How to create Autoplay DVD in Encore CS4

Hi guys,
New to editing so excuse the very simple question, but I need help. How do I set my dvd to Autoplay once I have built my project and insert it into my dvd player?. Everything is perfect except I need to manually press play to bring up my menu.
I used Premiere Pro CS4 to make the movie, then have done the menus etc in Enciore but can not find out any settings to make my disc autoplay. Any help would be much appreciated.
Regards,
Todd.

Hi there.
First play is Menu:Default
I've attached a screenshot so you can check it out. I'm really not sure why it just isn't playing?? Could it be the transcoding from Premiere Pro CS4?
Cheers,
Todd

Similar Messages

How to Create a DVD With No Menu?

hi there.
i've had DVD Studio Pro for a while and never used it.
would it be to hard to give me a step-by-step guidance on how to create a DVD from a QuickTime file in DVD Studio Pro (initially, in the form of a VIDEO_TS folder or IMG file) with no menus at all, so that it's played straight away once inserted into a stand-alone DVD player?
anyone, please?

If you are starting in SD and can use compressor, that works better: there are more knobs to twist to adjust the results to your liking. Going from HD to SD, I think compressor or a third party encoder is a must. Just too many things to tweek to get it right for the video you shot.
AC3 has another advantage in addition to file size: bit rate. There is a limit on what DVD players will handle - usually less than 10mb/s. And if you can have video + audio well under that, you disc will be compatible with more players. If can always put both on the DVD, and use a menu to let a user pick one, but you don't want menus yet, as you said. Many music DVDs do just that: PCM for best fidelity (it is noticeable on a really high end system that most mortals don't have), or DD, even 5.1 for everyone else.
Encoding: I use 7.5mb/s max for video, and adjust the "average" depending on how big my video is; I've used as low as 4.2 for stage plays and it was not too bad. If you have a short video, you might use CBR (contstant bit rate) at 7.5 for the best quality. I likewise adjust my AC3 bit rate; 192 stereo where I must save space and the original sound quality was not great anyway, up to whatever the max is (384, I think).
Eddie O

How to create a DVD from mts in Premiere

With my old camcorder I captured avi files in Premiere, exported them and created the DVD with Encore.
Now I have a new camcorder. I capture the files to the PC with the camcorders transfer utility and I imported the mts files in Premiere and cut them there.
As I want to export now I see that on File/export everything is greyed except AAF and Final cut pro XML. No idea what animals those are but certainly not the film/a format I can take to Encore to make the DVD.
As you see I am not an expert in all that and I have no idea now what to do. Can someone help me please ?
kind regards
Manfred

Select the timeline panel first, then the Media option will be available.

Can anyone tell me how to create a dvd from slideshow on my OSX10.9.5 that i can view on a tv

can anyone tell me how to create a dvd to play on my tv from a slideshow on my mac

Not in the Classic forum:
http://discussions.apple.com/docs/DOC-2463
Try iLife, iDVD, or iPhoto. AppleTV may also help.

How to create a dvd menu

hi!
how would I go about creating a dvd menu, either within a program or in a program that can be burned with another program? I have adobe and macromedia suites, so hopefully I have the programs that are necessary, but I don't even know where to begin.
thanks!
jtw
www.jtwilliams.org

Adobe Encore will create menus for you. Encore is now bundled with Premiere pro.

How to create a DVD menu like an animated Flash Menu?

Hello. I'm trying to figure out how to create an animated menu in Encore for a DVD, much like how menus are that are created in flash. How can I create one in Encore for a DVD menu? Thanks.

Use After Effects:
Adobe Encore * Using After Effects to enhance menus
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html

Want to create a dvd in encore, i have created dvd2-mpeg file and have timeline premiere?

hello guys
i hope you can help
i have adobe premiere cs6 and i have created a dvd2-mpeg file which i want to burn to dvd, its about 7 gb. i want to fit this on a single dvd or dual layer dvd if quality is a problem
i have been told encore can encode the files in the right format etc
please can you advise me on the steps i need to do so i can create a dvd disk please?
i have a macbook air which doesnt have a disk drive, so i will need the files to be copied on an external drive and burnt to a disk on another computer..

