How to create and configure a user for MaxDB monitoring
Good Morning,
Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
Can you help me on this matter please?
Thanks.
Best Regards,
Pedro Gaspar
Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM
Hello Pedro,
Check the following website for further information:
http://maxdb.sap.com/doc/7_8/default.htm
Regards,
Eduardo Rezende
Similar Messages
-
How to create and configure proxies in ADF mobile using OWSM client agent?
Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
RajHi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj -
How to create and see the user interface of helloworld sample??
hello friends,
i have deployed the hello world sample
now i want to know how to create and see the user interface of hello world sample.
thanks and regards..If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
hth clemens -
How to create and configure JMSConnection Factory programatically?
Guys,
How to create and configure JMSConnection Factory programatically and (<b>NOT THRU CONSOLE</b>)?
There is an option using the JMSHepler to create the Queues.
Is there an option to create ConnectionFactories using the same or other classes?
anshukThere are no 8.1 "JMSHelper" extensions for creating conection factories (they've been added for 9.0). Instead, you can use a variety of more generic methods.
You can create configuration scripts using WLST or wlconfig or wlshell, or make direct calls from java into WebLogic's public JMX mbean APIs (all config tools, including the console, call into these APIs).
For a JMX example, see the implementation of the "JMSML" utility on dev2dev.bea.com. For WLST examples search for "+WLST +JMS".
Tom -
How To Install and Configure External Drivers for the JDBC & JMS Adapters
Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj -
How To Install and Configure External Drivers for JDBC & JMS Adapters"
hello ,
where can i download this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
thanks
best regards
pietro grecoHi Eleonore Rosenthal,
Could you please check the below links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
Regards,
S.Manu. -
How to create and test HTTP connection for proxy
HI
Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
How i will get sure that connection is working properly?
Thanks
DebrajHi Debraj,
You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi -
How to create and deploy portal applications for WebLogic TP10
Hi Friends:-) Thej here,
I want to know, how to create weblogic portal applications for tech preview version 10.
ThanksThe Tech Preview of 10.0 contains only WebLogic Server. WebLogic Portal 10.0 functionality is not contained in this preview. Therefore, you cannot create portal applications in this Tech Preview.
Thank you. -
How to create and configure a custom authorization service
Anyone has any idea how to create a custom authorization module? Can anyone tell me where can I find a documentation or some example how to do it?
I appreciate any idea.
Regards.The Access Manager developer guide on the Authentication SPI should be all you need to get started
http://docs.sun.com/app/docs/doc/819-4675/6n6qfk0nf?a=view -
How to create and configure a historical database?
Hello everyone!
I apologize if my question is duplicated,
or outside the context of the forum
and ask if it is that redirects
me to the right page!
I have a SQL Server Express 2008 R2 Database installed on a Microsoft Windows Server Standard 2008 R2 Server.
I know that SQL Server Express 2008 R2 Databases have a limit of 10 GB of data per Database.
I am going to create a JOB for Back up and a Log Shipping linking to other Server that has a SQL Server Standard 2008 R2 Server.
I know that when my SQL Srv Express goes to 10 GB into a Database I will need to clean it.
But what and how could I do to create a kind of "Historical Database", to receive all data from the SQL Srv Express, even when I clean database when it goes to 10 GB, without clean the historical database too?
Thanks!Probably Replication is your best option.
BOL: Replication Considerations (SQL Server Express)
Replication in SQL Server Express
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
How to Create and apply adjustment preset for printing
How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).
-
How to create and edit time curves for parameteric EQ
Hi all, I'd like to do something very basic, but I can't figure out how to do it.
I've got a video, and I'd like to apply some filters to an audio track, and sync it with the video. I've managed to load in the video, put my audio files on the multisession, and place the effects I want in place. I can't figure out the rest - i.e. animating the parameters. I'm used to animation software (such as aftereffects), where I can enable keyframing for a channel, goto a time on the timeline, change the value for a parameter and it's saved as a keyframe at that time.
I do have a bunch of midi controllers, but I'd rather hand edit these keyframes for accuracy as opposed to trying to record, there's only a few moments so should take me just a few seconds if I knew how to do it!
