How to create and test HTTP connection for proxy

HI
Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
How i will get sure that connection is working properly?
Thanks
Debraj

Hi Debraj,
You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi

Similar Messages

How to Create and Test a Zone of Type F1-APP-URL

Hi,
I would like to how to create and test a Zone of Type F1-APP-URL?
What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

BOXIR2, How to Build and Test OLTP Connection

Hi Everybody,
In BOXIR2. I have added OLTP LIC Keys. I am not sure about how to test the OLTP connection is working or not.
Please provide steps for below Items:-
1.     Steps to configure the connection for OLTP
2.     How to test the OLTP is working or not?
I would be grateful for for you help
Thanks,
Srinivas

Hi Debraj,
   You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi

How to create and configure a user for MaxDB monitoring

Good Morning,
Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
Can you help me on this matter please?
Thanks.
Best Regards,
Pedro Gaspar
Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM

Hello Pedro,
Check the following website for further information:
http://maxdb.sap.com/doc/7_8/default.htm
Regards,
Eduardo Rezende

How to create RFC(TCP/IP Connections) For BW Maintain BI accelerator Index?

HI Friend,
    I want to test Maintain BI accelerator Index for CUBE ( RSDDV ), but I don't create RFC(TCP/IP Connections), what Program name enter in Program?
    Because RSCUSTA tocde need to enter : RFC BI Accelerator .
ERROR:
SP test: Error in BI Accelerator (module TREX_EXT_GET_TREX_VERSION_INFO)
   BW SERVER:
Operating system     Windows NT
Machine type         2x AMD64 L
Server name          SAPBW1_BW1_01
Platform ID          562
Database system      MSSQL
Release              9.00.13
Name                 BW1
Host                 SAPBW1
Owner                bw1
    Thank you.
Regards,
Howard.
Edited by: flying on Apr 30, 2010 7:39 AM

Hi Howard,
is this your first usage of BWA? Normally this config is done by the initial installation normally from your HW vendor.
Please use the python standalone tool trexadmin to setup this RFC connection:
1. Log on with the user <sapsid>adm.
2. Enter the following:
cd <TREX_DIR>
./TREXAdmin.sh
Go to the tab 'Connectivity' and create a new RFC connection.
Regards,
Jens

How to create and deploy portal applications for WebLogic TP10

Hi Friends:-) Thej here,
I want to know, how to create weblogic portal applications for tech preview version 10.
Thanks

The Tech Preview of 10.0 contains only WebLogic Server. WebLogic Portal 10.0 functionality is not contained in this preview. Therefore, you cannot create portal applications in this Tech Preview.
Thank you.

How to Create and apply adjustment preset for printing

How can I create an adjustment preset that I can apply to images before I print? In Photoshop CS3, it's easy: I just create an action. But how do I apply a preset that simply shifts existing settings a relative amount instead of applying absolute settings that overwrite image-specific settings?
The problem is that my Epson R1800 and its profiles output images that have a yellow shift to them. What I want to be able to do is apply a +5 shift to the shadow tint (camera calibration) and a +10 shift to the WB tint on top of whatever settings I already have after development.
Any ideas?
(and yes, I do use colour management, my monitor is calibrated, and I instruct LR2 to manage colour and use the profile specific to my printer, paper, and print quality setting)

No ideas here? Surely someone must have wanted to apply an adjustment to compensate for a printer's tendencies or the different dmax, shadow detail, and colour temperature of various papers and illuminant sources (incandescent vs daylight fluorescent, sunlight), or at least use different tone / contrast settings or different amounts of sharpening (before the new print sharpening facility appeared in LR2).

How to create and register custom views for Bulk Export

In the FAQ of "Understanding Bulk Export" chapter, it says "You can define your own view object for export. However, before you can use your view object for export, you must register
and enable it as an export object in the Setup and Maintenance, Manage Export Objects task."
Task "Manage Export Objects" does not have a create or edit option. Do I have to use a particular rol to activate this options?

