How to Create and adjust masks with SDI output or Dual monitor output activated?

Hi all Speedgrade community.
For me one of the biggest problems I constantly encounter is managing masks within speed grade.
The tools are great, but if your using and external reference monitor for grading there is no way you can manage
masks and see what your doing on that "external" screen. Is there a way of activating dual screen or ddi output and keeping
the viewer active in the GUI?
When I know I'm going to be managing a lot of fine tuning grading, I usually always switch to Scratch or Resolve, and that breaks my Adobe CC round tripping workflow
AE<-->PP<-->SG
Thanks for any help.
KR
Leigh
iMac 27"
Aja IO 4K
DreamColor Z27X
HDLink 3D DisplayPort
Wacom Intuos

Hi Fran
Thanks for your response.
Is it just me, or does the pointer, when sent over to the SDI output, not respond as well
as when it's on the GUI?
Anyway, I'm quit confident we'll see an update to the way video is routed within Speedgrade
in a near future.
Leigh

Similar Messages

How to create a shape/mask with a hole in it?

In graphics illustration applications, it's common to support boolean operations on shapes and paths, like subtracting one object from another resulting in a compound path (like a group of sub-paths). This provides the ability to create shapes with "holes" in them where background content can show through. Is it possible to do this with two (or more) shapes (or masks) in Motion 5? For example, if I draw a rectangle shape and a smaller circle shape inset within the rectangle, to have the circle as a "hole" in the rectangle so that as the rectangle passes in front of other objects they show through the hole? If the answer is yes this can be done, can you please descibe how? Thanks!

It's possible to create a lot of sophisticated masking effects in Motion and there are two different ways that can be used in combination or separately (depending on the type of object being masked -- some objects won't allow shape masks, but almost all objects allow Image Masks.)
To set up what's going on below: the bottom layer is a Clouds generator. On top of it is a Spirals generator.
The region in the center where the '8' figure is starts as a rectangle to which 4 circle shape masks are added. The Shape Mask tool is in the one to the right of the Text ( 'T' icon) tool in the toolbar at the bottom of the Motion window. When an "eligible" layer is selected in the Layers List its options will be selectable, otherwise it will stay dimmed.
The first two circle masks added to the Rectangle are arranged one above the other (visually) and their Mask Blend Mode is set to Intersect and the Invert Mask options are checked for both. Two more circle masks are drawn for the same rectangle shape and placed to form the "holes" for the figure 8. Their Mask Blend Modes are set for Add.
The region of the Spirals that form the outer border is another Rectangle Shape drawn to form the bounds. To that Rectangle I added an Image Mask (right click on the Layer and select Add Image Mask.) To the Image Mask sub-layer I dragged the original rectangle containing the 4 circle masks.
Finally to the Spirals generator layer I added an Image Mask and dragged the second rectangle on the that sublayer.
When objects are added to an Image Mask, Motion will automatically turn off those layers from being visible in the canvas.
When working with masks, especially several levels of masking, sometimes you have to think in opposites. For instance, originally, the inner rectangle is solid and the figure 8 is the cutout. When added to the second rectangle, the "state" is reversed. Where you see the spiral are the solid portions of the final composite mask. If you select the Invert Mask option of the Spirals Image Mask, the entire thing "flips" (and the spirals would replace the clouds and vice versa).
Shape Masks have four available Blend Modes (Add, Subract, Replace and Intersect). Shape Masks are "all or nothing" cutouts (with exception of feathering).
Image Masks use Alpha, Individual Color channels (R,G, or B) or Luma to determine transparency. Image Masks can also use bezier shapes as sources, making almost the same as Shape Masks in this respect, except that Fill Opacity can be used to vary opacity within masked areas.
HTH

How to Create a Clipping Mask with LIVE TEXT?

Please, please, pease...there's has to be a way to do this.
I'm currently working on a project in which I have a background that has a large text layer above it. What I want to do is create a sort of "dynamic" clipping mask that essentially subtracts the shape of the text from the background yet remains editable as text in case I need to change the word or font.
However every way I've tried so far as been met with the backgrouns instead being constrained inside of the shape of the text...which is NOT what I want.
How can I do this while still having the text able to be edited?

An Opacity mask will work, but it will also move artwork from various layers to one layer.
You can get the same effect with a Layer Clipping mask and keep objects on their layers.
In this example only one layer is clipped, but you can drag as may as you want below the clipping layer.

How to create and access cookie with in iView ?

