How to create an OS X boot drive?

Hi there!
So I'm buying a new 13" MacBook Pro 2.5 GHz in December. A year from now, I plan on installing an Intel 520 120GB SSD, so I don't void the warranty early! I have a Time Capsule, so after I install it, I can just "Restore from Time Machine backup". But I will need to create a boot drive.
Can someone tell me how to create the external boot drive (preferably without using third-party software) and boot from it. And I would then like to know how to get the information back onto the SSD. Any response from someone who has tried this before is appreciated.
(Note: I can't use the Mountain Lion installer from the Mac App Store, because the MacBook Pro comes shipped with Mountain Lion.
Thanks again,
Solid-State Me

A year from now, I plan on installing an Intel 520 120GB SSD, so I don't void the warranty early!
Upgrading your Hard Drive is an authorized procedure and would not void your warranty. On another note, I would highly recommend a larger SSD, especially if you're waiting a year since prices are constantly dropping.

Similar Messages

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

How to creating TreeModel of the underlaying drives

can anybody plz tell me how to creating TreeModel of the underlaying drives. so that we get the entire tree structure of the drives like window explorer.

This thread will get you started.
http://forum.java.sun.com/thread.jsp?forum=57&thread=457526

How to make an SSD a boot drive

I have a 2010 27" iMac (Model 11,3) I plan to upgrade my internal HDD to a 2TB model, and I would like to add a 120GB SSD. Currently I have ML on my internal drive. I have a CCC clone which I could use to colone the new HDD. If I install the SSD how would I make it the boot drive? I would not need ML on the 2TB drive, just on the SSD. I am under the impression that ML can not be installed on a bare drive, it needs either Lion or SL as a base.
Does anyone have a suggestion how I could set up the SSD?

Some users remove the optical drive and replace it with an SSD drive. Search "replace optical drive with ssd imac" for more links.
http://guides.crucial.com/Guide/iMac+Intel+27-Inch+EMC+2390+SSD+Dual+Drive+Insta llation/632

How to create a system recovery USB drive?

My U845-S406 crashes every 15 minutes with a BSOD referencing iastor.sys.
Multiple diagnostics say it is all good.
Multiple virus softwares say it is clean.
It crashes even quicker in safe mode.
I have the latest Toshiba raid drivers, but updated to a more recent Intel set. The error changes to iastora.sys, and goes back to iastor.sys when I switch back to the Toshiba drivers.
I booted holding down 0, and told it to restore; but it promptly crashes.
I made a W7 disk and tried to load it, but it promptly crashes.
As a last resort before throwing the computer out, I want to create a system recovery USB drive, format the harddrive and try recovering from the USB; but I don't have the Toshiba Recovery Media Creator (or any Toshiba software at all...) I downloaded a copy and ran it, but it says I don't have a HDD Recovery Area.
I know I have one because 1) I can access it by hold down 0, and 2)Partition Wizard showes it.
So, how can I create a system recover USB drive (or make Recovery Media Creator find the HDD recovery Area...)
Interestingly, the other day it spent 90 minutes installing a W7 update without a problem, but crashed immediately when done. Maybe that means something.

Satellite U845-S406
Downloads here.
Please zip up a few of the corresponding *.dmp files from the C:\Windows\Minidump folder and attach them to your reply.
So the procedure in the section Creating recovery media (p. 53 in the User's Guide) doesn't work? Exactly where does it go wrong?
Satellite/Satellite Pro U800W Series User’s Guide
-Jerry

How to create up-to-date Recovery Drive and Recovery Partition on Windows 8.1 U1.

I am running 8.1 and exploring the recovery options.
I'm periodically creating recovery images, etc. but would like to do better than that.
I'd like to know how to:
Create an updated Recovery Partition that will restore to a Recovery Image (WIM) that I choose.
Modify / Create a Recovery Drive that includes a system image
of my choice, as opposed to an image created by the manufacturer / supplier (and the extra work that that implies). If I can create an up to date partition and mark it as such, then I'm clearly done. Should I not be able to sensibly
make my own partition, how do I create this on a USB recovery drive? (The built in interface has a Boolean option, use hard drive recovery partition OR use nothing. This would be solved if it
also had an option to use current recovery image. I'm happy to write simple code to make this happen if that's what it takes.)
Put another way. I can make a recovery image at will, how do I create a recovery partition and recovery drive to match?
I'm no expert on the ins and outs of Windows 8.1 recovery, if this is already covered elsewhere, I'd appreciate a link.

