How to create automatic receipts in ar

hi,
we created document sequence and assigned receipt method against it. And changed profile option to partially used. And create the Receipt Classes for automatic. While making the receipt it asking payment instrument. how to solve this error. Pls guide me.
Regards,
R.Carolin

hi,
Provide exact error message which you are getting.
--Sri                                                                                                                                                                                               

Similar Messages

  • How to create automatic creation of BP from customer and vendor master data

    Hi gurus,
    can any one tell how to create automatic creation of BP from customer and vendor master data.
    Please give me the steps.
    Thanks
    Sasikanth.

    HI,
    Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
    Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
    rgds,
    Srini

  • How to create Automatic TO at MIGO

    Hi Guys
    How to create automatic Transfer order(WM)
    I need this after creation of MIGO
    Where I can see the TO number(Not TR)
    What are all the config setttings for this( Triggering Auto TO)

    Hi
    Use OMKX
    Or browse through
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Inventory Management>Activate Automatic TO Creation
    Regards
    Amuthan M
    Edited by: Amuthan M on Apr 22, 2009 3:12 PM

  • How to create automatic serial number for ticket in illustrator?

    How to create automatic serial number for ticket in illustrator?

    Check this out
    http://forums.adobe.com/message/1271310#1271310

  • How to create automatic timer process in BPM?

    Can anyone tell me how to create an automatic timer process in BPM?
    Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event?
    Thank you

    Hi,
    You can make use of Global Automatic activity to kick off your process at a particular time. Place a Global Automatic activity in your process and right click on the Global Automatic activity and select Properties --> General --> Global Automatic Type: Automatic Schedule, Automatic Schedule: <Configure with your requirement>.
    Else you can make use of due transition/timer activity to get your task done.
    Bibhu

  • How to create automatically users&roles in CUA and in chlid systems?

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    You can use one of the various ways Java EE provides you, e.g. container managed authentication.
    It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
    You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
    Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

  • How can create automatic billing?

    hi,
    I want to create automatic billing after creation the goods issue in delivery.
    I want to know how we can do it and is it necessary to use special user exit to program or not?
    Thank you.

    Hi Lida,
    Take the help of BASIS and give them the criteria as to for what billing types you want to do the Auto invoicing and then other criteria ( like docs with PGI or with out PGI n other ) save the criteria as variant and ask the BASIS team to run it at regular or required intervals...
    Also take a look at the below link if you wish to and check if any of the userexits meets your requirements.
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sdUserexits]
    Hope it helps
    Thanks and Regards
    Rohit.

  • How to create automatically pdf with automator

    Hello,
    Probably my problem has been posted many times on this forum. So, any help is more than welcome.
    I would like to create a workflow that creates automatically a pdf version of any file when dropped for example in a defined folder.
    Is it possible? Does someone have already a similar workflow working?
    Thanks in advance
    Regards
    Tom

    Sure, but you would do that if you have to convert one or two files.
    I am looking for a workflow which converts automatically into pdfs hundreds of word documents for example.
    thanks
    tommaso

  • How to create automatically users&roles in CUA and child systems

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    Thank you all. I got the solution.
    Regards
    Rajesh

  • How to create/automate a picklist in I/O Field of a screenPainter?

    Hi All,
    I have a screen: I/O box field and table control that will allow users to accept input.
    Please see the screen-shot below.
    http://img197.imageshack.us/img197/6526/ioboxnopicklist.jpg
    Declared in my top include as:
    DATA: P_WERKS LIKE T001W-WERKS. "Plant Master Table
    But during execution, I cannot see any picklist for the plant?  How can I automate it in the case of I/O field?
    I cannot declare PARAMATERS in my TOP include since my program is moduled.
    Thanks.
    Regards, Jaime

    Hi,
    Assign this H_T001W_C search help in the attributes of the field in the screen painter.
    Hope this helps you,
    Regards,
    Abhijit G. Borkar

  • How to create Automatic Delivery and Billing documents immediate

    Hello,
    I want to create Automatic delivery and billing documnets immediate once I create a sales order.
    E.g I need to see in the Status Bar the delivery and billing document was created.
    Thank you in advance
    Your help is highly appreciated
    Alfaid

    Please search in sales forum.  Many times this was discussed there.
    thanks
    G. Lakshmipathi

  • How to create automatic po from migo?

    enter Vendor
       Message no. M7018
    i want to create automatic PO from MIGO and i put the vendor in partner field vendor but this msg is issued

    Hi There
    Pre req for Auto PO
    1. Material master - P View- Auto PO enabled, and Material should be Valuated material and Procurement type should be F.
    2. Plant should be assigned to STD p Organ
    3. Vendor Master enable the Automatic PO
    4. Info Record with the Valid Price
    5. In Purchasing define default values for document type(PO) independent of transaction(MB01)
    6. Inventory Management- Movement Type- 101 and 161 Auto PO should be enabled
    7. Manual Entery @ the time of MIGO- Material , Plant, Location, Vendor and Qty
    You will get the PO, Material Document and Acc Document,,,
    Cheers
    Senthil

  • DTW : How to Create goods receipt with quantity exceeding purchase order ?

    Hello DTW Experts,
    is there any way to deliver or receive an quantity exceeding the quantiy of the purchase order using DTW, or the only way is to create additional order (create a goods receipt is based on a purchase order).
    When i try the system gives me these 2 different messages :
    1 - One of the base documents has already been closed  PDN1.BaseEntry[line: 1]Erreur définie par l'application ou par ...
    2 - One of the base documents has already been closed Erreur définie par l'application ou par l'objetoPurchaseDeliveryNotes
    Thanks,
    Hafid

    The best way is to draw the purchse order through then add an additional line to the Goods Receipt for the additional quantity. This will close the PO properly, but record the additional quantity

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • How to create automatic tasks when create a new room?

    Hi experts,
    I have a problem, i don´t know if this is possible.
    I want create a room, and i want that appear several tasks automatically, such a template, is it possible?
    Thanks in advance,
    Regards,

    The SWF file is to be sent to a commercial web site...I'm not sure if they would accept two SWF files, and all...And, as we can only have nine seconds of animation, we would have to alter the Auto Page Turn SWF. Hummm...
    So, it looks like Adobe didn't build an auto feature into ID... Anyway, thank you so much! This is very helpful...

Maybe you are looking for

  • Sharepoint Internet site with NLB via TMG

    I have configured two wfes in NLB, the nlb name is say 'spwebnlb' Using this name as 'hostheader' I have created a webapplication, so that I can access http://spwebnlb , I am able to achieve this. Now the issue is I want this site to be accessed with

  • Album from iPad to Mac

    Hi all, I have created some fot albums in iPad and I want to sync them in my Mac, my surprises is that I cannot do it ... What am I doing wrong? many thanks in advance regards

  • Runtime + Command window

    Hi, I am trying to execute Runtime.getRuntime().exec() command on click of a button. It works fine, but the problem is that i get a command window when the command is executed. Is there any way to make the command window not to appear?

  • Windows 7 sees my phone as my husband's..

    Windows 7 (64-bit) no longer recognizes my phone as the name that I originally set up for it. It sees it as my husband's phone. This only started after updating to iOS5 and the latest iTunes. Does anyone know how I can fix this? When we set up our ph

  • Motifs in illustrator CC moving around the artboard of their own accord! Help!

    I'm designing some motifs in Illustrator CC but every few minutes the design moves either left or right, entirely of its own accord. I'm using a PC, touch pad only and this is sometimes happening when I'm not touching the computer at all. Any help wo