How to create an objectkey for documents

Hi gurus,
I try to create an object key for documents (to read the classification). I tried using FM  BAPI_OBJCL_GET_KEY_OF_OBJECT but there is only one field for Objectname.
I tried different ways to execute the FM but the reurnparameter always tells me "Class type 017 requires additional objects". Can someone tell me how to use this FM for
documents or is there any other way to create such a Objectkey (via RFC)?

Hi,
As far as I understand you dont create Object key for documents. These are created by system depending on you doc no, doc part, doc type, doc ver.
You can find object key in table DRAD.
Hope it helps.
Regards,
Siddhesh S.Tawate

Similar Messages

  • How to create custom workflow for document library?

    Hi All,
    I have a document library with a custom  people picker column "assign to". Need to create approval workflow using designer, approval must send to person who is selected in "assign to" column. I tried with designer workflow,But finally
    facing "The e-mail message cannot be sent. Make sure the e-mail has a valid recipient". How to fix and achieve my scenario? Thanks in advance!

    I would suggest you to firstly print the assign to value using "Log to history" action. Moslty it could be of three reasons,
    1. Assign to value is not getting populated correctly in your SPD workflow
    2. Email server is not configured properly, If alerts and other emails are workfing in your server then this would not be a reason for issue
    3. The user your trying to send an email does not have valid email
    do let us know if can get the user email in your workflow.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if the reply helps you

  • How to create a Index for KM documents

    Hi Experts.......
    I have two queries .
    1,How to create a Index for the KM Server documents so that when ever i am in need of particular document,i can be able to retrive the exact document within short time......
    2,What Is TREX? Need of TREX ?
    If any one have documents for the above said queries kindly send it to [email protected]
    Thanks in Advance,
    Jasmine

    Hi Jasmine,
    1.In the EP 6.0 you can create index System Administration -> System Configuration -> Knowledge Management -> Index Administration
    2.TREX is search engine that will proccess the documents that you have specified in the index Data sources when you have created the index.
    The status of TREX you can see in System Administration -> Monitoring -> Knowledge Management -> TREX Monitor or Index Monitor for indexing monitoring.
    If you don't have connected any TREX engine to J2EE, just start the visual administrator and configure the TREX service.
    To install the TREX you can follow the instguides for TREX service.sap.com/instguides SAP Netweaver->Release 04 or 2004s -> Installation -> Cross-NW
    I hope that it helps.
    Bye
    Dan

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

  • How to create a scenarios for duplicate entries

    Hi friends,
    Please help me how to create a scenarios for duplicate entries, we are using stock transfer orders from there we need to create scenarios for duplicate entries, please guide me on the same.

    Hi,
    F-01 can be used to create a sample document.
    Regards
    Aditya

  • How to create a documentation for Badi?

    Hi All,
    how to create a documentation for Badi?
    This step is requested in the OSS note, but not explained how to perform it...
    Thanks and regards,
    Alex.

    Hi All,
    solved. created in SE18
    I noticed, that it is also possible to create such documentation in SE61 *** well,
    Document Class  Implementation Guide chapter (SIMG)
    Chapter   SIMG
    Also the translation of documentation could be done in such way:
    SE63--->Translation--->ABAP OBjects--->Transport object:
    R3TR DSYS SIMGbadi_name_goes_here
    Regards,
    Alex

  • How to create a object for IPageItemControlData?

    how to create a object for IPageItemControlData?

    From the header comment you'll see that IPageItemControlData is an Interface of PageItemWidget. That must've been an InDesign 1.0 or 1.5 feature predating kPageItemBoss, because except for the same comment even in InDesign 2.0 SDK the only further reference is a copy in the comment of its sibbling IFrameControlData which was removed with InDesign CS.
    The IID and kPageItemControlDataImpl are probably only around because deep under the hood there must be some kind of conversion provider waiting to do its job on a very old document.
    I guess the closest in today's functionality will be IHierarchy.
    Dirk

  • How to create Activex object for my Visual C++ object

    Hi,
    I am working on development on Acrobat 9.0 SDK. I am facing problem is that I can compiled Visual C++ source code to an api. I can test functions on this api on Acrobat 9.0 windows, but I could not test it on IE web browser, because I don't know how to create Activex object from my Visual C++ source code or its api.
    I read Acrobat 9 SDK document and found under C:\Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard has two files: Acro9PIWizInstaller.msi and setup.exe. I am not very sure those file are the key to help me to create Activex objects for my api.  Are they the one I need to create Activex object? If not, could you please advise me how to create Activex object for my api or C++ codes.
    Thanks a lot for any of your comments or advices.
    Thai