I have documented an unsupported process for creating an automated recovery for use in a task sequence
here. However, if I read your post correctly you are suggesting being able to do this from USB media. The method for creating the recovery partition is simple. It is simply a partition containing a folder called RecoveryImage with your install.wim
inside. Reagentc is the tool that will actually tell Windows where that recovery is. While I don't personally have a use for what your suggesting, I may give it a shot just to see if it can be done. I suspect it will work.
Here are the links that got me started:
ReagentC:
http://technet.microsoft.com/en-us/library/dd799242(v=WS.10).aspx
Creating Push Button Reset:
http://technet.microsoft.com/en-us/library/hh824917.aspx
Good Luck!
bill
Regards, Bill Moore @BMooreAtDell

How to install SSD as a boot drive for Snow leopard? I am confused...

Hello; This is first time I will use SSD on my macpro. I ordered the SSD from amazon and it will come next week I hope. I need some help and advice. My boot drive is HDD (Macintosh HD) now. So, I Want to move from the HDD to SSD. What's the easiest and guarentee way to do it? I am not a good technician. I've read about carbon copy cleaner or disk utility to back-up everything to another drive, boot from there then select the SSD. Is this needed? Cant I just directly copy my application and operation System to SSD? How about using the installation disc and directly install to the SSD? I am confused. What do you suggest? Please help
My system:
Macpro early 2008 (3.1)
OS 10.6.8
SSD is samsung 840 series 256 GB... (Since My macpro dont use SATA 3, I didnt see any reason to invest more money and buy 840 pro series or 830 series)

Hi, There are any number of different ways to move the data from one drive to another. My preference (the last one) would be to do a clean fresh install using system disks because of the way SSD drive's lay down data.
I'm not going to go into detail laying out HOW you do this. I assume you can do a Google (or other) engine search for details.
1) SystemMigration - this is a built in MAC OS X utility that allows you to move system + data from one drive to another
2) Do a Time Machine backup of everything and then use TM to restore everything the way it is or REINSTALL a clean install of the data+new system on the replacement drive.
3) Carbon copy Cloner is a great cloning application and can "block clone" from a smaller drive to a replacement drive of the same or larger size
The above 3 methods assume you will transfer ALL the date, good bad & ugly, from the magnetic media to the SSD. This is the most efficient method, but from personal experience you may end up not getting
the faster boot up time and disk responsiveness you would expect from an SSD. I can't say why; it may have to do with the way data is initially "laid down" on the SSD OR all the extra "jetsam and flotsam" that accompanies a used system drive - "(how's THAT for non techno-geek detail).
I have noticed that Drive clones are only as good as the source from which they are taken and that when I cloned a magnetic Lion 10.6 Drive to an SSD, there was no significant advantage in boot times with a 10.6 Lion boot taking anywhere from 45 to 60 to 75 seconds (pretty much he same for magnetic drives).
I then did an original clean system install on the SSD as if I were doing it for the first time....updated it completely and THEN and only then did I reinstall all the apps individually followed by cloining the data files.
By doing this, I was able to cut the boot time on that SSD (and all subsequent ssd clones of the original SDD) to 25 to 30 seconds.
NOT BAD. Just simply cloning what you already have is a simple option, but if you're looking for optimal SSD performance, I'd opt for a fresh clean instll of everything.

How to create an handle for Miniport driver Ioctl interface?

Hi All,
I am trying to create an handle for my miniport driver Ioctl interface, but it showing the following error while opening the handle with CreateFile API.
"you are requesting IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMTYPE,
which has been deprecated. Use IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMNAME
instead"
Can anyone suggest on how to create the handle for Miniport Ioctl interface?
Thank you,
Sagar

Hi,
I have seen this error only in GUI based apps. Maybe you are pointing to the wrong error.
Check if CreateFile returns INVALID_HANDLE_VALUE. API return value should give you more information.
Regards,
Balaji.

How to create a USB recovery flash drive using recovery ISO image?

This “HowTo” provides information and instruction how to create a USB recovery media flash drive using the Toshiba recovery ISO image files or Toshiba Recovery discs (DVDs)
To create a USB recovery media flash drive, a USB flash drive with at least 16GB disk space is suggested (depends on the size of the ISO images or recovery discs).
Note: Since 2015 the ISO layout has changed and a different procedure must be processed to create the USB media. The new recovery media type can be identified by the names of the ISO files.
More info: http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Yes, that article should apply to tablets.
But if your USB recovery drive does not get recognized then it must be corrupted - you should be able to format your disk and perhaps try to see if creating a Recovery device on other devices will make it recognizable on your tablet 2.