Hello, and welcome to the forums.
You'll need to put this onto a dual layer project, as single layer will only get you to 4.7GB (not quite as much as it seems, either, as DVD Gb are smaller than computer Gb are).
You do not mention anything about menus or navigational aids on your DVD - are these required?
Also, what form is your audio in please? MPEG audio is not a good idea, and for DVD use the files ideally need to be "Elementary streams", meaning separate video & audio files.
A simple slutiom might be to go back to your premiere pro project, and take the original timeline - before you transcoded it to MPEG-2 - and send this to Encore using Dynamic Linking. This will launch Encore for you, and place your premiere timeline into an Encore project.
There you can create your menus and set all your navigational stuff up.
When completed, simply compile the project to a DVD image - this will create an ISO file that can be moved for burning.
That's the short answer, but it can get a lot more complicated.
For starters, your audio file will need to be in a DVD compliant type- that means either LPCM or Dolby Digital.
LPCM is the best quality, but uses a lot more bits & reduces available space for your film so you need to decide how important the audio content is.
Encore will allow you to set the audio default to LPCM, and will then try to get the best fit for your video file in "Automatic" mode.
Once you can let me know the aswers above (are menus needed, what is your audio file) etc, I can walk you through the steps needed.

"Access Denied" DVD DL Encores CS4 in Win7 64b

Hello, I am new to this forum, so please bear with me on this. I, like others, have bounced off the "access denied" error when burning dvd+r dl in Encore CS-4. I did attempt the fix listed for vista, but I am using Win7 and have not been able to get it to work. Any solutions. Much appreciated. CR

I, too, am running into this problem. My files were on an external drive and so I had hoped this was the pro
blem but I just transfered to an internal SATA and re-created the project and I am still getting this error.
I would prefer to not have to use yet another program to create my DL DVD as Encore is supposed to be able to support this.
I am running win7 64b OS as an administrator and have all the latest CS4 updates. Help!

How to break layer(manually) in encore cs4

Hi,
My project is ready to burn and wish to know the procedure of how we can break layer manually in encore cs4 while burning 8.54 gb dual layer dvd.
Thanks in advance.
Vinay

When you go to Burn to Disc, you should have a dialog screen, where you can choose "Set Layer Break Automatically," or "Set Layer Break Manually." The exact syntax might be different, but you will get the picture.
Now, some with later versions (do not recall if CS4 was in this group), have encountered issues, where the manual Layer Breaks were disregarded. There are a few posts on this, and one was initiated by Jim Simon. You might want to look over those threads.
Also, many use the free ImgBurn to do the physical Burn, and like its manual Layer Break setting function better than Encore.
Personally, I have never had a Layer Break issue, but much of that probably stems from my particular Projects, and perhaps a bit of luck.
Good luck to you,
Hunt

How to create a dvd from iMovie '11

I have created a video in iMovie and am trying to transfer it to a DVD. However, there is no Export function. When I share the movie to a file it uses a .mp4 format which is then not able to be be burned to a disc. In the past, the extension was .mov and I was able to create a DVD without any problems.

You need iDVD.
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

How to create a DVD that can play on a computer

I've finally become familiar with using Premiere Pro CS3 and Encore. When I'm creating a DVD I understand that it will be played on any standard DVD player but I would also like to have it play on a computer. Is there a setting which will allow this to happen?
I've tried playing it on my PC as well as another, but nothing happens.
Have I overlooked something?
Thank you.

Persius,
Nearly every DVD that will play on a set-top player *should* play on a computer, provided two things:
1.) the computer has a DVD player that can handle that flavor of DVD media, DVD RW, DVD-R, DVD+R, DVD DL, etc.
2.) the computer has a software player installed. This feature has been removed from some common media players. You may need to locate, download and install a separate software player.
There could be another discussion on interlaced vs progressive scan media, but I'll let you ask that question.
Hunt

How to create a DVD from several FCP projects?

