How to create an XSD file

Hello Guys
Are there any instructions (Steps) out there to create an XSD file to use in SOAP adapter?
I have a table with the following fields and need to create an XSD file to import in ID to configure a sender SOAP adapter.
ID                Type   NUMC    Lenth 10
FNAME        Type   CHAR    Length 20
LNAME        Type   CHAR    Length 20
Any feedback or response will be highly appreciated.
Thanks
Ram

Hi,
Generally, adapters are independent of the message types that you want to exchange.
You have to create all necessary object in Integration Repository, here you can create either DataType based on an existing XSD or you can use data type editor, you can also import xsd as an external definition. Then you create message types, interfaces, mappings etc.
In Integration Directory you will configure earlier created objects and you will configure SAOP adapter as a communication channel of your Business System/Service.
Regards,
Jakub

Similar Messages

How to create an XSD file from xml

Hi,
Is there any way to generated an XSD file from an already existing XML file.
Does Jdeveloper 10g , has any feature to create the xsd file automatically?
Please advice
Regards

Here are the steps I took to create an XSLT transformation in XI 3.0:
1. I created my source and target XSDs using XMLSpy.
2. I created the XSLT mapping from source to target in XMLSpy (referencing the souce XSD schema).
3. I created another XSLT mapping to format the target into Excel XML.
4. Import the source and target XSDs in the IR's External Definitions
5. Zip each XSLT mapping (.xls) and import it into the IR's Imported Archives
6. Reference the XSL mappings in the Interface Mapping

How do you create an xsd file for an xml schema in BI Publisher?

Helllo.
I hope this is a really daft question for somebody..
How I create an xsd file to be used as an xml schema to attach to a Data Definition that Ive created? I've obv. got the xml and rtf files ready and attached. I've looked through the relevant docs (XML Publisher Report Designer's Guide.pdf & XML Publisher Administration and Developer's Guide.pdf) but can't find where..
Once this has been done then I can run the template via ORACLE Financials for the reports I've converted.
many thanks..
Steven

I don't think you need to have an XSD it's an optional field. If you really want to create one use this site: http://www.hitsw.com/xml_utilites/
I believe I answered your question, don't forget to give me the points.
Ike Wiggins
http://bipublisher.blogspot.com

WHAT IS THE BEST WAY TO CREATE AN XSD FILE (TO BE USED BY SOAP ADAPTER)

Dear friends
I have a simple scenario.
OUTBOUND DATA --> SOAP ADAPTER --> ( XI ) --> RFC ADAPTER --> INBOUND DATA
The XML file that I got from mapping area of IR (Design) is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_NAME_SOURCE xmlns:ns0="http://test3.com">
<FIRSTNAME>DAVE</FIRSTNAME>
<LASTNAME>SMITH</LASTNAME>
</ns0:MT_NAME_SOURCE>
If you notice, there are only 2 fields.
I need to create an XSD file and import it as an external object, which I can use for SOAP Adapter.
Which is the best way to create it.
Also, I need to know if there is any step by step of sending a message from XML SPY. I have downloaded this software, but am not able to undertand how to use this.
Hope to hear from any experts on this forum.
Thanks in advance
Ram

Hi Ram,
See the below blog..
It shows how to send SOAP message using XML Spy.
It also shows how to generate wsdl.
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Regards,
Sumit

How to create the XSD(XML Schema Definition) ?