How to create a partition using Boot camp assistant 4.0.1 ?

Hi, i would like to "Partition" my drive and not "Install" windows 7 like the assistant asks me... I wanted to increase the size of my bootcamp partition. So i used winclone to save it and now to restore it i need a NTFS partition that is normally created with the bootcamp assistant. But with the latest (4.0.1) i have no choice to partition and report the installation for later. As it was before.... So can someone tell me how i can create that partition on my drive? Because when i choose the size and then click install, the assistant requires a disk that i don't have. Thx for your help.

So i called apple today and the outcome is that i cannot partition my disk with BCA 4.0.1. Not anymore. The only way to do it is to go back to Snow leopard, with BCA 3.0 to partition your disk. and then upgrade to lion once you made your partition with BCA 3.0. And another thing: you can only install Windows 7 not Vista or XP. with BCA 4.0.1 its the only one allowed. So for everyone out there trying to increase the size of your Bootcamp partition using Winclone, it's not possible with Lion anymore. I ended up bying a windows 7 copy at retail price.... and start over again..

How do i clone this external boot drive to my MBP?

I have been testing Mavericks for some time, booting from an external drive. The internal drive on my MBP is still running 10.6.8.
Now I want to clone the external to the internal, replacing the Snow Leopard setup with Mavericks.
In the Finder, my internal drive appears in the sidebar under ‘Devices’ - as does the external boot drive. But clicking on the internal drive icon (bringing up the file hierarchy) shows the external boot drive in the adjacent column - ie as part of the internal drive.
As a result, when I launch Superduper to clone from the external to the internal, the internal does not appear as an option.
Can you see what’s wrong here, and advise on how can I achieve what I want to do?

I tried 3 re-starts - the first 2 made no difference to the situation, but the third at last brought up the option to clone to the internal drive. The clone is now completed, and all appears to be working OK.

How To Make Mac Partition Main Boot Drive

Hi. Whenever I boot my computer, it always boots into XP when you don't press option. What can I do so that the Mac partition is the main boot drive? Thanks.

Hi,
while in OSX open System Preference from the Apple Top Menu, then open Startup Volume and set your OSX volume as the default startup volume.
Do the needed restart and voila
regards
Stefan

How to create and use a boot volume clone?

Hello. My name is Cassiano and I'm NOT a system administrator. I'm an architect. I design and build houses, not systems. And the reason I'm telling you that is because I need your help.
The short version of my problem is this: "How do I create a boot volume clone", but I think I need to tell you the whole story.
Here at the office I work we have 18 iMacs and 1 Xserve running OS X Server 10.4.9.
Although I'm an architect I'm responsible to keep the computers up and running.
This is not because I want, but just because I'm the one here that knows a bit more about this stuff and although I'm not an expert, I know quite a lot about this stuff. I did pretty much everything here. Configured the network, firewall, installed the Xserve, etc, but of course that if something breaks we just take the computer to apple store and wait for it to be fixed
The Xserve has 3 HDs inside. 1 at bay1 which is the boot and 2 others on bay2 and bay3. The HDs on bay2 and bay3 are working as one using SoftRAID and we use this volume to store all of our data. That is the reason we chose to mirror them using softRaid. If one fails, the other has everything and we just have to get a new one.
Last week we decided to setup the Xserve to be our mail server as well, so I turned on the Mail Service and after a lot of reading I managed to configure it correctly. In fact we have our MX records pointing to a company that relays the email to our Xserve, so it is not really accessible from the outside world.
But this Mail thing made me loose my sleep. The reason is: before that our Xserve was used only as a file repository. So if it would break or something all we have to do is take the HD out of it, send it to apple store and plug the HD on another computer. All of our files would be safe and everybody would be happy. Of course this is an over simplificated situation, but that is pretty much how it would go.
But now everything is different. Every person here has the email account configured to the Xserve, which means that if it breaks or something goes wrong, no one will be able to send or receive emails. The new messages will not be lost, because the company that relays the emails to us will keep them there, but things will get chaotic here.
When reading this document here: http://developer.apple.com/documentation/MacOSXServer/Conceptual/XServerProgrammingGuide/Articles/abpinstall.html I saw this section that said: "Cloning the Boot Volume"
Where it says: The use of the boot volume clones is entirely to ensure the highest availability possible for your system volume, not your client data.
So, finally, my question is. How do I implement this "boot volume clone"? If I buy a new HD and place it on bay4 will I be able to do that? How?
After doing it if something goes wrong how do I use the "clone volume"?
Thank you for your patience and any help is greatly appreciated.
Best regards,
Cassiano Forestier
Specs of the Xserve
Machine Name: Xserve
Machine Model: Xserve1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 1.33 GHz
Boot ROM Version: XS11.0080.B00
SMC Version: 1.11f5
LOM Revision: 1.2.1