I'm strugeling to create a DVD. I feel like a fool because it used to go so easy with my old computer but with my new Mac it doesn't seem to work.....
What I'm doing:
- Footage MTS 1920x1080, 24Mbps .MOD files
- I upload them from my camera into FCP
- I make projects (let say 20 different ones)
- I want to put all the projects on 1 DVD as seperate 'chapters/ icons'
- With FCP I can only put one project at the time on a DVD, so that doesn't work
- I bought DVD creater to put the exports of FCP on a DVD, problem I can not create a export out of FCP that will be recognised by dvd creater.
I know that I will be able to convert my FCP export into something else by some programme. But this is a work around, I don't really want to do such a extra step because the quality will be lower.
Ik hope someone has a solution for me!
Kim

Hello T,
I have just exported the slideshow from iPhoto to the iPhoto Slideshow Folder, opening iDVD.
I selected create a new project as EJ3 in MoMs folder hit CREATE and iDVD quit, disappears,
THE iDVD icon is still active on the doc but how ever it is simply GONE,
this is the second time i tried this. I will restart the computer and come back and try it again.
OK. I restarted the Mac, opened iDVD, selected MAGIC iDVD and in the movie section EJ3 was no where to be found.
I will now close iDVD and try create a new project, saved MY GREAT DVD to the desktop.
Cannot find EJ3 or the other exported iPHOTO slide shows under Elizabeth.....
they are here
but I can't select, or import, or open in iDVD.
I am totally lost and thinking that this can't be done for some unknown reason.
I am thinking if iMOVIE is the way to go OR if I should delete iDVD and reinstall it from the iLIFE disk.
I am sorry for all this failure.
at a loss right now.

How to create a dvd for stereo and 5.1

Hi to everybody
I wonder if I can use stereo files (aiff and wave) to create a dvd that will work with a stereo system and a 5.1 system. I made a dvd before and one of the shortfilms couldn´t be read in 5.1, but the rest worked perfectly, so I don´t understand how it works. Do I have to make a menu for 5.1 another for stereo, or it could work with both?
Thank you

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

General Error when I try to out put DVD in Encore CS4

I have been trying to output a dvd from and encore project and am continually getting errors. I have imported mpg movie assets. I am working on Encore CS4 Windows XP. I get "General Error" message.
I have also tried other file formats like AVI and still got "Transcoding Failed"errors with the transcoding process, not one of the settings in Transcoding was working, that was when I went to mpg files, those are already dvd ready assets no transcoding necessary.
Any Help would be greatly appreciated.
Thank you

Thank you for responding.
I am on system Windows XP
Service Pack 3
I7 Processor
2.8 GHz, 3 GB Ram
HDD
Using 103 GB
Free Space 828 GB
Encore Project:
Simple Menu with 2 navigation buttons linked to two assets on seperate timelines.
The Assets:
mpg file Duration 0:36:40 File size 1.6 GB
mpg file Duration 0:38:47 File Size 1.8 GB
I just imported the assets as timelines, there are no chapter markers for navigation nor no editing on the timelines, I just want to output to DVD and I'm getting "General Error" When I start to build.
file fits on 4.7 DVD
DVD Transcode Settings are at "Don't Transcode"
DVD Transcode Status are at "Don't Transcode"
Hope that covers it, thank you so much for your help

HOW TO CREATE VIDEO DVD WITH ADOBE MEDIA ENCODER

I AM NEW TO ADOBE PREMIERE. AFTER SOME HOURS OF LEARNING FINALLY I FINISHED EDITING 30 MIN OF VIDEO. NOW I DONT KNOW HOW TO OUTPUT TO DVD ( VIDEO DVD ) TO PLAY IN DVD PLAYERS. PLS HELP.

Which version of Premiere? CC does not include Encore, but you can download the Encore CS6 from your account. As it is part of Premiere CS6, I believe you would need to download and install Premiere/Encore CS6, and then you can uninstall Premiere CS6, leaving Encore CS6 installed.
If you have Premiere CS6, then you already have Encore CS6. In either case, from Premiere, use File > Export > Media to open Media Encoder. For FORMAT, choose "MPEG-2 DVD", then choose an appropriate preset from the list. For instance, if editing with 1080i, then you might choose NTSC Widescreen High Quality. For 1080p, then use the Progressive version, etc.
What is your source video format? If starting with HD, then check the box at the bottom of AME for Max Render Quality, it helps with the scaling.
Hit EXPORT at bottom and it exports two files, an .m2v for video and .wav for audio. Open Encore, start a New DVD project, and then File > Import > As Timeline and grab both those files for import. From there, I recommend finding an Encore tutorial, too involved for me to type it all out here.
Hope this gets you going at least, but search online for tutorials, there is plenty of good, free stuff out there
Thanks
Jeff Pulera
Safe Harbor Computers

How to create Autoplay DVD in Encore CS4

Similar Messages

Maybe you are looking for