Hi,
I have created iViews using .Net PDK for SAP.
Is it possible to create a cookie using code of iView and use this cookie to access an external application.
Regards,
Vikas Khandpur

U cud add this code to the java iview:
setting a cookie:
Cookie fCooky = new Cookie("flag","false");
response.addCookie(fCooky);
fCooky.setPath("/");
Reading the cookie:
Cookie[] cook = request.getServletRequest().getCookies();
for (int i = 0; i < cook.length; i++){
Cookie cc = cook<i>;
if(cc.getName().equals("flag")){
response.write(cc.getValue()toString());
Iam not sure how u wud do it in a .NET Iview.
Sry!
Regards,
P.

How to create an embedded link with VBScript that references user website from Active Directory?

I have scoured the web for days and have not been able to quite come up with exactly what I need for this. I have created an Outlook signature deployment using VBScript which sets information in an already formatted Word doc using placeholders. (Ex. [Displayname],
[Initial], [City])
All of that works as expected, but now marketing would like to have an embedded link reference some of our users personal web pages. So the link would display some kind of standard text like "Click Here". Once clicked on the user would be redirected
to the personal web page of the person who sent the email. My problem is, I have no idea how to get the hyperlink to pull in the information from Active Directory...another problem is I know only enough coding to be dangerous so I am stuck.
Here is a sample of what I am working with, I am hoping someone can point me in the right direction. Thanks!
'----- Connect to AD and get user info -----'
Set objSysInfo = CreateObject("ADSystemInfo")
Set WshShell = CreateObject("WScript.Shell")
strUser = objSysInfo.UserName
Set objUser = GetObject("LDAP://" & strUser)
strDisplayName = objUser.displayName
strFirstname = objUser.FirstName
strLastName = objUser.givenName
strInitials = objUser.initials
strName = objUser.FullName
strTitle = objUser.Title
strDescription = objUser.Description
strOffice = objUser.physicalDeliveryOfficeName
strCred = objUser.info
strPOBox = objUser.postOfficeBox
strStreet = objUser.StreetAddress
strCity = objUser.l
strPostCode = objUser.PostalCode
strPhone = objUser.TelephoneNumber
strMobile = objUser.Mobile
strFax = objUser.FacsimileTelephoneNumber
strEmail = objUser.mail
strWeb = objuser.wWWHomePage
'----- Apply any modifications to Active Directory fields -----
'Use company info page if user does not have a Linked-In account specified
if strweb = "" Then strweb = "http://www.linkedin.com/company/58654"
'----- Open Word template in read-only mode {..Open(filename,conversion,readonly)} -----
Set objWord = CreateObject("Word.Application")
Set objDoc = objWord.Documents.Open(strTemplatePath & strTemplateName,,True)
Set objEmailOptions = objWord.EmailOptions
Set objSignatureObject = objEmailOptions.EmailSignature
Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
'----- Replace template text placeholders with user specific info -----
SearchAndRep "[DisplayName]", strDisplayName, objWord
SearchAndRep "[Name]", strName, objWord
SearchAndRep "[Description]", strDescription, objWord
SearchAndRep "[Title]", strTitle, objWord
SearchAndRep "[Street]", strStreet, objWord
SearchAndRep "[POBox]", strPOBox, objword
SearchAndRep "[City]", strCity, objWord
SearchAndRep "[State]", strState, objWord
SearchAndRep "[PostCode]", strPostCode, objWord
SearchAndRep "[Phone]", strPhone, objWord
SearchAndRep "[Mobile]", strMobile, objWord
SearchAndRep "[Fax]", strFax, objWord
SearchAndRep "[Email]", strEmail, objWord
'SearchAndRep "[Web]", strWeb, objWord
'----- Replace template hyperlink placeholders with user specific info -----
'SearchAndRepHyperlink "[email]", strWeb, objDoc
SearchAndRepHyperlink "[Web]", strWeb, objDoc
'----- Set signature in Outlook -----
Set objSelection = objDoc.Range()
objSignatureEntries.Add "NewCBSig", objSelection
objSignatureObject.NewMessageSignature = "NewCBSig"
'see note below if a different reply signature is desired
'objSignatureObject.ReplyMessageSignature = "Full Signature"
'----- Close signature template document -----
objDoc.Saved = TRUE
objDoc.Close
objWord.Quit

Can you ask a specific question? You have posted a script and noted you need a link but there is no question.
¯\_(ツ)_/¯

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How do create a slide show with both video and photos in elements 12

how do create a slide show with both video and photos in elements 12

Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to Create and adjust masks with SDI output or Dual monitor output activated?

Similar Messages

Maybe you are looking for