How to create and edit time curves for parameteric EQ

Hi all, I'd like to do something very basic, but I can't figure out how to do it.
I've got a video, and I'd like to apply some filters to an audio track, and sync it with the video. I've managed to load in the video, put my audio files on the multisession, and place the effects I want in place. I can't figure out the rest - i.e. animating the parameters. I'm used to animation software (such as aftereffects), where I can enable keyframing for a channel, goto a time on the timeline, change the value for a parameter and it's saved as a keyframe at that time.
I do have a bunch of midi controllers, but I'd rather hand edit these keyframes for accuracy as opposed to trying to record, there's only a few moments so should take me just a few seconds if I knew how to do it!
Cheers,

Ah indeed, there is the familiar keyframe interface. That's great thanks, however I still couldn't find how to control these from the effect interface! I.e. I can edit the curves from there, but there's about 20+ parameters on the parameteric EQ, to have to go through keyframing it through the curves and not the interface would be nuts. I'd like to set all of the parametric EQ parameters (freq, Q, gain for each band) to be keyframable (which I can go through and do once if need be by manually setting a keyframe at time==0), but then I'd like to just use the parametric EQ interface, move the points around, and have the keyframes created. Currently what it seems what I have to do is:
- go through all 20 parameters and manually place a keyframe at time==0
- go to a new time on the timeline, and move all my points around in the parametric EQ interface
- go back to automation curves and go through all 20 parameters one by one clicking on the 'add keyframe' button for each parameter individually.
- go to the next time on the timeline, and repeat
Suffice to say this is tedious enough, but it gets even more interesting when:
The parametric eq interface does not update to show what the actual current value (From the automation) graph is. So if I want to slightly tweak a value (e.g. lift or drop a tiny bit), I can't do it, I can't see in the parametric eq window what the current value is. So I need to:
- goto the automation curve and find the parameter in question
- read out the value
- go back to the parametric window, and set that number in first
- and then edit it.
And then it gets even more interesting (this is probably a bug), because I'm having trouble editing current keyframes. I've found if I move a value on the parametric EQ window if there already is a keyframe in place I'd hoped it would just update the keyframe, but instead it does nothing. What I need to do is:
- first remove the keyframe
- then move the parameter in the parameq window
- then set the keyframe again.
If I move the parameter first, then remove the keyframe, then set the keyframe again, it won't get the new value. The parameter must be moved after the keyframe is removed. nuts.
I hope I'm just doing it wrong and there is an easy 'auto-set keyframes' option somewhere!
I'm running audition CC v6.0 build 732 64bit on windows 8.1 pro.

Similar Messages

How to create and edit anomalous tables in DIAdem? Such as the example list.

How to create and edit anomalous tables in DIAdem?
Can the tables be edited as in MS Word?
帖子被yangafreet在08-21-2007 10:28 PM时编辑过了
Attachments:
table example.doc ‏26 KB

Hi yangafreet,
There is no way I know of to create a DIAdem table that looks like the table in your Word document.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to create and edit a .ini file using java

Hi All...
Pls help me in creating and editing an .ini file using java...
thanks in advance
Regards,
sathya

Let's assume the ini file is a mapping type storage (key=value) so lets use Properties object. (works with java 1.4 & up)
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.Properties;
public class Test {
     private static Properties props;
     public static void main(String[] args) throws IOException {
          File file = new File("test.ini");//This is out ini file
          props = new Properties();//Create the properties object
          read(file);//Read the ini file
          //Once we've populated the Properties object. set/add a property using the setProperty() method.
          props.setProperty("testing", "value");
          write(file);//Write to ini file
     public static void read(File file) throws IOException {
          FileInputStream fis = new FileInputStream(file);//Create a FileInputStream
          props.load(fis);//load the ini to the Properties file
          fis.close();//close
     public static void write(File file) throws IOException {
          FileOutputStream fos = new FileOutputStream(file);//Create a FileOutputStream
          props.store(fos, "");//write the Properties object values to our ini file
          fos.close();//close
}

How to create and configure a user for MaxDB monitoring

Good Morning,
Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
Can you help me on this matter please?
Thanks.
Best Regards,
Pedro Gaspar
Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM

Hello Pedro,
Check the following website for further information:
http://maxdb.sap.com/doc/7_8/default.htm
Regards,
Eduardo Rezende

How to create and test HTTP connection for proxy

HI
Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
How i will get sure that connection is working properly?
Thanks
Debraj

Hi Debraj,
You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi

How to create and register custom views for Bulk Export

In the FAQ of "Understanding Bulk Export" chapter, it says "You can define your own view object for export. However, before you can use your view object for export, you must register
and enable it as an export object in the Setup and Maintenance, Manage Export Objects task."
Task "Manage Export Objects" does not have a create or edit option. Do I have to use a particular rol to activate this options?

As you state this is likely related to the permissions you have. Have you confirmed that you have the necessary roles mentioned in the documentation ? I think you would need at least "Application Implementation Consultant" and potentially others from the list also depending on the objects accessed.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How to create and deploy portal applications for WebLogic TP10

Hi Friends:-) Thej here,
I want to know, how to create weblogic portal applications for tech preview version 10.
Thanks

The Tech Preview of 10.0 contains only WebLogic Server. WebLogic Portal 10.0 functionality is not contained in this preview. Therefore, you cannot create portal applications in this Tech Preview.
Thank you.

How to Create and apply adjustment preset for printing

How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

BAdI for RMWB u2013 Create and Edit recipes

Hi Gurus,
I am looking for BAdI or User Exit - RMWB u2013 Create and Edit recipes .
My scenario is somethng like:
Need to specify with the logic in order to execute the check on the recipes before they are being transformed, i.e. method has to get triggered when system status in the Recipe is to be changed from In-Process (ISTATUS = u201CI6000u201D) to Processing closed/Completed (ISTATUS = u201CI6001u201D) or Released (ISTATUS = u201CI6003u201D)
Please suggest any.
Many Thanks,
Madan

Hi Roland,
Thank you !!
I can use the method "CHECK_STATUS_CHANGE", it is indeed getting triggered.
Although I have a query regarding the usage of the same method.
When I go ahead and create new custom implementation, i need to de-activate the existing standard implementation - IMPL_RCP_VAL_CHECK and activate the newly created custom implementation.
When I do that the code inside the standard method - CHECK_STATUS_CHANGE will be gone (since i will be using the custom implementation and adding my code inside the method).
So can you please suggest how to do the Impact analysis on this one.
Many Thanks,
Madan

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit between both.

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit and exchange between both types of operating systems.

Your Windows system will not open any Pages, Numbers or Keynote documents. No applications exist for Windows that can open those formats. You will need to export your documents in Word, Excel and PowerPoint formats, respectively, before you'll be able to view and edit the documents on your Windows system. The iWork documents can natively open Word, Excel and PP documents, though there are limitations on what can be imported (for instance, Numbers does not support all possible Excel functions). Consult the documentation for the relevant iWork application for details on importing and exporting.
If you are asking how to get the documents from one system to the other, then there are several ways to do that, including file sharing, using an external drive (hard drive, USB flash drive), or emailing the documents to yourself. Which would be best for your situation I can't say without more details about your usage.
Regarsd.

How to create a vi that counts for example 3 - 10 pulses in and then give a 1 puls out

how to create a vi that counts for example 3 - 10 pulses in and then give a 1 puls out.
I'm working with Labview 6.1
Running with Labview 6.1
Fieldpoint hardware

Hi,
You should be more specific, what kind of hardware you are using ???
Which kind of pulse you are measuring ?? You are saying that you want to count a number of pulses and then when you get to a limit (which will be between 3 and 10) you want to output a pulse ?
Andre Oliveira

How to open and close posting period for both material , n invoicing

HI
how to open and close posting period for both material , n invoicing , AM NEW TO SD , SO ALL DOUBTS I DO POST IN HERE PLEASE DONT MIND

Hi Sunaina
Period Open T.code: MMP1
Period Close T-Code: MMPV
Automate the opening of MM periods
How can you automate the monthly opening of MM periods (transaction MMPV - program RMMMPERI) with
SM36?
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Reward if useful to u

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

How to create and edit time curves for parameteric EQ

Similar Messages

Maybe you are looking for