How to create an Virtual resource Adapter in SUN IDM 7.1?

Hi,
Can anyone know how to create an Virtual resource Adapter in SUN IDM 7.1?
Regards
Damodar

Hi Dinesh,
Try using waveset.adminRoles
Thanks

Similar Messages

Network Gurus: How to create a "virtual" network adapter?

We have an older Xserve (G4) with dual ethernet ports, running OS X Server 10.4 and FileMaker Server 5.5. One of the ethernet ports is connected to an internal network (behind the firewall), the other to an external network (in front of the firewall). There are appropriate IP addresses on each port. Thing is, I need FileMaker Server to be able to serve databases on BOTH network ports and it doesn’t seem to be capable. There’s a “preferred IP address” setting which lets me select the internal or external addresses, but not both.
Is there a way to create a "virtual" network adapter that I can point FileMaker Server to, but have all traffic from both ethernet ports go through this "virtual" adapter? Sort of like a 'software router'?

IMHO, a far, far better solution would be to turn on the VPN server built-into your Mac OS X Server.
That way remote users can connect to the VPN (automatically, even) and get assigned an IP address in the internal network. You gain a high degree of security knowing that only known, trusted external users can access your database. If you do configure Filemaker to listed on your public interface you have no practical way of preventing rogue users from accessing your data.
Since your server already has the VPN server installed, and any modern (or even semi-modern) client should be able to connect to it, I wouldn't look any further.

Cannot create new virtual network adapter on logical switch team

I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
network virtualization.
Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
that it's always enabled on 2012 R2 anyway.
I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
doing something wrong?
Any information would be helpful. Thank you in advance for your time!

Hi Sir,
Glad to hear that the problem has been solved , thanks for your sharing .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to create local virtual web host ex. myserver.local?

Hi
I'm sorry but following steps in Yosemite Server help led me to nowhere.
Could you please explain how to create local virtual web host ex. myserver.local?
Thanks

Hi Sergey,
I assume that you mean virtual desktop storage location, which I don’t think that we can change this setting for an existing collection.
You can create a new collection, during the creation process, you will be able to select a different storage location for new VMs.
More information for you:
Single Image Management for Virtual Desktop Collections in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/10/29/single-image-management-for-virtual-desktop-collections-in-windows-server-2012.aspx
Geek of All Trades: VM-Hosted RemoteApps - New Best Practice for Virtual Desktops?
https://technet.microsoft.com/en-us/magazine/jj554307.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to create a virtual directory using EPG

Hi,
Can anyone tell me how to create a virtual directory in the EPG that points to a physical directory in the database server?
Thanks,
Andrew.

You can create an Oracle directory that points to an operating system directory in the database product... Does that help?
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How to create a Virtual Path ??

I want to know how to create a Virtual Path in My Application !!!
that is HTTP link that refer to existing folder in the file system
thanks

Alias can never be mount, but the virtual drive I want to create must be able to mount and unmount.
Desktop having both original and virtual drive.
My system is booted from 'Snow leopard' and I've an another drive, name 'Disk Testing' so by using a software I create the virtual drivre of 'Disk Testing' as you can see in the image. Both the drives are identical to each other and both are able to mount and unmount, they are having same data and attributes.
So I want to create exactly this kind of virtual drive by using any apple script or command.i.e without using any software.

How to create a virtual drive of a non bootable drive ?

How to create a virtual drive of a non bootable drive ?
through which we can see the preview of the drive without clicking on the original drive.

Alias can never be mount, but the virtual drive I want to create must be able to mount and unmount.
Desktop having both original and virtual drive.
My system is booted from 'Snow leopard' and I've an another drive, name 'Disk Testing' so by using a software I create the virtual drivre of 'Disk Testing' as you can see in the image. Both the drives are identical to each other and both are able to mount and unmount, they are having same data and attributes.
So I want to create exactly this kind of virtual drive by using any apple script or command.i.e without using any software.

How to create a Virtual provider in BI 7.0?

Hi friends!
I need create a virtualprovider (with SCM source system), but I find the option 'Create Virtual Provider' in the context menu only when the infosource is 3.x
How can I do it in 7.x?
Thanks in advance!
Edited by: SSap on Oct 28, 2009 9:11 PM

1.How can I do it in 7.x?
In BI7, just right click on any infoarea, and choose create 'virtual provider'. For direct access, you choose Virtual Provider with 'direct access'. There's an option to use the old R/3 infosource. What this means is that you can create an infosource with transfer rules and such, and when you create the virtual infoprovider, it will use the structure in the infosource automatically and the flow of data is automatically link R/3 with the transfer rules and the virtual infoprovider. Note that no update rules exist with this kind of setup.
In BI7 you have a more flexible approach in that you can create a transformation to configure the 'transfer logic' of your virtual infoprovideralong with start routine, end routine or any other transformation technique visible with using a transformation rule.
But using BI7 setup, you need to create a sort of 'pseudo' DTP, which doesn't actually do anything, meaning you do not 'execute' it to start a data transfer.
After all is done, you need to right click on the virtual infoprovider and choose 'Activate Direct Access'. If you use Infosource, go to the Infosource tab, and choose the infosource. If you're using BI7 setup, choose the DTP related to the transformation and save it.
a virtual infoprovider with direct access is really slow if you have a lot of records transmitting between the remote function calls.
Hope this helps
Manjula

