How to create/automate a picklist in I/O Field of a screenPainter?

Hi All,
I have a screen: I/O box field and table control that will allow users to accept input.
Please see the screen-shot below.
http://img197.imageshack.us/img197/6526/ioboxnopicklist.jpg
Declared in my top include as:
DATA: P_WERKS LIKE T001W-WERKS. "Plant Master Table
But during execution, I cannot see any picklist for the plant?  How can I automate it in the case of I/O field?
I cannot declare PARAMATERS in my TOP include since my program is moduled.
Thanks.
Regards, Jaime

Hi,
Assign this H_T001W_C search help in the attributes of the field in the screen painter.
Hope this helps you,
Regards,
Abhijit G. Borkar

Similar Messages

  • How to create automatic creation of BP from customer and vendor master data

    Hi gurus,
    can any one tell how to create automatic creation of BP from customer and vendor master data.
    Please give me the steps.
    Thanks
    Sasikanth.

    HI,
    Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
    Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
    rgds,
    Srini

  • How to create Automatic TO at MIGO

    Hi Guys
    How to create automatic Transfer order(WM)
    I need this after creation of MIGO
    Where I can see the TO number(Not TR)
    What are all the config setttings for this( Triggering Auto TO)

    Hi
    Use OMKX
    Or browse through
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Inventory Management>Activate Automatic TO Creation
    Regards
    Amuthan M
    Edited by: Amuthan M on Apr 22, 2009 3:12 PM

  • How to create automatic serial number for ticket in illustrator?

    How to create automatic serial number for ticket in illustrator?

    Check this out
    http://forums.adobe.com/message/1271310#1271310

  • How to creat a Data provider  based on different fields in SAP BW ?

    Hi,
    Experts,
    There are  20 fields  of  Plant Maintainace  like : 
    SWERK
    BEBER
    STORT
    TPLNR
    EQUNR
    INGRP
    QMDAT   ---peroid
    STTXT
    QMDAT  - Date of Notification
    QMNUM
    QMTXT
    QMART
    AUSVN
    AUZTV
    AUSBS
    AUZTB
    AUSZT
    ERNAM
    QMDAB
    AUFNR
    I  want to creat a  Report based upon these fields  ?
    For that I h'v  checked the relevant Fields to the   existing standard  Datasource  in Bw side   &
    Checked  cubes   created  based upon these Datasource  in Bw side !
    i h'v found  some fields are  existing different cubes & some are  missing .
    How to creat a Data provider  based on different fields in SAP BW ?
    plz suggest      !!!!!!!
    Thanx,
    Asit
    Edited by: ASIT_SAP on Jul 15, 2011 6:25 AM
    Edited by: ASIT_SAP on Jul 15, 2011 6:27 AM
    Edited by: ASIT_SAP on Jul 15, 2011 12:37 PM

    Hi Lee, Please see below..
    DECLARE @Machine2 TABLE
    DispatchDate DATE
    INSERT INTO @Machine2 VALUES ('2014/02/01'), ('2014/02/02'), ('2014/02/03')
    DECLARE @DateFrom DATE
    SELECT @DateFrom = DATEADD(D,1,MAX(DispatchDate)) FROM @Machine2
    SELECT @DateFrom AS DateFrom
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

  • How to create automatic timer process in BPM?

    Can anyone tell me how to create an automatic timer process in BPM?
    Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event?
    Thank you

    Hi,
    You can make use of Global Automatic activity to kick off your process at a particular time. Place a Global Automatic activity in your process and right click on the Global Automatic activity and select Properties --> General --> Global Automatic Type: Automatic Schedule, Automatic Schedule: <Configure with your requirement>.
    Else you can make use of due transition/timer activity to get your task done.
    Bibhu

  • How to create automatically users&roles in CUA and in chlid systems?

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    You can use one of the various ways Java EE provides you, e.g. container managed authentication.
    It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
    You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
    Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

  • How can create automatic billing?

    hi,
    I want to create automatic billing after creation the goods issue in delivery.
    I want to know how we can do it and is it necessary to use special user exit to program or not?
    Thank you.

    Hi Lida,
    Take the help of BASIS and give them the criteria as to for what billing types you want to do the Auto invoicing and then other criteria ( like docs with PGI or with out PGI n other ) save the criteria as variant and ask the BASIS team to run it at regular or required intervals...
    Also take a look at the below link if you wish to and check if any of the userexits meets your requirements.
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sdUserexits]
    Hope it helps
    Thanks and Regards
    Rohit.

  • How to create automatically pdf with automator

    Hello,
    Probably my problem has been posted many times on this forum. So, any help is more than welcome.
    I would like to create a workflow that creates automatically a pdf version of any file when dropped for example in a defined folder.
    Is it possible? Does someone have already a similar workflow working?
    Thanks in advance
    Regards
    Tom

    Sure, but you would do that if you have to convert one or two files.
    I am looking for a workflow which converts automatically into pdfs hundreds of word documents for example.
    thanks
    tommaso

  • How to create automatically users&roles in CUA and child systems

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    Thank you all. I got the solution.
    Regards
    Rajesh

  • How to create Automatic Delivery and Billing documents immediate

    Hello,
    I want to create Automatic delivery and billing documnets immediate once I create a sales order.
    E.g I need to see in the Status Bar the delivery and billing document was created.
    Thank you in advance
    Your help is highly appreciated
    Alfaid

    Please search in sales forum.  Many times this was discussed there.
    thanks
    G. Lakshmipathi

  • How to create automatic po from migo?

    enter Vendor
       Message no. M7018
    i want to create automatic PO from MIGO and i put the vendor in partner field vendor but this msg is issued

    Hi There
    Pre req for Auto PO
    1. Material master - P View- Auto PO enabled, and Material should be Valuated material and Procurement type should be F.
    2. Plant should be assigned to STD p Organ
    3. Vendor Master enable the Automatic PO
    4. Info Record with the Valid Price
    5. In Purchasing define default values for document type(PO) independent of transaction(MB01)
    6. Inventory Management- Movement Type- 101 and 161 Auto PO should be enabled
    7. Manual Entery @ the time of MIGO- Material , Plant, Location, Vendor and Qty
    You will get the PO, Material Document and Acc Document,,,
    Cheers
    Senthil

  • How to create an infotype with one of its field length eq 1000.??

    hi ,
    i need to create a infotype where one of the field length is 1000 characters how do i achieve this. if i give more than 255 in the PS structure it will not allow. then how do i get a text field of 1000 chars in the screen ( which is an input field)

    You can use those function calls even inside a PA Infotype.. they just invoke the text ediotr table control.. I gave you the reference of the PD infotype 1002 just for an idea. I don't think you will able to meet your 1000 char reqt without using the text editor.
    ~Suresh

  • How to create a duplicate of the Manager ID field in the Create user menu

    Hi,
    I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
    I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
    Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
    Did anybody do that??
    Thanks!

    Hi Kevin,
    First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
    Then I added the following lines to de FormMetaData.xml file:
    </Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
    <ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
    </Attribute>
    <AttributeReference editable="true" optional="true">-750</AttributeReference>
    When I try yo Create a new user, the OIM System Administrator returns a System Error.

  • How to create automatic receipts in ar

    hi,
    we created document sequence and assigned receipt method against it. And changed profile option to partially used. And create the Receipt Classes for automatic. While making the receipt it asking payment instrument. how to solve this error. Pls guide me.
    Regards,
    R.Carolin

    hi,
    Provide exact error message which you are getting.
    --Sri                                                                                                                                                                                               

Maybe you are looking for