How to create & Assign unique Qualification level and Groups(Each trans.)

Hi,
While working on CRM_LEAD i have observed that i cannot create unique Qualification level or Groups/origins for each transactions, if i add one more Qualification level or Groups/origins in existing table it is reflecting in all corroseponding Leads.
Please tell me how to create seperate Qualification level and Groups/origins for each Transaction, else we can use Authorisation Object for this.
Please resolve.
Regurds,
Dipesh.

Hi Chirag,
I've read the following link, but the question is....
- Where is the link to create transport groups? That is my only question It's as easy as that
Found it...sorry I knew it was easy
Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM

Similar Messages

How to create second or third level of menu bar in se41 ?

Hi All
How to create second or third level of menu bar in se41 ?
I created it once but forgotten , do anybody remember ?
Regards
Jaman
Message was edited by:
ABAP Techie

Hi..,
Once you have created a menu bar, you enter the individual menu entries. Each menu can contain up to 15 entries.
A menu can contain any of the following:
Function names (with function code and text)
Submenus (pull-down menus)
Separators
You may include submenus up to three levels deep.
Menu functions that logically belong together are grouped together using separators. This makes the menu easier to use. Separators also make long menus easier to read by dividing them into smaller parts.
Defining Menu Functions
To add functions to a menu that is already open in the Menu Painter:
Open a menu list in the menu bar by double-clicking the menu title.
The system opens the menu. The menu entries list contains the two columns Code and Text.
In the Code column, enter a function code (this may be up to 20 characters long).
If you want to enter a function code that is longer than the input field, you must first change the displayed length of the field in the user settings. (Choose Utilities ® Settings ® User-specific.)
Enter the function text in the Text column.
The name you enter here appears in the menu at runtime. You can also determine the contents of function texts at runtime (see Defining Dynamic Function Texts).
Repeat steps 2 and 3 for each item in the menu.
Creating Cascading Menus
To add a cascading menu (sub-menu) to a menu:
Leave the Code column blank.
Enter a menu name in the Text column.
Double-click the cascading menu to open it.
The system opens the menu entry list for the cascading menu.
Complete the menu as you would any other.
Inserting Separators
Place the cursor on a line.
Choose Edit ® Insert ® Separator.
If you want to insert a separator between two existing menu entries, place the cursor on the line before which you want to insert the separator.
Editing Menu Entries
You can cut, copy, paste, and delete menu entries.
Place the cursor on a line.
Choose Edit ® Entry ® Cut (or Copy, or Paste, or Delete).
If you double-click a function code, the Function Attributes dialog box appears. Here you can, for example, change the icon assigned to a function.
regards,
sai ramesh

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

How to create a gui pf status and guititle in module pool programming?

hi frnds,
how to create a gui pf status and gui title in module pool programming?
my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
plz gve step by step process.

Hi,
For Title:In PBO...just write
SET TITLEBAR 'ZTITLE'.
double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
PF means FUNCTION CODE
ex; set pf-status 'zrstatus'.
double click on the zrstatus expand the application server ,
at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
will appear on the screen.
Details:
PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
Implementing the status for a screen can be done in 2 ways:
1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
Status names can have a maximum of 20 characters.
After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
In transaction SE41,
1) Give the program name and the status name and click on the Create button.
2) Go to 'Function keys' and expand.
3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
Whatever you have typed now becomes the function codes of these icons and can be used in your program.
For example you have a screen 100.
In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
The flow logic for the screen looks like this:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
The code for these modules can be something like this:
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Example'. "Example is the name of the GUI status
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SAVE'.
"call a subroutine to save the data or give statements to save data.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
Regards,
Shiva Kumar (Reward If helpful)

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

RV120W- How to create new unique self-signed certificate?

Hello,
how to create new unique self-signed certificate on RV120W? I can create request for singning by external CA, but I cannot create new unique self-signed certificate itself. Any idea? Did I miss something? Many thanks!
Abudef

So basically RV120W does not support self-signed certificate? It only allows to generate private key and certificate signin request. There is no chance to replace default generic ssl/vpn certifice within router itself? Could you please give me an advice, how to sign that request by some "CA"? I mean no commercial CA, I need something free running under Windows os. Many thanks!

How to create keyfigure in Reporting level.

Hi Experts.
My question is How to create keyfigure in Reporting level {not
calculated keyfigure, Restricted
keyfigure and also Newselection,New formula}
thanks&regards
pradeep k pavan

You can use formula variable to populate numbers. Again you can use virtual key figures if you want to populate values on fly. But what exactly is the requirement?

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to Create a Page LOV Template and a Region LOV Report Template in APEX

Hi All,
Thanks in advance ..
I am new to APEX , Currently working in APEX 3.2
Can any one please guide me How to Create a Page LOV Template and a Region LOV Report Template in APEX
So that I can create dynamic Multi column LOV in APEX
Cheers
Sachin

Sachin,
I think you are en-quiring about 'Custom pop-up page'. See this link. You will get all required info there.
Regards,
Hari

How to do budgeting at activity level and WBS element level in project syst

Dear GURU's,
Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process.
I need how to do this configuration to map this scenario.
Regards,
Bhanu

Hi Bhanu,
Use this link :
http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
after page opens , click on BUDGET MANAGEMENT , There you will find each and every step you want .
Thanks ,
Dhruv Kumar Malhotra

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

How to create a barcode in scripts and smartforms

hi
how to create a barcode in scripts and smartforms

Hi,
For Script:
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
For SmartForm:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Regards,
Bhaskar

How to create the servlet as acontroller and how to use it

how to create the servlet as acontroller and how to use it

>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

How to create & Assign unique Qualification level and Groups(Each trans.)

Similar Messages

Maybe you are looking for