How to Create and Use MQ Adapter(IBM MQ Series) in BPEL

Hi,
I am using Oracle SOA Suite 10.1.3.3.
I am very new to the Usage of MQ Adapter(IBM MQ Series) in BPEL.
what is the procedure to create our own Message Queues(i.e., MQ Series)?
It would be great if anybody share the idea of how to create the MQ and usage of same in BPEL Workflows.
is it mandatory to install websphere to create the MQ?
If possible,share the related docs for the same.
Any suggestions/views will be great.
Cheers,
Balaji
Edited by: user580285 on Nov 4, 2008 5:44 AM

Hi,
Kindly refer to the BPEL Dev Guide and in that please refer to the Appendix which contains MQ Series Adapter.
For this you need to provide the details like: -
MQ Server Host, port, queue manager name etc. Also you need not to install IBM Websphere MQ, you can work on it remotely as well.

How to create Headervariable for File adapter in 11g SOA Suite?

Hi All
My process in reading file and I wanted to know the exact name of the File.
In 10g, we have fileAdapterInboundHeader.wsdl and create HeaderVariable using message type used in this wsdl and can get file and directory name in this variable But in 11g we dont have any wsdl like this.
Can anybody give me some idea how to create Headervariable for Inbound file adapter to get file name?
Thanks
Vibzz

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

How to create azure virtual network by programming

Hi everyone
i want to create azure virtual network by programming
Doese anyone know how?
My way is create xml network config
and then call powershell
Set-AzureVNetConfig-ConfigurationPath
But if on manage portal is exist any network
It is impossible to create new azure virtual network
Thank in advance,
QP

Hello pham van quyen,
I am assuming that you are downloading the XML file from the portal and then editing it before you create the Virtual Network. You should be able to create a virtual network by using the set-azureVNETconfig command. But if you are connecting a gateway, please
use the Set-AzureVNetGateway.
I would suggest you to follow this tutorial that will give you information on Windows Azure Network using PowerShell:
http://blogs.technet.com/b/kevinremde/archive/2013/01/19/create-a-windows-azure-network-using-powershell-31-days-of-servers-in-the-cloud-part-19-of-31.aspx
If you are having issues with this, please let me know the related errors or failures.
Thanks,
Syed Irfan Hussain

How to create a Virtual Tour from a panorama

Hey All,
I'm trying to create a Virtual Tour from an already stitched 360 Panoramic interior photo (taken with a fish eye lens).
Are there any programs throughout the Adobe Suite/Cloud that will allow me to generate a virtual tour from this image, either automatically or manually?
Or is it best to look into other software(s)?

There are web services like Panoramio for that. I'm sure you could find some Flash plug-ins as well or some canned JavaScript stuff.
Mylenium

How to create a Virtual part list for the particular assembly.

Dear Gurus,
For our single purchasing order of particular assembly, we have multiple suppliers who can contribute in that Assembly. For example The purchasing order of Assembly X is given to supplier A and in that some part should be also ordered which should be delivered to supplier A from supplier B. In this situation, I want to create a virtual part list of the assembly which can be used to order both of this supplier seperately. So I do not forget to make purchasing order to the supplier B.
Thanks in advance.
Regards
Mayur

Dear Mayur,
One of option for you is: using document draft as the template for the part list of supplier B. Then create user alert whenever the supplier A need to be ordered.
Thanks,
Gordon

How to create a "virtual' album using pointers

Suppose I've imported a CD into iTunes. Later, I get the artist's "Greatest Hits" CD with some of the same songs. Rather than waste space in iTunes and on the iPod, I'd like to:
1) Exclude the duplicates when importing the "Greatest Hits" CD;
2) "Add" the excluded songs to the "Greatest Hits" (in iTunes) using pointers to the songs already imported from the first CD.
I have an album that is not available on CD and this would let me create a "virtual" version of it - as well as allowing me to listen to "Greatest Hits 1", "... 2" or "... 3".

iTunes does support linking a song to multiple albums. Unfortunately (at least for now) if a song is on more than one Album/CD title then you have to import a file from each one that has that album title. If this is something you'd like to see introduced in some future version of iTunes you can send feedback/feature requests directly to Apple at this link: Apple Product Feedback

How to create a Virtual drive?

Hai guys
i wanted to create a virtual drive for a remote computer in my system
is it possible to do this in java
kindly give the necessary info regarding this
thanks in advance
balki

I don't think it would be too hard with Servlets. Here is a sample upload Servlet:
http://java.freehosting.co.kr/opensrc/upload/
downloading from a servlet is easy by just creating a link.

How to create an Virtual resource Adapter in SUN IDM 7.1?

Similar Messages

Maybe you are looking for