How to create array with "n" elements...
Hy, how can i create a array with "n" elements ?
i know, but the thing is: the other methode (which
one isn't developed fom me) needs an Object Array
(Object []) to work correctly...then take a look into the method toArray() of the Collection interface.
thats why i need this gay "object Array"....I think it would be wise to avoid that adjective in this context and meaning.
Similar Messages
-
Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuangIf you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand -
Sort array with equal elements
Hi, I'm a new one.
I have a problem to sort 2d array with equal elements (it has 5000000 of elements from 1-255) for example:
1 2 1 1 3 4 5 5 6 1 2 3 (value from 1-255)
2 2 1 1 3 3 3 3 4 4 4 1 (value from 1-255)
And I need make array or matrix 255 rows vs 255 colomns, and count how many equal elements for example:
1 2 3 4 5 6
1 0 1 0 1 0 0
2 0 1 0 1 0 0
3 1 0 1 0 0 0
4 0 0 1 0 0 0
5 0 0 2 0 0 0
6 0 0 0 1 0 0
I'll be happy if someone could help meI understand that it's very complicated explain.
I build 2d array from two 1darray each of them has values 1-255. So right now i must constract array or matrix 255x255 where must calculat how many times value from (1-255) for one array in another array and write this sum for each value 1-255. I try to show it
1 2 so I need array 3x3; for first row for value 1 I have two times value 3 and one time value 2
2 2 2 I have two times value 1 and one time value 2 and one time value 3
3 2 3 I have two times value 2 and one time value 3
3 2 so my result matrix will be 1 2 3
3 3 1 0 1 2
2 3 2 2 1 1
2 1 3 0 2 3
2 1
1 3
1 3
Maybe its more clear -
How to create table with row type in smart forms
How to create table with row type in smart forms with out line type
please explain me the procedureHI,
A table type describes the structure and functional attributes of an internal table in ABAP. In ABAP programs you can reference a table type TTYP defined in the ABAP Dictionary with the command DATA <inttab> TYPE TTYP. An internal table <inttab> is created in the program with the attributes defined for TTYP in the ABAP Dictionary.
A table type is defined by:
its line type, that defines the structure and data type attributes of a line of the internal table
the options for managing and accessing the data ( access mode) in the internal table
the key ( key definition and key category) of the internal table
The row type is defined by directly entering the data type, length and number of decimal places or by referencing a data element, structured type ( structure, table or view) or other table type. Or the row type can be a reference type.
<b>for more info :</b> http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
Internal table
Regards
Sudheer -
How to create complaints with reference to ECC Billing document (CRM 7.0)
Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PMnot resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM -
How to create Rules with Flex Field mapping in the bpm worklist
I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create PDF with Form Builder (T-Code:SPF) and how to use it?
How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PMPDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit -
How to create folder with sub folder ?
How to create folder with sub folder ?
Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David -
How to create Vector with reference to Collection
hello experts,
can someone let me know how to create vector with reference to Collection interface.
Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
Vector v = new Vector (Collection c);
what are the possible objects of 'c'
post some example code please.
thanksEver heard of reading the javadocs?
"Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
// I certainly can create a Collection - here's one
Collection c = new ArrayList();
// Now I'll add some Strings to my Collection.
c.add("foo");
c.add("bar");
c.add("baz");
// Now I'll make a Vector out of it.
Vector v = new Vector(c);% -
How to create parameter with multiple selection in a query (SQ02) ?
Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter? -
How to create database with ASM
HI
How to create database with ASM?
I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
I install oracle DB software only. Also make 3 disk for ASM .
1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
How I can see disks ..
so I simple install oracle DB software only.
2 -- Now I want to create database with ASM by DBCA .
What process I will follow ?
Please guide me
ThanksHi
Steps to create database with ASM.
1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
2.Create disk without file ssytem.
3.Assign disk to raw .
4.Change owner and permission to raw devices.
5.Configure ASM manually or USing DBCA.
Manually ASM Configuration.
a.Create initialization parameter file and password file.
b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
Using DBCA to configure ASM.
1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
ASM disk also can be conbfigured with ASMLIB .
If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
Hope this will help U,
Tinku -
How to create CATALOG with MS SQL Server?
Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification. -
How to create slide shows in Elements 11?
Can't find how to create a slide show in Elements 11. Is it possible?
See here:
How to Create Slideshows in Photoshop Elements 11 - For Dummies
and
Learn how to use Photoshop Elements 11 - Part 22 - How to Create a Slideshow in Photoshop - YouTube -
How to Create IView with the HTML Content
Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.
Maybe you are looking for
-
I am unable to receive e-mail from my brother, even when he is replying to my e-mail. All other e-mail is getting through and I have checked my junk/spam/rules and nothing seems unusual. What might be the problem?
-
Error: Could not resolve s:SolidColor to a component implementation
So I have a library project and in that project I have a CustomDataGridBackgroundSkin file which is as follows: <?xml version="1.0" encoding="utf-8"?> <s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/
-
ORA-35563: Multiple values exist for an attribute of this dimension member
After following the tutorial Building OLAP Cubes I was trying to make a cube with aggregation down to the day instead of down to the month. I created a times table pretty similar to the one used in the tutorial: CREATE TABLE EVENT_TIMES ( HOU
-
We are experiencing long delays, (several hours) when trying to save or open the InDesign file in both InCopy and InDesign. We are working in InDesign CS4 and InCopy CS4 and have installed all of the latest updates. I am concerned that I am doing som
-
hiya i would like to know how to make a song a ringtone on my nokia lumia i only got it today and cant work out how to do it like other nokias. thanks Solved! Go to Solution.