As you state this is likely related to the permissions you have. Have you confirmed that you have the necessary roles mentioned in the documentation ? I think you would need at least "Application Implementation Consultant" and potentially others from the list also depending on the objects accessed.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How to create and edit time curves for parameteric EQ

Hi all, I'd like to do something very basic, but I can't figure out how to do it.
I've got a video, and I'd like to apply some filters to an audio track, and sync it with the video. I've managed to load in the video, put my audio files on the multisession, and place the effects I want in place. I can't figure out the rest - i.e. animating the parameters. I'm used to animation software (such as aftereffects), where I can enable keyframing for a channel, goto a time on the timeline, change the value for a parameter and it's saved as a keyframe at that time.
I do have a bunch of midi controllers, but I'd rather hand edit these keyframes for accuracy as opposed to trying to record, there's only a few moments so should take me just a few seconds if I knew how to do it!
Cheers,

Ah indeed, there is the familiar keyframe interface. That's great thanks, however I still couldn't find how to control these from the effect interface! I.e. I can edit the curves from there, but there's about 20+ parameters on the parameteric EQ, to have to go through keyframing it through the curves and not the interface would be nuts. I'd like to set all of the parametric EQ parameters (freq, Q, gain for each band) to be keyframable (which I can go through and do once if need be by manually setting a keyframe at time==0), but then I'd like to just use the parametric EQ interface, move the points around, and have the keyframes created. Currently what it seems what I have to do is:
- go through all 20 parameters and manually place a keyframe at time==0
- go to a new time on the timeline, and move all my points around in the parametric EQ interface
- go back to automation curves and go through all 20 parameters one by one clicking on the 'add keyframe' button for each parameter individually.
- go to the next time on the timeline, and repeat
Suffice to say this is tedious enough, but it gets even more interesting when:
The parametric eq interface does not update to show what the actual current value (From the automation) graph is. So if I want to slightly tweak a value (e.g. lift or drop a tiny bit), I can't do it, I can't see in the parametric eq window what the current value is. So I need to:
- goto the automation curve and find the parameter in question
- read out the value
- go back to the parametric window, and set that number in first
- and then edit it.
And then it gets even more interesting (this is probably a bug), because I'm having trouble editing current keyframes. I've found if I move a value on the parametric EQ window if there already is a keyframe in place I'd hoped it would just update the keyframe, but instead it does nothing. What I need to do is:
- first remove the keyframe
- then move the parameter in the parameq window
- then set the keyframe again.
If I move the parameter first, then remove the keyframe, then set the keyframe again, it won't get the new value. The parameter must be moved after the keyframe is removed. nuts.
I hope I'm just doing it wrong and there is an easy 'auto-set keyframes' option somewhere!
I'm running audition CC v6.0 build 732 64bit on windows 8.1 pro.

How to create a vi that counts for example 3 - 10 pulses in and then give a 1 puls out

how to create a vi that counts for example 3 - 10 pulses in and then give a 1 puls out.
I'm working with Labview 6.1
Running with Labview 6.1
Fieldpoint hardware

Hi,
You should be more specific, what kind of hardware you are using ???
Which kind of pulse you are measuring ?? You are saying that you want to count a number of pulses and then when you get to a limit (which will be between 3 and 10) you want to output a pulse ?
Andre Oliveira

How to get and maintain Http persistent connection to get pushed data from

At MangoSpring ,www.mangospring.com we are working on application which uses IMPS protocol where we always required to receive data pushed by server.
To achive this we'll have to maintain one persistent Http connection on client side, so that we can be notified whenever some data is pushed by server.
Reply With Quote

our problem is :: " How to get and maintain Http persistent connection to get pushed data from Server "

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

HT3630 How to creat an app-enabled accessories for iPhone? Please help me to get an answer..

How to creat an app-enabled accessories for iPhone? Please help me to get an answer..

To get hardware interfaces and API's via hardware you
need to join the MFi program. That info is here:
https://developer.apple.com/programs/mfi/
To get the additional software to be able to download
and test code on any iDevice, you must join the
iOS Developer Program. That info is here:
https://developer.apple.com/programs/ios/
Both programs require fees and NDA agreements,
especially hardware as most vendors that supply
components development tools will not sell you any
of their tools unless you are a member of the MFi
program.

How to create a DSN Less Connection using MySQL

Hi All
How to create a DSN Less Connection using MySQL?
http://www.caucho.com/projects/jdbc-mysql/index.xtp and downloaded Caucho driver and installed the jar ---- caucho-jdbc-mysql-0.2.7.jar in my classpath..
this is how i embedded the code
try
driver = (Driver) Class.forName("com.caucho-jdbc-mysql-0.2.7.Driver").newInstance();
catch (Exception e)
lastErr = "Cannot load the driver, reason:"+e.toString();
nothing seems to work with code..
Unable to proceed..Any piece of code would be of great help..
Thanks and regds
Gautam

According to the installation instructions for that driver:
The driver is com.caucho.jdbc.mysql.Driver
The url is jdbc:mysql-caucho://hostname:port/database
You used something else for the driver name. So it doesn't work. By the way, I found those instructions here: http://www.caucho.com/projects/jdbc-mysql/

How to create and test HTTP connection for proxy

Similar Messages

Maybe you are looking for