How to Create and Save a workbook on Enterprise Portal

Hi,
I need to find out how I can create and save a workbook (for a query) in Enterprise portal. Can we save a work book and run it in the same format?
Thanks

Hi,
refer below thread
Re: How do you save the Workbook as View when the workbook do not have quer
also see sap help
http://help.sap.com/saphelp_nw04/helpdata/en/4d/f3fa40badbf36fe10000000a1550b0/frameset.htm
Thanks

Similar Messages

  • How to create and save playlist using JMF?

    Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
    also how can i play .DAT files using JMF?
    Does JMF supports AVI,Asf files?

    Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
    also how can i play .DAT files using JMF?
    Does JMF supports AVI,Asf files?

  • How to create and save a file in flex web application ?

    Hi,
          I want to create and save a file form flex web application. Is it possible ?
    I have done some googling and found that its only possible through file referece, which needs some serverside implementation be called.
    Is it not possible with file reference to create and save file directly ?
    Can any one suggest how to over come this.
    Thanks in advance.

    Alex,
    code written with the Flex Builder 3 libraries will certainly run in Flash Player 10. However, what you need is not so much the capabilities of FP10 but the library functionalities of the Flex 4 package. And I think that Flex 4 code will only run in FP10 and not 9 (but haven't tested this as at work we have not yet been permitted to upgrade, so there is not a lot of point going for Flex 4!).
    Richard

  • How to create and save a new control?

    Becaus I need it often, I arranged a couple of buttons to create a new control.
    I saved it as a .ctl file, but when I want to use it LabView says it isn´t a control.
    Whats wrong? I couldn´t find a proper hint.
    ALEX
    Attachments:
    control.ctl ‏15 KB

    The problem that you file *.ctl can include only one control, so you have 2 options:
    1) Create ctl file for each control
    2) Put all controls to cluster and save as ctl file.
    When you will insert this cluster to your vi, get out one of buttons and remove cluster.

  • How to create the web based report without enterprise portal?

    Hi experts,
    We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
    Can I use report designer for this?
    Thanks in advance.
    Sharat.

    Hi Sharat
    In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
    1. Enterprise portal
    2.Web Application Designer(WAD)
    So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
    Reagrds
    Satish

  • How to create and save a photo thumb

    I feel a little stupid as I think I ought to know the answer - but nowmI must admit that I need some help.  On the desktop the user select a folder with photos - for examples .jpg. The application then build a xml file successfully but I cannot succeed in creating thumb versions of the photos. Width and height must be max. 96 pixels each but how do I actually copy, resize and then save the thumbs?  The resize portion of my function is the most critical part as I am stuck in my own code.  I am looking forward to some good inspiration.  Thanks a lot in advance Per

    I have solved it myself and will post the solution here soon.

  • How to create and assign role

    Dear all,
    I want to create the role and assign.
    kindly let me know
    shailesh

    Please have a look at below link. It explains how to create and assign content ( roles, iveiws) in Portal
    http://help.sap.com/bp_epv170/EP_US/BBLibrary/documentation/N04_BB_InstallGuide_EN_US.doc
    Kindly assign points if helpful
    Regards
    Jayesh

  • How do a create and save a contact sheet in Elements12?

    I saw how to create and print a contact sheet, but I want to save it and then email it.  I don't see how to do that.
    Thank you

    Jellis96 wrote:
    I saw how to create and print a contact sheet, but I want to save it and then email it.  I don't see how to do that.
    Thank you
    Since you know how to create and print then saving it should be pretty easy.  However, before I tell you how to do this, let me ask you have you got Adobe Acrobat (full version) or some other pdf creator?  There are many free pdf creator out there but you might already have something on your system.
    Assuming you have a pdf creator then instead of printing to a printer, try "printing to a pdf file" and this should allow you to save the file which can then be emailed to your friends and colleagues.
    Hope this helps.

  • How do you create and save icc profiles using photoshop?

    How do you create and save icc profiles using photoshop?

    You don't. Color profiles require specific measurement hardware and software.
    Mylenium

  • How does APEX create and save new files. What extension does it save in?

