How to Create and export motion data from After effects CC to Flash CC

Hi there ,
Basically what I've got here is as follows.
I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
and also to give a motion data to be used in Flash CC - to assemble the original animation.
Can anybody help me out with this?

Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
Here's more information:
http://forums.adobe.com/message/5555577
Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

Similar Messages

How should i build and export a composition from After Effects to be dropped into a Premiere project

I've built a project in Premiere which i plan to burn to DVD. It's exporting at 1280x720. Pixel aspect ratio is 1.0. I'm exporting with MPEG2 setting.
After Effects won't let me make a project with 1.0 pixel aspect ratio, and it isn't letting me use MPEG2... it's giving me this medial 02 error...
Help!

Well where should I start? AE will allow you to use square pixels. In fact the 1280 X 720 frame size is the HDV/HDTV 720 P preset and it's square pixels.
You don't set the compression until you render and, if you want the highest quality, you don't render MPEG formats of any kind using the Render Cue, you export them using the Adobe Media encoder. Where is After Effects telling you you can't use MPEG2??? How are you trying to get there.
If you are going directly to Premiere Pro (Which only exports or renders using the Adobe Media Encoder) you don't even need to render, you can just import your AE Composition into PPro.
Secondly, A DVD is not High Def in any form. DVD's are all 720 X 480 pixles (in NTSC countries). The only options are widescreen or normal.
Please read the sections on Rendering in the help files.

How to read and write a data from extrenal file

Hi..
How to read and write a data from extrenal file using Pl/sql?
Is it possible from Dyanamic Sql or any other way?
Reagards
Raju

utl_file
Re: How to Create text(dat) file.
Message was edited by:
jeneesh

How do I export a video from After Effects CC to an iPhone? I'm using a PC.

How do I export a video from After Effects CC to an iPhone? I'm using a PC.

Short answer, there is no simple "export to iPhone", but if you just want to have a movie that you can watch on you iPhone, just send yourself an attachment via email (other than .avi) and save it to your phone.
You can also use dropbox as an option.
With an app, you could mount your iPhone as an external drive. (check out iExplorer)
Also: check AME for h264 variations before you send it to yourself. There are presets for iPhone compression.

Problems exporting Animation codec from After Effects CS3 to FCP

Hi,
I wonder if anybody can help: I am having troubles with video transfer from After effects CS3 to FCP 6
my workflow is to edit and export in FCP as quicktime movie - work on the clip in AE and then export as Animation/best quality/Millions of colors+. The footage is SD Pal 1024 x 576.
the problem is that the files don't seem to play back properly in quicktime - very jagged and lots of ghosting. I assume this is due to the memory heavy features of the codec.
However any file over 10 seconds will not be imported into FCP natively and a message reads final cut pro does not support this file type.
I overcame this by opening the clip in quicktime and then exporting again with exactly the same settings - this then reads in FCP - although this seems over the top
I now want to work with a 10 min finished comp in FCP but when I try to do this it picks up the ghosting that had appeared when playback in quicktime. However when rendered/ exported from the FCP timeline it retains the ghosting
in short I can burn a successful DVD of the footage as is from AE but it is not suitable to FCP.
I have tried exporting the clip in quicktime as quicktime DV pal but this retains the ghosting. Is this a hard ware problem or is my work flow wrong?
thanks
Paul

Converting from A to B means either a lossy conversion or a significant increase in storage requirements (up to 5x with DV as the starting point). You are best served with keeping conversions to a minimum.
> cause this compressor doesn't like images
What is that based on?
> in several forums I have red that "automatik" inside of encore does often not work properly
This is in contradiction with the general feelings on this forum.

Exporting Transparent Background From After Effects

I am working on a FCP project which I have also made an animated lower third in After Effects. However, I do not know how to export from after effects preserving the transparent background- it always just ends up as being black...
Thanks

From AE, you must use the Animation codec set to millions of colors+

How to create and export a sharepoint list connection file to excel connection file library from power pivot?

