How to create and register custom views for Bulk Export

In the FAQ of "Understanding Bulk Export" chapter, it says "You can define your own view object for export. However, before you can use your view object for export, you must register
and enable it as an export object in the Setup and Maintenance, Manage Export Objects task."
Task "Manage Export Objects" does not have a create or edit option. Do I have to use a particular rol to activate this options?

As you state this is likely related to the permissions you have. Have you confirmed that you have the necessary roles mentioned in the documentation ? I think you would need at least "Application Implementation Consultant" and potentially others from the list also depending on the objects accessed.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Similar Messages

How to create and configure a user for MaxDB monitoring

Good Morning,
Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
Can you help me on this matter please?
Thanks.
Best Regards,
Pedro Gaspar
Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM

Hello Pedro,
Check the following website for further information:
http://maxdb.sap.com/doc/7_8/default.htm
Regards,
Eduardo Rezende

How to create and register a new page in sshr

hello all,
I am a bit new with OAF.
would like to knw hw can one customize/personalize (don't know the right words) the Online payslip in xx_legislation.Any documents,ppts,or links please share it with me.
All your assistance will be of grate help to me.
Thank you

I amn't the one you are thinking I might be. :) Anyway its a forum for friends... and we know eachother now..
As far as the issue goes, you might need to extend the existing VO (need to use Jdeveloper for this) and then substitute the VO. Let me try to summarize the steps in brief:
1. Create a Jdeveloper project. Have the xml and class files for the VO being extended and its related EOs, AMs etc.
2. Create a custom bc4j package with a very similar path to that of the standard VO, but have a custom top. That is to say have <prod_name>.oracle.apps. instead of oracle.apps...
3. Create a custom VO by extending the Standard VO. This can be done very easily in the VO wizard.
4. Modify the existing VO query by including the new columns and their joins (do check the query in SQLplus earlier and be sure it works fine).
5. Once VO is ready, navigate to the jpx file and find the subtitution link.
6. Select the standard VO and the custom VO that substitutes the standard VO. Click on Add to create the substitution.
7. Move the jpx file on javatop and run JPXImport command.
8. Also move the custom VO(xml and class files) to the application server in correct directory structure.
9. Bounce apache.
That overview should help. Details can be found in the Dev guide.
Regards
Sumit

How to create and test HTTP connection for proxy

HI
Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
How i will get sure that connection is working properly?
Thanks
Debraj

Hi Debraj,
You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi

How to receive and evaluate customer feedback for Makreting Survey?

Dear all,
We need to send a Customer satisfaction survey to a target group and we have to get the feedback from customers.
How can we know that, how many customers selected the same answer for a specific question, and how can we evaluate the answers based rating factor.
I know 'Evaluate without BIW' option, but how this report looks like?, and can we get the detailed analysis from this report. We are using CRM 7.0 and we don't have BIW in our Landscape
Please educate me in the above scenario as it is an immediate requirement from client side. Your help will be highly appreciated.
Best regards,
Raghu ram

The SAP Library has a good starting point with examples that should offer some insight into how to work with the Campaign Automation, which is how you could process the specific survey responses...otherwise the area you've already found is where you can check for more generalized data (How many people answered Yes/No, etc.)
Specific answers are typically tracked by adding the respondents to various Target Groups for subsequent processing.
http://help.sap.com/saphelp_crm60/helpdata/en/46/0ac0da293114dbe10000000a155369/content.htm

How to create and deploy portal applications for WebLogic TP10

Hi Friends:-) Thej here,
I want to know, how to create weblogic portal applications for tech preview version 10.
Thanks

The Tech Preview of 10.0 contains only WebLogic Server. WebLogic Portal 10.0 functionality is not contained in this preview. Therefore, you cannot create portal applications in this Tech Preview.
Thank you.

How to Create our own Custom Design for UI Elements in WebDynpro Java

Hi Experts,
As of now i am using the Standard design for the UI Elements in the WebDynpro Java Applications.
For example:
header1,header2,monospace etc are available in design for UI Elements.
Now i want to give my custom design to the UI Elements.
So how can i create this. and Is it possible to create in NWDS.
Thank You.
DS

Hi DS
Eclipse Theme Editor for NetWeaver 2004
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a026b4ce-de48-2a10-7285-fb457ee6c7ed
Eclipse Theme Editor for NetWeaver 7.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/136dd890-0201-0010-1b9d-bd09a0d3b1d8
Hope this will be use ful for u
Regards
sriram

Create and Register Custom Property Panels

Is there anyone who worked on "Custom Property Panel" in Webcenter? However, I have tried something using the following link but it seems not working.
http://docs.oracle.com/cd/E16340_01/webcenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDCJGEC
Can anyone suggest me the possible approaches step by step?
Thanks in advance.

Hi again!
Section 20.2, "Creating Oracle Composer Add-Ons": Refers to Oracle Composer buttons that appears in top of it like "Page properties" or "View". In this image http://4.bp.blogspot.com/-o0-wHhGzAg/TrgeohaGM8I/AAAAAAAAASQ/yfQqqU8faY/s1600/Composer6.png "Chane Logo" is a Composer addon (panel).
Section 20.3, "Creating Custom Property Panels": Refers to add more tabs/configurations by default provided by Oracle Composer to configure the components added in the page. For example "Parameters" tab. In this image http://1.bp.blogspot.com/-G5lnUwO_mhM/TrgeqZlTT_I/AAAAAAAAASY/vTvznOakpL8/s1600/Composer7.png "Display options" and "Style" are property-panels
Regards.