    Hi can someone help me with this question?
    How does APEX create and save new files. What extension does it save in?
    Cheers!
    VJ

    It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
    Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

  • How to change and save a new file in Edge web Lumira server for Team ?

    Hi Lumira folks,
    I've installed SAP Lumira 1.0, Edge edition and View a sample 'Dairy Wholesaler-Sample"
    I'd like to change it and save as new file, but "Save" button is disabled and when I put my mouse over the button,
    it says "Save Option is disabled in this version".
    Is there any idae how to change and save as a new file in Lumira Edge ?
    Many Thanks.
    JH

    I've just found the reason as below.
    http://scn.sap.com/community/lumira/blog/2015/03/20/lumira-server-for-teams-edge-edition-version-compatibility
    The current version of Lumira
    server for teams is 1.0. This version uses Lumira 1.22 as its 'engine' as this
    was the version of Lumira Desktop that was shipped at the same time.
    Hence with the current Lumira
    version compatibility; namely that a newer version of the product can open an
    older document, but an older version cannot open a newer document, care must be
    taken when deploying Lumira server for teams.
    Lumira server for teams is only
    compatible with Lumira desktop 1.22. If you intend to deploy Lumira server for
    teams, ensure your desktop users do not move to a later version of the desktop.
    Content created in a later version of Lumira desktop can be uploaded and shared
    via Lumira server for teams, but it cannot be viewed or edited online in the
    browser.
    Ensure desktop users disable the
    auto update capabilities in the desktop preferences, and set the update to
    none.

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

  • How to create and allocate authorization profiles?

    How to create and allocate authorization profiles? please issue step by step and usage of  TC:PFCG.

    Hi Srinivas,
    I would like to try to explain how to create an authorization profile.
    1. you have to create a user with the Tcode SU01 at first
    2. run Tcode /nPFCG.
    3. enter a name for the role (naming convention is here very important) which you want to create and then click on "create Role".
    4. enter a short description for the role and then click on Authorization tab.
    5. now you are required to save the role. Click on it and continue.
    6. click on the tab "change authorization data" and select the authorization template what you need.
    7.change the authorization field value.
    8.click on button "Generate".
    9.click on button Back
    10. click on Tab user to assign the role to the user which you created in step one
    11.click on button User comparison and then complete comparison
    Hope this helps

  • How to render and save a file as windows media file or mp3?

    I have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.

    Search for exporting in the help file
    Not all for PProCC, but The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
    PS - rendering is the process of creating temporary files to aid in timeline playback, while exporting creates new files

  • How to create and install a toolbar to a browser using java

    Hi all,
    Can any one guide me about how to create and install toolbar to a browser using java ??
    please any one help me about this,i am not getting any idea about this..
    Thanks and Regards
    Sandesh S

    I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

Maybe you are looking for

  • Getting Error while Creating Context at RunTime

    Hi All, I am creating the Value Node and Value Attribute at Runtime, but i am getting Error of nullpointerException..... Following is the code Snipet: public void wdDoInit()     //@@begin wdDoInit()     IWDNodeInfo rootnodeInfo = wdContext.getNodeInf

  • Shift is not opening file on EHD and I don't have privileges : (

    It is embarressing how much trouble I am having with iTunes. I have put my library on an EHD (correctly through consolidating), and I understand I should start iTunes while pressing shift. But this is not properly directing iTunes open the music fold

  • Profit centre line item report after transfer

    Dear All, I have activated Document splitting. And it is working fine. But when i take the report at profit centre level i am not able to see the Balance sheet line items. Then i transferred the Balance sheet items to profit centre through customizin

  • All my incoming messages are being marked as junk

    If I send a message to myself the filter marks mail as junk despite the advanced settings saying 'don't mark as junk people in my address book'. I reset the junk mail filter by accident. Anyone have any ideas. It was working OK up to that point

  • Integration of CUP 5.3 with SPM

    Hi, We have configured the Integration of CUP with SPM and we have raised a request for requesting Superuser Access. The same request has been approved by the manager. Request status is changed to complete and it is saying like requested access has b