Hi All,
I'm new to SharePoint and Power BI.
I've to use share point 2013 lists to create power view reports. For that, I need to create Power Pivot in Excel 2013.
I'm fine with the above. We normally take a data feed of a list and create connection to that. We need to create a connection file (.odc) and export it into a excel file connection library of Share point. The connection to be made to share point list. The
power pivot will be having multiple related lists.
How can I create a connection file which is referring to share point list
Please suggest.
Regards,
Julie

Hi All,
Finally, I could find the answer for this question after a long search.
First of all, open a new excel file in server.
Data-->From other connection-->From data connection wizard-->data feed-->Location of the data feed-->
http://sharepointsite/sitename/_vti_bin/ListData.svc
-->next-->select the lists which you need-->next-->only create connection-->properties--->export connection file
-->ok
The connection file has been created and .odc file exported to the specified location.
Open power pivot and check the connection in existing connections.
Exported file has to be uploaded in Excel file connection library of share point 2013. So that you can refer the same in this excel file when you upload it into share point.
Regards,
Julie

HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

Hi experts ,
I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

Hi Sushma,
how to configure sendor JDBC adapter ..
Select adapter type is JDBC..
Give the Transport Protocol:.JDBC 2.0 (Example)............
Message Protocol:...JDBC...........
IAdapter Engine : Integration Server
Processing Parameters..
Quality of service.....(Example)..Exactly once
Poll Interval .... Example ..10
Query Sql statement..Example ..select * from XXXXX
Document Name.....
Update Sql stetement.....
Thanks,
Satya
Reward points if it id useful...

Audio is missing when I export longer mp4s from After Effects File via AME. Can you help?

I’m using After Effects to colour correct and add some titles to long .mov files. (typically 45 mins to 1.5 hours in length).
I am then rendering out to the Vimeo 720 25 preset (.mp4s with h.264) using AME.
The problem occurs when I try to render out larger compositions (anything over an hour).
I start to get audio issues, such as no audio, glitchy audio or audio that only starts after 40 minutes for example.
The shorter compositions work fine. And RAM previews always work fine.
(I’m using Creative Cloud on an iMac running Mountain Lion.)
Has anybody experienced this bug, or know a way to fix it?
Thanks

Hi,
I tried to reproduce this issue by adding a shape and a table in Publisher, export it as an index.htm file, copy and paste the HTML code which in the <head>
tag and <body> tag only.
It turns out that the original design is gone.
When digging into the HTML code, I found that the HTML code from Publisher might not be compatible with SharePoint page.
For example, a shape which is added in Publisher, the corresponding HTML code would be something like:
<span style='
width:228px;height:231px'><img alt="shape here" width=228 height=231
src="index_files/image296.png" v:shapes="_x0000_s1026"></span>
We can see that, the value “src” attribute of the <img> tag represents a relative path which can’t be found in the existing SharePoint site structure, it means
that the shape will not appear in SharePoint page.
In Publisher:
In SharePoint page:
As a common practice, I would suggest you create a new HTML file using Visual Studio or SharePoint Designer and examine the design in browser during the development,
it would be easier to compose a valid and browser-compatible HTML file.
Two articles below about tips on how to write good HTML for your reference:
http://learn.shayhowe.com/html-css/writing-your-best-code/
http://sixrevisions.com/web-standards/20-html-best-practices-you-should-follow/
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Export to FCP from After Effects

I am exporting an After Effects file to FCP that I have created. What is the best setting in After Effects to get the best picture into FCP. I have been using the DV setting on rending out from AE but When I import in to FCP I get Lines running through the video. I have tried using De-interlace effects on it but it does not seem to help much. Is there a better setting for export from AE to FCP. Any help would be great.

Depends.
What is your sequence preset in FCP?
I'm assuming DV NTSC. I would render to the Apple DV codec so that FCP will play back the clip without rendering. If you are field rendering choose Lower Field First, and if you're field rendering you may also need to be separating the fields on your footage items, also Lower Field First. And of course your comp must be 720x480 29.97fps.
Unfortunately there are many places where you can screw up the render in AE, not just the render stage. But as long as you do everything right the playback in FCP should be good.

Camera rotation problem when exporting a camera from After Effects CC to Cinema 4D 15

Looking around, this problem is happening to a few people, with no satisfactory solution.
Basically, when I export an AE camera / project into C4D, everything looks great... till I notice that the camera's horizon will jump a few times.... so that if it were tilted 20 degrees to the left, it will pop to be tilted 20 degrees to the right.
It's definitely not in the footage- it's a simple walk down a hallway. The AE track is fine- it's only in the C4D track that the problem arises.
I've tried creating new AE projects, re-exporting, etc. I'm running AE CC and C4D 15.
Anyone ever figure out how to fix / get around this?
Thanks!