Yes, your server is becoming central to your business universe. Mine, too.
Boot from DVD, and use Disk Utility to create the clone. Another way of looking at this is as a photocopy or snapshot or block-by-block copy of the state of the disk at the moment the clone is made. You can then either boot from the clone (if needed; assuming the clone is on a bootable device), or boot from the DVD and copy the clone back to the original (or replacement) disk; this restores the disk state to that of the time the clone was made.
Yes, you'll need a disk to clone to. Probably more than one, since you'll probably want to set up a rotating pool, should you need to go back to an older snapshot.
You're undoubtedly also approaching a requirement for either an add-on storage array or storage shelf via one of your PCI-X or PCIe I/O expansion slots, or adding a FC SAN into an open PCI-X or PCIe slot and adding the external FC SAN Xserve RAID configuration that Apple sells.
The external storage can be "just a bunch of disks (JBOD)" in an external disk shelf, or an external RAID via add-in eSATA or add-in SCSI controller, or via Fibre Channel for the Xserve RAID configuration for the FC SAN configuration, or (for lower speeds) FireWire or (lowest) USB.
If your data is worth it and you want to deal centrally with Apple and your budget allows it (qv: "if your data is worth it"), Xserve RAID is the way to go. The external storage shelf is certainly a feasible approach -- but you'll likely end up dealing with a third-party for the configuration, set-up and third-party storage gear.
If you're looking for things that can go wrong here, recognize that RAID only protects against drive failure. RAID does not protect against accidental nor malicious file deletions, fat-fingered operator commands, nor against application or system-level disk corruptions. RAID (only) seeks to protect against disk errors. This gets into tapes, or near-line disk copies, or other such media. External tape, or other such archival media, and particularly media that can be sent off-site on a regular basis.
It's good that you're thinking about this stuff, too.

No Recovery Partition on my 10.7.4 MacPro, how to make a USB Rec boot drive?

Hey, all.
I'm on a 2008 model Mac Pro 8-core system for work. For whatever reason it doesn't have a recovery partition. I read that if I don't have a recovery partition, I can't make a recovery USB bootable drive....so how do I make one? And no, I cannot reinstall the OS on here, that would be beyond detrimental to what's going on here. (too many details to get into)
Alternatively, can I make one with my 10.8.5 MacbookPro at home and run it here on my Lion system? Or is that no bueno? What say you, Forum?

http://macs.about.com/od/macoperatingsystems/ss/Create-A-Bootable-Flash-Drive-Wi th-Os-X-Lion-Installer.htm

How to create new folders on iCloud Drive from iOS or with document picker?

Recently I wanted to share several files from my iWorks suite with my colleagues. I do not want them to edit these files, instead I made templates in Numbers for easier management of hours worked. Everyone could download their copy and keep a track of their hours themselves. The problem is, not everyone has an Apple product.
Unfortunately, iOS does not support native browsing of iCloud Drive (except the document picker, which, to me, isn't helpful at all), the only way I know of - to create a new folder - is to open iCloud.com in Safari, request the desktop site and make a new folder from there.
Is there another way of creating new folders, preferably an official app from Apple or from within an iWorks app or the document picker that I do not know of? Or is this actually a missing feature?
Also, if Apple could make an app similar to Microsoft OneDrive, that would be great.

Yes, there is a way. Here is the workaround. You can add notes folders directly with your iPad or iPhone.
http://keeplifesimple.weebly.com/1/post/2013/11/add-folders-to-native-notes-app- on-ios.html
Enjoy! Please pass it on, leave a comment on the page, or "like us" on Facebook if you find this information helpful.

How to create an OS X boot drive?

Similar Messages

Maybe you are looking for