Cheers,Ah indeed, there is the familiar keyframe interface. That's great thanks, however I still couldn't find how to control these from the effect interface! I.e. I can edit the curves from there, but there's about 20+ parameters on the parameteric EQ, to have to go through keyframing it through the curves and not the interface would be nuts. I'd like to set all of the parametric EQ parameters (freq, Q, gain for each band) to be keyframable (which I can go through and do once if need be by manually setting a keyframe at time==0), but then I'd like to just use the parametric EQ interface, move the points around, and have the keyframes created. Currently what it seems what I have to do is:
- go through all 20 parameters and manually place a keyframe at time==0
- go to a new time on the timeline, and move all my points around in the parametric EQ interface
- go back to automation curves and go through all 20 parameters one by one clicking on the 'add keyframe' button for each parameter individually.
- go to the next time on the timeline, and repeat
Suffice to say this is tedious enough, but it gets even more interesting when:
The parametric eq interface does not update to show what the actual current value (From the automation) graph is. So if I want to slightly tweak a value (e.g. lift or drop a tiny bit), I can't do it, I can't see in the parametric eq window what the current value is. So I need to:
- goto the automation curve and find the parameter in question
- read out the value
- go back to the parametric window, and set that number in first
- and then edit it.
And then it gets even more interesting (this is probably a bug), because I'm having trouble editing current keyframes. I've found if I move a value on the parametric EQ window if there already is a keyframe in place I'd hoped it would just update the keyframe, but instead it does nothing. What I need to do is:
- first remove the keyframe
- then move the parameter in the parameq window
- then set the keyframe again.
If I move the parameter first, then remove the keyframe, then set the keyframe again, it won't get the new value. The parameter must be moved after the keyframe is removed. nuts.
I hope I'm just doing it wrong and there is an easy 'auto-set keyframes' option somewhere!
I'm running audition CC v6.0 build 732 64bit on windows 8.1 pro. -
How to create and register custom views for Bulk Export
In the FAQ of "Understanding Bulk Export" chapter, it says "You can define your own view object for export. However, before you can use your view object for export, you must register
and enable it as an export object in the Setup and Maintenance, Manage Export Objects task."
Task "Manage Export Objects" does not have a create or edit option. Do I have to use a particular rol to activate this options?As you state this is likely related to the permissions you have. Have you confirmed that you have the necessary roles mentioned in the documentation ? I think you would need at least "Application Implementation Consultant" and potentially others from the list also depending on the objects accessed.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
How to install and configure external drivers for JDBC and JMS adapters
Hi,
In that thread: [JDBC Driver for Progress Database;, N V Seshagiri gave a link to a "How to" guide that is not available now... can anybody send me the .pdf file?
I'm trying to install a JDBC driver (com.jnetdirect.jsql.JSQLDriver) with the visual administrator but I don't get it. I've found a lot of threads about that but I didn't get resultsHi,
Check out note 1138877 if on PI 7.1
For PI 7.0 check https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60237e74-ef19-2b10-5a9b-b35cc6a28e83
The "old" how to guide is available here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
Best Regards,
Daniel -
How to Install and configure SAP Java GUI on windows 2003 sp1.
Dear All,
Can I step-by-step on how to install and configure SAP GUI for Java on windows 2003 sp1.
Pls come with brief as I am completely new to Java and I am practicing the same on my home system first. I have latest SAP Java Pack with me.
Regards,
Dilluhi,
Please check this link and install accordingly
SAP GUI Family
Regards,
Naveen.
Maybe you are looking for
-
How to find out which app is stopping my MBP going in sleep mode?
Hi, I would like to find out the reason why my MBP does not go automatically in sleep mode. Could you help me? Thanks
-
ITunes PLAY/PAUSE Will Not Work After 10.5.4 Install
I have just installed Leopard 10.5.4 on my iMac G5 and iTunes player will not work. When I select a song, it will show in the player window, but, PLAY/PAUSE button will not function. I have checked iTunes Prefs and see nothing there that is not corre
-
I am trying to convert a PDF to Word doc-- it worked previously but now it won't-?
Trying to convert PDF to Word doc--- was able to do it before but now nothing shows up when I click on the downloaded file
-
Having trouble saving edited images back to organizer.
After I save images in Editor, they don't always "save". I get "IAC error failed message", and sometimes image doesn't save at all after numerous editing steps. Thanks in advance.
-
How to validate user input field?
I need to validate a user input field against a table. This field is not part of an EO but is used to update an attribute on an existing EO. My question is, where would I place the sql that would validate the user input value against the table? Is th