 Italy, 011 Switzerland and 014 Austria ), the license plate code for that country is used. If this is not maintained, the country key in table T005 is used.
If the "Print country name in foreign addresses" flag is set for the sender country in table 005, the country code is not used; the country name is printed in the last line of the address.
Formats 004 (USA), 005 (Canada) and 008 (Singapore) contain a line ('F') for the function of the contact person in the company (if address type = '3'). This line comes immediately after the line 'N' (Name (and title) of the natural person).
In formats 002 (Italy), 004 (USA), 005 (Canada), 006 (Great Britain), 007 (Brazil) and Australia (009), the REGIO field (Region, State, Province, County) is formatted. For the USA, Canada, Brazil and Australia, the key from table T005S is used; for Great Britain the text name from table T005U.
In all countries for which no "Address structure key" is maintained, a standard format is used which corresponds to format "010".
Hope this may help you.
Lanka -
Import from database an internal table with generic Type : Web Dynpro ABAP
Hi everyone,
i have a requirement in which i'm asked to transfer data flow between two frameworks, from WD Component to another. The problem is that i have to transfer internal tables with generic types. i used the import/ export from database approache but in that way i get an error message saying "Object references and data references not yet supported".
Here is my code to extract a generic internal table from memory.
DATA l_table_f4 TYPE TABLE OF REF TO data.
FIELD-SYMBOLS: <l_table_f4> TYPE STANDARD TABLE.
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
DATA: ls_indx TYPE indx.
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->fire_vh_search_action_evt( ).
ASSIGN l_table_f4 TO <l_table_f4>.
*-- Import table for Help F4
IMPORT l_table_f4 TO <l_table_f4> FROM DATABASE indx(v1) TO ls_indx ID 'table_help_f4_ID'.
The error message is desplayed when last instruction is executed " IMPORT l_table_f4...".
I saw another post facing the same problem but never solved "Generic Type for import Database".
Please can anyone help ?
Thanks & Kind regards.hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
field1 TYPE ztab-field1,
field2 TYPE ztab-field2,
*your own fields here:
field TYPE i,
field(30) TYPE c,
END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec -
How to return an internal table with methods ?
Hi,
I am an Java programmer and very new to ABAP.
How do I return a internal table with a method? I have the table GP1_PRODUCTS and want to return a copy of this table as an internal table called PRODUCTS.
Here is my code that does not work:
class PRODUCTS definition
public
final
create public .
public section.
*"* public components of class PRODUCTS
*"* do not include other source files here!!!
methods GET_PRODUCT_LIST
returning
value(PRODUCTS) type GP1_PRODUCTS .
protected section.
*"* protected components of class PRODUCTS
*"* do not include other source files here!!!
private section.
*"* private components of class PRODUCTS
*"* do not include other source files here!!!
ENDCLASS.
CLASS PRODUCTS IMPLEMENTATION.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method PRODUCTS->GET_PRODUCT_LIST
* +-------------------------------------------------------------------------------------------------+
* | [<-()] PRODUCTS TYPE GP1_PRODUCTS
* +--------------------------------------------------------------------------------------</SIGNATURE>
method GET_PRODUCT_LIST.
DATA: it_products TYPE STANDARD TABLE OF GP1_PRODUCTS.
select * from GP1_PRODUCTS into table it_products.
PRODUCTS = it_products.
endmethod.
ENDCLASS.You have to create a table type for your table GP1_PRODUCTS.
If you use global class (created in SE24), than:
Create a Table Type in SE11
Go to SE11, Enter a name like ZPRODUCTS in the Data Type
There will be popup when you press the Create button to decide a type. Select the Table Type
Enter GP1_PRODUCTS in the Line Type.
* method declaration
methods GET_PRODUCT_LIST
returning
value(PRODUCTS) type ZPRODUCTS.
If you use local class:
TYPES: ty_products type standard table of GP1_PRODUCTS..
* method declaration
methods GET_PRODUCT_LIST
returning
value(PRODUCTS) type ty_products
Regards,
Naimesh Patel -
Create dynamic internal table with dynamic structure
I have an internal table itab1 that have 12 amount fields from period1 thru period12. I need to create a dynamic table with dynamic structure for the period column if the total amount of each column is > 0. Any idea on how to do that?
For example if my itab1 has 20 rows and the sum of period1 = 35, sum of period2 = 0, sum of period3 = 5, sum of period4 =0, sum of period5 = 2 then I need to create a dynamic structure for the field column that have the total > 0, i.e structure struct1 have field period1, period3 and period5 only. Then I will need to load the data to itab2 from itab1. Can someone help.
Thanks. I am on 4.7 and will upgrade to ERP 6.0 soon.go throgh this....
REPORT yusmm_text1 NO STANDARD PAGE HEADING
LINE-SIZE 199.
T A B L E S
TABLES: MARA,
MAKT,
THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
SPRAS TYPE MAKT-SPRAS,
LTXT(2000) TYPE C ,
SRNO TYPE N ,
END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
SPRAS TYPE T002-SPRAS,
LAISO TYPE T002-LAISO,
SRNO TYPE N ,
END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
gv_lit TYPE I,
gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
gv_li1(3) TYPE N,
g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
T_NEWLINE TYPE REF TO DATA,
T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
T_FLDCAT TYPE LVC_T_FCAT,
WA_IT_FLDCAT TYPE LVC_S_FCAT,
WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
WA_COLNO(2) TYPE N,
WA_FLNAME(5) TYPE C,
L_LT TYPE SLIS_LAYOUT_ALV.
GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
"tablename
<FS_DYNTABLE>, "Field symbol to create work area
<FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA,
LI_FIELD_CAT TYPE LVC_T_FCAT,
LWA_FIELD_CAT TYPE LVC_S_FCAT.
PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
OBLIGATORY ,
S_MATNR FOR MARA-MATNR,
S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Material Number'.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Authorization Group'.
g_VAR11 = wg_final-srno + 2.
gv_li1 = gv_li1 + 2.
MOVE : g_var11 TO gv_i1.
ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'MatDesc'.
g_var2 = g_var11 + gv_lines.
ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'BasicData'.
APPEND <LWA_LINE_WA1> TO <FS_22>.
EXIT.
ENDLOOP.
LOOP AT ig_final INTO wg_final.
AT NEW matnr.
gv_index = sy-tabix.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-matnr.
ENDAT.
AT NEW MATNR.
GV_INDEX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-matnr.
ENDAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-begru.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-begru.
gv_var = wg_final-srno + 2.
gv_li = gv_li + 2.
MOVE : gv_var TO gv_i.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-maktx.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-maktx.
gv_var1 = gv_var + gv_lines .
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-ltxt.
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-ltxt.
AT END OF matnr.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
AT END OF matnr.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
from mara up to gp_size rows
appending corresponding fields of table ig_matnr
where matnr in s_matnr
and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
MARA~BEGRU
MARA~MTART
MAKT~SPRAS
MAKT~MAKTX FROM MARA INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
WHERE makt~spras IN s_spras
AND mara~matnr IN s_matnr
AND mara~mtart IN s_mtart
AND mara~matnr EQ ig_matnr-matnr.
endloop.
IF sy-subrc = 0.
SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
wg_final-MATNR = wg_mara_makt-MATNR.
wg_final-BEGRU = wg_mara_makt-BEGRU.
wg_final-MTART = wg_mara_makt-MTART.
wg_final-SPRAS = wg_mara_makt-SPRAS.
wg_final-MAKTX = wg_mara_makt-MAKTX.
READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
IF sy-subrc = 0.
wg_final-srno = wg_t002-srno.
ENDIF.
CLEAR ig_thead[].
ig_thead-TDOBJECT = 'MATERIAL'.
ig_thead-TDNAME = wg_final-matnr.
ig_thead-TDID = 'GRUN'.
ig_thead-TDSPRAS = wg_final-spras.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = IG_THEAD
I_READONLY = 'X'
IMPORTING
E_HEADER = IG_THEAD
TABLES
T_LINES = IG_TLINE[]
EXCEPTIONS
NOTFOUND = 1.
IF sy-subrc EQ 0.
LOOP AT ig_tline.
gv_strg = ig_tline-tdline.
IF gv_strg1 <> ' '.
CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
ELSE.
gv_strg1 = gv_strg.
ENDIF.
ENDLOOP.
wg_final-ltxt = gv_strg1.
APPEND wg_final TO ig_final.
CLEAR wg_final.
gv_strg1 = ' '.
ELSE.
APPEND wg_final TO ig_final.
ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
g_v = g_v + 1.
Wg_t002-srno = g_v.
MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'MD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'BD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Material-Text.xls'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
IMPORTING
FILELENGTH = GL_LENGHT
TABLES
DATA_TAB = <FS_22>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF GL_LENGHT NE 0.
MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
ENDIF.
ENDCASE.
ENDFORM. "user_command
Thanks -
Create dynamic internal table with deep structure;cell coloring dynamic ALV
Hi,
My requirement is to do cell colouring for a dynamic ALV.
So I am creating a dynamic internal table using the following method.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fieldcatalog[]
IMPORTING
ep_table = i_output.
But how do I define field COLORS which should be again an internal table ?
Is there any other way for cell colouring?
Putting my problem in another way:
How do I create a dynamic internal table with one field as another internal table.
Quick replies are highly appreciated.
Thanks,
Nisha Vengal.halo Nisha
Before building the display table . you can add the field in the feild catalog right . This display table gets generated from the field catalog right
1 Create a global structute say ZEXTEND_FIELDCAT
2 Have fields like STYLE type lvc_t_styl
COLOR type LVC_T_SCOL.
3 Now you have to extend ur fieldcatalog
l_fieldcat-fieldname = COLOR'.
l_fieldcat-ref_field = 'COLOR'.
l_fieldcat-ref_table = 'ZEXTEND_FIELDCAT'.
APPEND l_fieldcat TO lt_field_catalog.
CLEAR l_fieldcat.
Maybe you are looking for
-
I am trying to FIX on a UDA for the 'Period' dimension. The UDA is defined as either 'open' or 'closed'. The dimension is re-built dynamically each night. When some periods are 'open' and others 'closed', this MAXL works. However, when all periods ar
-
Unable to drag more than one bookmark at a time
i have three backed up firefox bookmarks that i wanted to merge into one. i made a new folder and attempted to drag each restored bookmark into the same folder so i can have all the favorites in one file instead of three. firefox 4.01 wont let me do
-
I searched and found some information... but the information wasn't specifically clear, so better to find out for sure, and help archive some clear information for the community... I'm looking at attaching 2 external LCD monitors to my T500 (2082-3HU
-
Record not shown in table control
Hi experts, I am working on the module pool program with a screen 0100. There is a table control called TABL_MATR in screen 0100. There is no error while compiling the program. But no record shown when a record added into the table control. I do not
-
My usb ports dont remember whats in them!!
Hi, just got my computer back up and running and now the usb ports are forgetting what I have in them every time I restart or fresh boot my pc. When in windows I have to take the usb connector out then reattach it and it detects it and runs. I'm us