How to create animated flare effect on photo in Adobe Premiere 11?

Hello Community Folks,
I'm pretty new to using Adobe Premiere 11, so please bear with me on this question. I'm creating a music video, for fun, using mostly photos for the visuals. I want to apply a lens flare effect on one of the photos in my timeline, and "animate" it so that the flare happens at a certan point in the timeline and then disappears. Can you tell me how to do that. Step by step instruction would be best for me, if you are OK doing that for me. Thanks!

You can Cut your Clip, say twice - where you want the Lens Flare to Appear, and where you want it to disappear - giving you three segments of the Clip. The first would be with no Lens Flare Effect, the second with it, and then the third without it.
One can then Keyframe the Lens Flare, if they need to.
Good luck,
Hunt

Similar Messages

How to create a blur effect with CS6 ?

Hello , On the CS5.5 version of the blur effect was proposed . In CS6 it no longer exists.
How to create a blur effect input or output on a video with CS6 ?
Thank you

Hi !
Thank you ! it's perfect !
Bye

I accidentally deleted my photos; how do I download my files and photos from Adobe Online Storage?

I accidentally deleted my photos; how do I download my files and photos from Adobe Online Storage?

So i think backup online the the most effective way to protect data loss!
If you found you have lost your important files, you can just download it from the online server.
And if you delete your files from hard disk and cannot download it from online storage, there is still another way-data recovery software to recover your lost files.

How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

Hi there,
I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
Any established hardware/convertor to recommend ?
Thanks

Ryan,
For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
Good luck,
Hunt

How do I pay for my trial version of adobe premiere 6

how do I pay for my trial version of adobe premiere 6

Trial versions are free, well, for 30 days at least and then they stop to work. That's the whole point. Not sure what you are asking beyond that. If you want the product, purchase it from Adobe or whatever reseller you deem suitable.
Mylenium

Adobe Premier Pro CC - How to create animation bar & text shown 0:31 sec into attached link .. PLEASE HELP!

Hello,
I'm new to Premier Pro CC but I have managed to figured out the basics.
The only thing I need to know now is how to create or if it is possible to create the bar that appears 0:31 seconds
into the video, from the bottom of the screen with the text that fades in & out.
Please see attached link for reference, note the bar is shown 0:31 seconds into the video.
If anyone can help I would REALLY appreciate it
Thank you!
EMOTIONS ARE HIGH | HANNAH MAGGS - YouTube

Can be done either way ( and others as well)
From Photo Shop one would produce the Layer so one could have individual Control of the components. eg Opacity of the black rectangle and fades on the text.
Same could be done with multiple titles created in PPPRO.
Similar layers technique in After Effects composition then brought back into PPRO
AEFX would be the most powerful for any composting and animation sophistication and control.

How to create this scale effect/3D?

I want to create an effect similar to what can be seen in the following video where the subject slowly scales up creating a 3D effect:
https://www.youtube.com/watch?v=4nH45OSmzY8
I'm guessing that the subject is just masked out of the photo in Photoshop and placed on a new layer, brought into Premiere and the subject layer is just scaled up? Is there anything else?
Any other tips for doing this?
Thanks.

How to parallax animate your photos
http://www.imaging-resource.com/news/2013/11/15/how-to-parallax-animate-your-photos-video
After Effects Tutorial - Parallax FX in After Effects
http://vimeo.com/61613629
Walking Dead Intro Parallax Tutorial
http://www.vidmuze.com/walking-dead-parallax-tutorial/
parallax after effects
https://www.google.com/#q=parallax+after+effects

How can I get more effects for photo booth?

I just bought my new MacBook Pro and I thought photo booth would come with more effects. How do I get more effects, not backgrounds?

http://b-l-a-c-k-o-p.com/CatEye.html

How to create the droste effect in photoshop cc 2014?

In the past you could use pixel bender to create the droste effect, that is what I have found out from the internet.
But how to create that effect today seams non existent on the net!
Can any one help?
KR,
AJ

Right. Pixel Bender is gone. It was an experimental filter available from Adobe Labs but never made it into an actual product release. As of CS6, Oil Paint filter was introduced. It's not the same thing but more like a shaved down version of Pixel Bender.
Look at Filter Forge. They offer a 30-day trial. Disclaimer: I've never used it myself.
Droste Spiral (Effect)
Filter Forge - Download Free Photoshop Plugins!
Nancy O.

How to create a globe effect that text moving around?

Hi everyone, I'm doing a project for my school and I found a effect that looks kinda cool on you tube but I don't know how to create it. This is the link to that video clip:
http://www.youtube.com/watch?v=FUgM105uN4c&feature=related
You can see that effect about 20 seconds of the clip.
Please help...thanks.

There's a
tutorial on Creative COW about this, and an
example project on the After Effects Exchange.
I found these by doing this
After Effects Community Help search for 'globe'.

How to create a Lamella effect in PSE7 ?