It's 13.2.0.49... I just installed it yesterday.
C4D is R15.008
I'm wondering if I would have the same issue with C4D Lite, but I can't figure out how to open it (I assume it downloaded with AE). Rather than launch Lite, AE seems to automatically find C4D 15 and open that.
I've been using AE and C4D for over 15 years, so I'm quite familiar with both. The bug is odd and quite disappointing, as I bought this version of AE specifically so that I could track footage and export the camera info into C4D.
Any help on this would be greatly appreciated!

Export Camera Data to After Effects CS3

I can't find any mention of this any where, but is there any way to export the camera data inside Motion into after effects? I'm creating lots of nice particle effects, but i need to keep the backgrounds inside After Effects, due to complex shadows etc

cheers Mark..
i enjoyed your Ripple Training series by the way..

Creating and Selecting a line in After Effects CC?

OK, So I suppose this is a two part question...
But there is a little thing in After Effects CC that is annopying me alot, and it could just be me, and the way I've been doing things...
1) The way I have creating a simple Line in After effects, is by using the pen tool, placing two points, and then just using a stroke on the Shape Layer, and no fill. Is this the most efficient way to creating a line in After Effects? It's what i have always done, and it's not until CC that it has been a pain.
2) The reason why it's inconveniencing me is when i try to select that Shape Layer in the Comp Viewer! For some reason, in CS6, when i wanted to select that line, i could just click on it, and it selects the layer, Now, when i click on the line i just made, nothing happens, no where in the line that i can click or highlight will it select the layer of that line, Instead, I have to click the very center of the composition for some reason. there is small unseen point there that i either have to click exactly, or click and drag in that area, in order to select the layer, which gets annoying if there are many line at any given moment. This point is also where the anchor point for the layer is placed.... Is there any way to change this? To be able to change some setting so that when i click on the line itself, it selects it, and to have the Anchor point be placed in the center of the two point i make?

But I do this kind of thing all the time. The last 5 projects involved 8 stroked horizontal and vertical shape layers drawn with the path tool that I had to move around the screen. I also had a bunch of little shapes that were only 5 X 5 pixels. These layers are nearly impossible to grab in the comp window at even 200% zoom factor without inadvertently grabbing the wrong layer or scaling the layer when you try to move it in the comp window.
It is like trying to drive a screw with a hammer. It will kind of work but you will do a much better job if you use a screwdriver and the screw will remain undamaged. Hence, selecting small assets in the timeline and moving them around with the transform properties from the timeline is using a screwdriver. Using the direct selection tool is just the wrong tool for this and it always has been. You have to have some real estate to grab on to if you expect to move a layer without scaling it.
You can mitigate the scaling problem for small layers by adding a simple expression to scale so the layer always stays at 100% but this will just automatically fix the scale problem and won't help moving the layer around in the comp window very much.

Both CS6: Trouble exporting to Premiere from After Effects?

Hello. I'd like to start off by saying that I am new to the community and new to using this software, so please pardon if I come off as ignorant. However, I need help urgently.
I am trying to export an After Effects project into Adobe Premiere (using File -> Export -> Adobe Premiere Pro Project). I am coming up with the following error message when I try to open it using Premiere:
"This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type".
I would think that my Premiere preferences would be irrelevant as I cannot even access them unless I have a project opened. However, here are my project settings for After Effects:
Time Display Style:TimecodeUse Media Source
Color Settings:
Depth: 8 bits per channel
Working Space: none (could this potentially be the issue?)
Audio Settings:Sample Rate: 48.000 kHz
All of the video files used are .mp4.
I will be willing to rapidly provide more information if necessary. Thanks in advance for helping out.

Don't export!
Open your Premiere Pro project, go to File > Adobe Dynamic Link > Import After Effects Compositon. Then navigate to the aep file, select the compositon and it will import the AE link into your pronect bin. Then you can change the file in AE and when you save, the changes will show in PPro. There seems to be a bug with the dynamiclink.exe server that won't show the compositon as rendered on the timeline. I'm hoping Adobe will fix it soon as I've reported it on the bug site.

Can't import and export MPEG2 files in After Effects and Premiere Pro.

I don't know when started, but a few days ago my Premiere Pro and After Effects don't recognise MPEG2 files.
When I try to open a Premiere Pro with a MPEG2 file in it: "This project contained a sequence that could not be opened. No sequence preview preset file or codec be associated with this sequence types"

Just to verify that the files are not corrupt...
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Also... does your PPro show the option to de-activate? (having the de-activate option available means your version has not "lost" activation)

How to Create and export motion data from After effects CC to Flash CC

Similar Messages

Maybe you are looking for