Dear All,
     How to create an XSD for the following XML defined ?
<?xml version="1.0" encoding="utf-8"?>
<formulations name="Formulations">
    <formulation name="Formulation-1" type="formulation">
        <intermediateFormulation name="IntermediateFormulation-1" type="intermediate">
            <grade name="Grade-1" type="grade">
                <rawMaterial name="Raw Material-1" type="raw" />
            </grade>
        </intermediateFormulation>
        <grade name="Grade-1" type="grade">
            <rawMaterial name="Raw Material-1" type="raw" />
        </grade>
    </formulation>
</formulations>
Thank You,
Supreet R

Hi Sivaram,
Unfortunately, the 8.1 IDE did not have special tooling for schema generation.
You will need to create it by hand or using an external tool
If you are using an external tool to create the file within the schema project, you might want to disable the schema project auto build, which will be triggered every time a file save takes place
cheers
Raj

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

How to create a *.lnk file in the ipaq

how to create the .lnk file and where in the Ipaq?
if yes so how or can u write me an example
thanks itzik

-Connect your PDA to your Desktop
-Using windows Explorer you can make shortcuts by right clicking on the file you want...
Marco

How to create a .jar file in wlcs3.1

hello friends,
hi friends, im working on weblogic commerce server3.1 . i dont know how to create a .jar file in weblogic commerce server3.1. can any one knows send email to me.
thanks.
hari

$JDK_HOME/bin/jar (%JDK_HOME%\bin\jar) shows you the syntax
where JDK_HOME is your jdk installation directory.
Kumar
hari wrote:
hello friends,
hi friends, im working on weblogic commerce server3.1 . i dont know how to create a .jar file in weblogic commerce server3.1. can any one knows send email to me.
thanks.
hari

How to create a PAR file in Web Dynpro

Hi !!
Could any one tell me how to create a par file of the java application developed in WebDynpro..
thanks
ChandraSekar Maheswaran

Hi,
Refer the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/a-c/creating%20your%20first%20web%20dynpro%20application.pdf
Webdynpro concepts
Regards,
Tamil K

How to Create a PSD file in C#

How to Create a PSD file in C#

Converting an image file to .psd is easy in Aperture - just export the image version with one of the export presets "PSD - Original size" or "PSD - Half size".
But I suspect, that will not solve your problem, since you are trying to create a watermark in Aperture and probably want to create a transparent background for the watermark, to give it an arbitrary shape. That cannot be done in Aperture. Aperture does not support compositing and layers. If you want to create an image of an arbitrary shape with a transparent background you need to use a program that supports compositing. Since you do not have Photoshop, you could try the free GIMP instead (afaik, there is no Lion version of GIMP; the most recent version is Mt. Lion only; you could try if the Snow Leopard version works on your system).
Any program that you own, that lets you write or draw on a transparent background will be fine. The Watermark file does not necessarily need to be a psd-file. A png will also work. You can also use Preview to convert between image formats or to annotate an image with text.
Regards
Léonie

How to create a CSV file in java

how to create a CSV file in java

this is the code that I have used in a hp project:
private static final String DELIMIT = ",";
StringBuffer buf = new StringBuffer();
public void addString(String str){
buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim())).append(DELIMIT);
public void sendFile( String strData ,
                            String strTitle,
                            String strContType,
                            HttpServletResponse res ) throws IOException {
          byte[] _filedata=strData.getBytes();
          res.setContentType( strContType );
          res.setHeader( "Content-Disposition", "attachment;filename="+ strTitle );
                 DataOutputStream out = new DataOutputStream( res.getOutputStream() );
          out.write( _filedata, 0, _filedata.length );
          out.close();
public void addStringWhithReturn(String str){
          buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim()));
          buf.append( "\n" );
private String toEscapedStringLiteral( String charSeq ) {
          if ( null == charSeq ) {
               charSeq = "";
          return "\"" + charSeq + "\"";
....hope its help
kou

How to create a Batch file for java application ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

[http://static.springsource.org/spring-batch/]
Assuming you want to develop a batch application rather than actually just create a .bat file ..

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

How to create a PAR file from EAR file

Hi,
I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
How to access the EAR file in NWDS or J2EE ?
Thanks in Advance ,
By
Saravanan

Hi,
To create a iview,
log on to portal, New iView and select SAP webdynpro iview.
It will ask for namespace which is usually , local/Project Name
and application name is the name of the application.
We dont have to create par file for this requirement

How to create an XSD file

Similar Messages

Maybe you are looking for