I'd like to create as a special effect a light and shadow lamella effect (as it can be seen when the light is coming through partially closed lamella curtains). Does someone knows how to create this effect with PSE7?
Thanks for your help.
Roland

I worked on this challenge a bit and came up with the following:
Open picture file
Duplicate background layer, work on background copy layer, shut off visibility of background layer by clicking on its eye icon. I do this so that if you want to start over again, you can just delete the newly generated layers.
Create a new, blank layer at the top of the stack, fill this with 50% gray (Edit>fill layer>50% gray), Mode:overlay
Go to Filter>sketch>Halftone pattern. Adjust size & contrast. Pattern type:line
Soften this a bit with Filter>noise>median - set radius to suit
Still working on layer at top of stack with 50% gray, apply eraser tool to remove unwanted striping.
Go to Image>transform>skew to achieve desired curvature of stripes
Reduce opacity of this layer to suit.
An alternative may be to take a picture of a venetian blind with light behind it, define this as a pattern (Edit>define pattern), then apply this pattern in a layer. I can't try this since we don't have venetian blinds.
HTH

How to create a text effect like this (see example)

Hello everybody,
i would like to create a text, pretty similiar to this shirt: http://www.kuhvet.com/wp-content/uploads/2012/06/OKC-Conference-Champs-LR-T-shirt.jpg
So, the stext hould appear in 3D (kind of) and also should have a golden and silver outline. Also the shadow should drop in front of the text.
I hope that's possible and not that hard to create? I'm a beginner to Illustrator (CS4).
Thanks a lot for your help
Warm regards from Germany
Florian

I would not waste time using AI 3D tools to accomplish this effect. It is 1 point perspective. Start with your front text, establish a horizon line and vanishing point, scale and duplicate the text using the vanishing point as your center of scaling, then connect the points to create the "extruded effect" between the to sets of text. You can outline the text to accomplish this.
For the reflected text, as John suggested, duplicate your text and distort it. Read about "Envelope Distortion" meshes. These will keep your distorted text fully editable, if that is a concern.
Have fun learning Illustrator.

How to create shiny/mirror effect with a background.

HI there we have been trying to create a shiny effect and
found the following tutorial.
http://www.fireworkszone.com/redirectionNbClicks.php?root=2&idLogiciel=4&idTutorial=371
The only problem we have is that we have a textured
background and the tutorial talks about having a colored background
with not texture.
When we create the shiny effect you can see the white or
black that fades.
Any suggestions?.

To create a user defined member, in the Hierarchy editor on the bottom right of the screen there is an add buton, if you click on it, you will get a list. Included in the list are user defined child and user defined sibling. These create user defined members. Don't worry that the binding says unspecified. When you save the hierarchy, it will change it will change to be a text value equal to the name you gave the member. To get the members you want to put under that member, I find it easiest to create a Dimension element that has filtering to get select the I need for example if I create a user defined member called diet drinks. I'll create a Dimension member called diet skus that has a filter to select skus where the alias contains the word diet. I'll put that member under my diet drinks member. Whil it might be a little late for you. The Essbase Studio book I'm working on will be available late this week. It has examples of what you are asking about.

How to create a ripple effect on grid

Hello,
I'm trying to distort a standard 20x20 line grid to make it look as if it has a ripple running through it. I've tried putting the grid into photoshop and using various filters but they don't seem to work. Also the liquify tool in photoshop just created messy results. I want it to have a basic 3 dimensional look. Is there a simple way to do this?
Thanks for your help,
Ben

Monika,
I'm trying to recreate the 3D effect of an object being dropped into water. However instead of using a solid vector, I'm trying to recreate the effect within a grid of lines. Maybe the image I uploaded above would help explain it better?
The lines in the grid need to bend and distort so that it looks as if the ripple is going through the grid.
The only thing I've done so far is create a 3d model of a ripple and use the wire frame view but when looking at it from above the lines don't create the ripple effect as you can see in the below image:
Does this make more sense now?

How to create this fade effect

I'm trying to create this fade effect in Dreamweaver 2004 and
would appreciate any assistance.
http://smallbusiness.smh.com.au/
It's the blue and light orange fade half-box surrounding the
"Management or Sales & Marketing or Show me information on:"
sections in the middle of the page.
Regards,
James.

Hi
can be done in Fireworks, photoshop or xara.
Simply load up the software and create a simple rectangle.
Select you fill
bucket and search for an option "gradient fill". Select the
linear option
and have a play with colours. I would suggest it's a blue to
transparent
gradient. Then you create a text layer and export the result
as a gif (as
it's a simple graphic).
Take the exported graphic and place on your page using your
chosen method.
If you need a walk through I'd suggest going to the Fireworks
forum where
you'll get all the help you want or
http://www.peachpit.com/articles/article.aspx?p=30942&seqNum=3
for
fireeworks
http://graphicssoft.about.com/od/photoshop/l/bllps507b.htm
- photoshop
HTH
Ian
[email protected]
http://www.edwards-micros.co.uk

How to create animated flare effect on photo in Adobe Premiere 11?

Similar Messages

Maybe you are looking for