How to Create and apply adjustment preset for printing

How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

How to create and edit time curves for parameteric EQ

Hi all, I'd like to do something very basic, but I can't figure out how to do it.
I've got a video, and I'd like to apply some filters to an audio track, and sync it with the video. I've managed to load in the video, put my audio files on the multisession, and place the effects I want in place. I can't figure out the rest - i.e. animating the parameters. I'm used to animation software (such as aftereffects), where I can enable keyframing for a channel, goto a time on the timeline, change the value for a parameter and it's saved as a keyframe at that time.
I do have a bunch of midi controllers, but I'd rather hand edit these keyframes for accuracy as opposed to trying to record, there's only a few moments so should take me just a few seconds if I knew how to do it!
Cheers,

Ah indeed, there is the familiar keyframe interface. That's great thanks, however I still couldn't find how to control these from the effect interface! I.e. I can edit the curves from there, but there's about 20+ parameters on the parameteric EQ, to have to go through keyframing it through the curves and not the interface would be nuts. I'd like to set all of the parametric EQ parameters (freq, Q, gain for each band) to be keyframable (which I can go through and do once if need be by manually setting a keyframe at time==0), but then I'd like to just use the parametric EQ interface, move the points around, and have the keyframes created. Currently what it seems what I have to do is:
- go through all 20 parameters and manually place a keyframe at time==0
- go to a new time on the timeline, and move all my points around in the parametric EQ interface
- go back to automation curves and go through all 20 parameters one by one clicking on the 'add keyframe' button for each parameter individually.
- go to the next time on the timeline, and repeat
Suffice to say this is tedious enough, but it gets even more interesting when:
The parametric eq interface does not update to show what the actual current value (From the automation) graph is. So if I want to slightly tweak a value (e.g. lift or drop a tiny bit), I can't do it, I can't see in the parametric eq window what the current value is. So I need to:
- goto the automation curve and find the parameter in question
- read out the value
- go back to the parametric window, and set that number in first
- and then edit it.
And then it gets even more interesting (this is probably a bug), because I'm having trouble editing current keyframes. I've found if I move a value on the parametric EQ window if there already is a keyframe in place I'd hoped it would just update the keyframe, but instead it does nothing. What I need to do is:
- first remove the keyframe
- then move the parameter in the parameq window
- then set the keyframe again.
If I move the parameter first, then remove the keyframe, then set the keyframe again, it won't get the new value. The parameter must be moved after the keyframe is removed. nuts.
I hope I'm just doing it wrong and there is an easy 'auto-set keyframes' option somewhere!
I'm running audition CC v6.0 build 732 64bit on windows 8.1 pro.

How to create and use custom exceptions with ADF JClient

Hi
The forms developed using ADF JClient by default use pessimistic locking and throw an AlreadyLockedException if more than one user tries to modify the same record. I need to customize this exception so as to display the name of the Oracle user who has locked the record. Is this feasible? If yes, how can I achieve this.
PS: I've already tried creating my own messageBundle to customize the error messages. Even though I can change the message there, I'm unable to find any information in AlreadyLockedException or JboException that directly gives me the user or the oracle session id that has locked the record.

T A,
this information is not exposed through the JDBC driver and thus nit available to BC4J. So the answer is that you can't get this information.
Frank

How to create an Internal Customer for Ineterplant stock Transfer

Daer Gurus,
Please tell me how to create an Internal Customer for Interplant stock transfer.
Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
How to maintain the Two plants as supplier and third one as a receiver plant.
which account group I should use and what details I have to use for it ? Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
thanks in advance
regards,
Sanjay

Hi,
Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
Your STO will have following 4 flows.
1. AAAA - CCCC
2. AAAA - BBBB
3. BBBB- CCCC
4. BBBB- AAAA
you need to do the following settings...
1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
(Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
Following is the example settings required for our scenario 1.
AAAA will be a supplying plant and CCCC will be rec. plant.... for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
Hope this will be useful to you.
Thanks,
Muthu

How to create list of a View's column names and source

Using SQL 2005, 2008, and 2012
How to create list of a View's column names and source. For the following example would like to @Print something like the following. Does anyone already have some code to do this? I realize there are probably some gotchas, but the views that I am looking
at to use this follows the code snippet pattern below.
DBACCT.[Account Number]
dbo.ConvertDate(DBACDT). [Boarding Date]
DBXES.DBXES
CREATE VIEW [dbo].[v_ods_DBAL]
AS
SELECT DBACCT AS [Account Number], dbo.ConvertDate(DBACDT) AS [Boarding Date], DBXES
FROM dbo.ods_DBAL

The column information can be obtained from INFORMATION_SCHEMA.COLUMNS view using logic like below
SELECT c.COLUMN_NAME,c.DATA_TYPE
FROM INFORMATION_SCHEMA.COLUMNS c
WHERE EXISTS (SELECT 1
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = c.TABLE_NAME
AND TABLE_TYPE='VIEW')
http://technet.microsoft.com/en-us/library/ms188348.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

Creating 2 table maintainance views for one custom table

Hello All,
I want to create 2 table maintainace views for one custom table.
I know how to create table maintainace but I want to know whether we can create only one maintainance view or we cal also create 2 maintainace views for a single custom table.
Regards
Mahesh

Hello,
You can create as many maintenance views one one table as you want.
Kind regards,
Bart

How to create and register custom views for Bulk Export

Similar Messages

Maybe you are looking for