    Hi lrosenth,
    Thanks a lot for your information.
    My question is, on Javascript how do I call a function from .api. Below is my very simple test.
    I got a function on BasicPlugin.cpp under C:\Acrobat 9 SDK\Version 1\PluginSupport\Samples\BasicPlugin. See below.
    I added BasicPlugin.api on C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins
         ACCB1 int ACCB2 MyPluginCommand() {
              int num = 5;
              return num;
    On my HTML file, I create an <Object> below:
        <OBJECT id="acrobatapp"
                classid="clsid:85DE1C45-2C66-101B-B02E-04021C009402">
        </OBJECT>
        <OBJECT id="acrobatpdf"
                classid="clsid:CA8A9780-280D-11CF-A24D-444553540000"   >
            <Param name="SRC" value="http://www.adobe.com/devnet/acrobat/pdfs/acrobat_digital_signature_appearances_v9.pdf">
       </OBJECT>
    On my Javascript. I call function MyPluginCommand() as below, but it is not working. How do I call function MyPluginCommand() on Javascript?
         var acrobatapp= document.getElementById("acrobatapp");
         var num= acrobatapp.MyPluginCommand();
         alert(num);
    Thanks for your support,
    Thai

  • How to create database item for fast formula?

    Hi,
    Is there any document for how to create database item for fast formula? I could not find in Metalink or this forum. Thanks.
    Andy

    Oracle ship many pre-delivered Database Items plus they're created automatically when you create Input Values (etc).
    There's often something already there for you. If there's not, you usually create Fast Formula functions to retrieve other data. You don't create your own custom DBIs; Oracle don't deliver APIs for that.

  • How to create new version for material

    Hi expert,
    Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
    Thanks

    HI,
    Do you mean to have version management for purchasing documents?.
    Best Regards,
    Arminda Jack

  • How to create Process chain for Aggregate for Master data

    Hello friends,
    I created Aggregates on Navigational Attributes.
    Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
    The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
    So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
    How to create process chains for the same ?????????
    Because if master data changes, then rolling up the aggregates straight forward will not help.
    So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
    If i mis interpreted something please rectify it.......
    Please advise

    Hello,
    the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically.  There is no need to deactivate them after master data loads.
    Best regards,
    Ralf

  • How to create an Invoice for the sales order using the T-Code VF01

    Hello Experts,
    How to create an Invoice for a sales order using the T-Code VF01?
    Thanks in advace,
    Suma

    hi,
    Make the following settings-
    1. Create sales document and billing type
    2. assign billing type in sales document type config VOV8
    3. Activate itemcategory as sales order related billing
    4. Maintain copy control header and item level between sales order and billing
    5. Maintain pricing procedure for sales order and billing
    6. Define Output procedure in case to print invoice
    Regards
    Goutham

  • How to create an extension for generated type idoc

    Hi all,
    Can u please look into this
    How to create an extension for generated type idoc ?  for example Idoc type BATMAS02

    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    - Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    - Click on Create new and enter a description and press enter.
    - Click on ZIDOCTYPE01 and then on the Create icon.
    - Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    - Enter a description for your segment type and create.
    - Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    - Save and generate, press back
    - To release the segment choose Goto, Release from the menu.
    - Check the box on the line of your segment.
    - Save, back and enter.
    - Your Idoc type structure should be displayed with your new segment.
    - Save and back.
    - To release the Idoc type choose Extras, Release type from the menu and Yes.
    ALE FUNCTION MODULE ENHANCEMENTS
    Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
    The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
    • For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
    • From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
    • Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
    Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
    All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
    When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
    • Execute transaction CMOD.
    • Enter name of project, say CSTMAST1.
    • Click on Create.
    • Enter a description of the project.
    • Save.
    • Click on SAP Enhancements.
    • Enter VSV00001 for Enhancement.
    • Save.
    Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
    As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
    The two important factors to consider while developing the customer function are:
    1. The point in the ALE function module where the function exit occurs
    2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
    Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
    Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
    Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
    Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
    • From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
    • Find Customer Function 001.
    • Double-click on 001.
    • The function EXIT_SAPLVV01_001 will be displayed.
    • Double-click on INCLUDE ZXVSVU01.
    • You will be asked to create a new include object. Proceed as desired.
    • Enter code (as in Listing 1).
    • Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
    Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
    To maintain the contact personâs business address of a customer:
    • Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
    • Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
    With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
    Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
    The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
    Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
    regards,
    srinivas

  • How to create a macro for a planning type in MC8b transaction

    Hi,
    I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
    the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
    i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
    but i need to create a macro for this planning type .
    can any body give the details information how to create a Macro for a planning type.
    Thanks and regards
    GopalKrishna

    Dear Gopal
    May be the link would be helpful to you.
    [Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
    Drill down the left tab once you opened the link, for more information.
    Thanks
    G. Lakshmipathi

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

Maybe you are looking for